PowerDVD6 audio Coded reg settings PLEASE check :) (1 Viewer)

MrMario64

Retired Team Member
  • Premium Supporter
  • April 22, 2004
    822
    1
    50
    Home Country
    Netherlands Netherlands
    Hi,

    We want to have a better sound setup system in Mediaportal.
    As this depends on the codec used we will be starting with PowerDVD6

    Could people please check these things?

    PowerDVD puts it's own settings in 1 folder in the reg namely:
    HKEY_CURRENT_USER\Software\Cyberlink\PowerDVD

    For other apps it splits between audio and video.
    Mediaportal audio codec stuff will be in:
    HKEY_CURRENT_USER\Software\Cyberlink\Common\CLAud\MediaPortal

    Mediaportal will have a similar setup interface as the AUDIO setup tab in powerdvd6.

    This is what I have so far.
    I think it's pretty complete.

    -------------------------------------------------------------------
    PowerDVD regs:
    Audio settings are in:
    HKEY_CURRENT_USER\Software\Cyberlink\Common\CLAud\MediaPortal
    AU_DRC_MODE
    Dynamic Range COmpression
    1=Quiet Environment (default)
    Full dynamic range of digital audio
    2=Normal Environment
    compressed dynamic range
    3=Noisy Environment
    Boosted sound, recommended for notebook users

    AuDsChanExpand
    effected by Output mode
    1=Stereo or no effect
    2=Dolby pro Logic II
    4=CLMEI-2

    AuDsCLHMode
    Cyberlink Headphone Mode
    1=Living room
    2=Theater
    3=Stadium

    AuDsCLVSMode
    Cyberlink Virtual Speaker Mode
    1=Living room
    2=Theater
    3=Stadium

    AuDsCntrMix

    AuDsDHMode
    Dolby Headphone Mode
    1=Small room model
    2=Conference room (default)
    3=Movie theater model

    AuDsDnmx
    effected by outputmode and speaker environment
    2 =stereo or SPDIF
    8 =Dolby Surround Compatable Downmix
    40 =4 speaker
    80 =6 speaker
    800 =7 speaker
    1000 =8 speaker
    200 =Dolby Headphone
    10000=Cyberlink Virtual Speaker
    2000 =Dolby Virtual Speaker
    8000 =Cyberlink Headphone

    AuDsDualMono

    AuDsDVSMode
    Dolby Virtual Speaker Mode
    4=Reference
    5=Wide 1
    6=wide 2

    AuDsFocusLevel
    AuDsFocusOn

    AuDsInterface
    Speaker Environment
    What sound replicators are we driving? :)
    20000=Headphone
    8 =2 speakers
    10 =4 speakers
    20 =6 speakers
    4 =SPDIF
    40 =7 speakers
    80 =8 speakers

    AuDsMEIMode
    CLMEI-2 output mode
    16=Movie Playback (default)
    14=Music Mode Standard
    15=Music Mode On Stage

    AuDsMEIVolCenter
    CLMEI-2 Center speaker Volume
    30 steps, ranges from -30 db to 0 db
    0db = 1e (default)
    -30db = 0

    AuDsMEIVolFront
    CLMEI-2 Front speaker Volume
    30 steps, ranges from -30 db to 0 db
    0db = 1e (default)
    -30db = 0

    AuDsMEIVolLFE
    CLMEI-2 LFE channel Volume
    30 steps, ranges from -30 db to 0 db
    0db = 1e (default)
    -30db = 0

    AuDsMEIVolRear
    CLMEI-2 Rear speaker Volume
    30 steps, ranges from -30 db to 0 db
    0db = 1e (default)
    -30db = 0

    AuDsPL2Mode
    Pro Logic 2 output mode
    2=Music Mode
    3=Movie Mode (default)
    5=DDEX (Dolby DIgital EX)

    AuDsPL2XCntrWidth
    AuDsPL2XPanorama
    AuDsSpkSize
    AuDsTBLevel
    AuDsTBOn
    AuDsTSOn

    LFEON
    Mixes LFE channel with front left and right channel
    Recommended for headphone,2 or 4 speaker setups. DESELECT if speakers cannot handle 120Hz and below or they may damage.
    0=off
    1=On
    ----------------------------
    What to change on which mode
    Speaker environment:
    headphone: Set Audsinterface @ 20000
    stereo : Set AuDsDnmx @ 2 and AuDsChanExpand @ 1
    dolby surround compatible downmix : Set AuDsDnmx @ 8
    dolby headphone : Set AuDsDnmx @ 200
    cyberlink headphone : Set AuDsDnmx @ 8000

    SPDIF: Set Audsinterface @ 4 and Set AUDsDnmx @ 2

    2 speaker: Set Audsinterface @ 8
    stereo : Set AuDsDnmx @ 2 and AuDsChanExpand @ 1
    dolby surround compatible downmix : Set AuDsDnmx @ 8
    dolby virtual speaker : Set AuDsDnmx @ 2000
    cyberlink virtual speaker : Set AuDsDnmx @ 10000

    4-8 speaker: 4 speakers Set Audsinterface @ 10 and AuDsDnmx @ 40
    6 speakers Set Audsinterface @ 20 and AuDsDnmx @ 80
    7 speakers Set Audsinterface @ 40 and AuDsDnmx @ 800
    8 speakers Set Audsinterface @ 80 and AuDsDnmx @ 1000
    No effect : Set AuDsChanExpand @ 1
    Dolby Prologic 2 : Set AuDsChanExpand @ 2
    CLMEI-2 : Set AuDsChanExpand @ 4
    ---------------------------------------------
     

    Users who are viewing this thread

    Top Bottom