[confirm] Problem playing recorded TV in RC2 (1 Viewer)

gyring_eddy

MP Donator
  • Premium Supporter
  • January 2, 2008
    19
    0
    United Kingdom United Kingdom
    MediaPortal Version: 1.1.0 RC2 Revision:25546
    MediaPortal Skin: Blue3 Wide
    Windows Version: Windows 7 Home Premium 64 bit
    CPU Type: Intel Atom N330 dual core 1.6GHz
    HDD: Samsung Spinpoint F3 1TB
    Memory: 2GB (2x1GB DDR2)
    Motherboard: Zotac IONITX-F
    Video Card: Integrated nVidia ION
    Video Card Driver: 196.21
    Sound Card: Integrated Realtek HD audio
    Sound Card AC3: no AC3
    Sound Card Driver: 6.0.1.5845
    1. TV Card: Black Gold BGT3540
    1. TV Card Type: Dual DVB-T or dual analog + dual DVB-S
    1. TV Card Driver: 6.0.0.49
    2. TV Card:
    2. TV Card Type:
    2. TV Card Driver:
    3. TV Card:
    3. TV Card Type:
    3. TV Card Driver:
    4. TV Card:
    4. TV Card Type:
    4. TV Card Driver:
    MPEG2 Video Codec: MPC - MPEG-2 Decoder Filter (Gabest)
    MPEG2 Audio Codec: MPC - MPA Decoder Filter
    h.264 Video Codec: ffdshow
    Satelite/CableTV Provider:
    HTPC Case: Silverstone ML02B-MXR
    Cooling: Embedded CPU heatsink + 60mm fan, 80mm case fan
    Power Supply: Integrated 120W
    Remote: Philips SRM 5100 Vista remote
    TV: Samsung LE32R74 32" LCD
    TV - HTPC Connection: HDMI

    Third party codecs and filters:
    Combined Community Codec Pack 09.09.2009
    DScaler5 (not used)
    ReClock (not used)

    If the first video I try and play after starting MP is an existing TV recording, I get the error message:

    Unable to Play: TV Show.ts
    Video codec: MPEG VIDEO VERSION 2
    Audio codec: MPEG AUDIO VERSION 1 LAYER 2​

    Live TV and other videos work fine. However, if I start then stop either live TV or a video from my library, this resolves the issue and recorded TV shows subsequently work fine as well. Changing TV codecs in the config utility has no effect - the Microsoft DTV codecs and DScaler produce the same problem.

    I just did a clean install of RC2, having been using 1.1.0 BETA without issue. Fortunately TV recording works fine, so the problem isn't critical - just annoying!

    Logs are attached, any suggestions would be appreciated.
     

    elliottmc

    Retired Team Member
  • Premium Supporter
  • August 7, 2005
    14,927
    6,061
    Cardiff, UK
    United Kingdom United Kingdom
    Country flag
    I would recommend trying microsoft filters rather than MPA/MPC, and also remove all codec packs. I know this shouldn't be necessary, but it might help narrow down the problem.

    Mark
     

    gyring_eddy

    MP Donator
  • Premium Supporter
  • January 2, 2008
    19
    0
    United Kingdom United Kingdom
    Thanks for the suggestion, I just uninstalled CCCP and retried the Microsoft codecs but the issue remains.
     

    elliottmc

    Retired Team Member
  • Premium Supporter
  • August 7, 2005
    14,927
    6,061
    Cardiff, UK
    United Kingdom United Kingdom
    Country flag
    Thanks for the suggestion, I just uninstalled CCCP and retried the Microsoft codecs but the issue remains.
    You could try to use filmerit to diagnose filter problems.

    Filmerit

    I don't doubt that you are having a problem. I just don't think it is a mediaportal problem as such. Codec packs are a nightmare for messing up your system, which is why I avoid them like the plague.

    MArk
     

    gyring_eddy

    MP Donator
  • Premium Supporter
  • January 2, 2008
    19
    0
    United Kingdom United Kingdom
    I never had any problems with CCCP before, but I suppose it's never too late.

    Anyway, I ran Filmerit as suggested and it found zero errors. I then uninstalled ReClock just in case, and used Filmerit to clean up the 2 redundant registry entries it left behind. No effect on mediaportal.

    Perhaps reinstalling RC2 after the recent changes might help.

    Thanks again.
     

    arion_p

    Retired Team Member
  • Premium Supporter
  • February 7, 2007
    3,373
    1,626
    Athens
    Greece Greece
    Country flag
    I've seen this once or twice on my RC2 setup too with the same error:
    Code:
    2010-04-15 15:40:58.323200 [ERROR][MPMain(1)]: TSReaderPlayer: Exception while creating DShow graph Retrieving the COM class factory for component with CLSID {B9559486-E1BB-45D3-A2A2-9A7AFE49B23F} failed due to the following error: 800700c1.
    The component referred to is TsReader, but I cannot understand if it is a code issue or installation issue. Also I have not found a definite description of the error code (800700c1).

    I'll investigate further.
     

    tourettes

    Retired Team Member
  • Premium Supporter
  • January 7, 2005
    17,301
    4,800
    I've seen this once or twice on my RC2 setup too with the same error:
    Code:
    2010-04-15 15:40:58.323200 [ERROR][MPMain(1)]: TSReaderPlayer: Exception while creating DShow graph Retrieving the COM class factory for component with CLSID {B9559486-E1BB-45D3-A2A2-9A7AFE49B23F} failed due to the following error: 800700c1.
    The component referred to is TsReader, but I cannot understand if it is a code issue or installation issue. Also I have not found a definite description of the error code (800700c1).

    I'll investigate further.
    HRESULT: 0x800700c1 (2147942593)
    Name: ERROR_BAD_EXE_FORMAT
    Description: n/a
    Severity code: Failed
    Facility Code: FACILITY_WIN32 (7)
    Error Code: 0x00c1 (193)

    "quite" odd.
     

    disaster123

    MP Donator
  • Premium Supporter
  • May 14, 2008
    3,546
    432
    Germany Germany
    Country flag
    AW: Problem playing recorded TV in RC2

    I have exactly the same problem since RC2. To solve this i've to start LiveTV first - then i can start looking video files (ts files)
     

    disaster123

    MP Donator
  • Premium Supporter
  • May 14, 2008
    3,546
    432
    Germany Germany
    Country flag
    AW: Problem playing recorded TV in RC2

    gyring_eddy
    were you able to fix it? it's really annoying bug at the moment for me.
     

    Fredvr

    Portal Member
    February 27, 2009
    8
    0
    Netherlands Netherlands
    If had the same codec error when 'playing' H.264 and .m2t video files after installing RC1. Just deinstalled all codec packages and removed mediaportal complete (with all history files\settings\etc) and did a fresh installation of RC2.
    In both RC1 and RC2 I did not install the TV part.

    It looks like it's using that TV part for loading\initializing the required codecs.. (In VLC everything is playing fine)

    fred
     

    Users Who Are Viewing This Thread (Users: 0, Guests: 1)

    OP Similar threads Forum Replies Date
    C Problem playing videos created on IPhone X and Samsung S9 General Support 2
    Edwardfc [solved] Mp 2.2.1 Configuration Issues - Goes to Sleep while playing Music General 6
    T Mp 1.20 won't play .265 hdr capable file......settings problem? logs inc. Watch / Listen Media 0
    F Problems with new install of MP2 Newcomers Forum 3
    A [solved] DiseqC problems after upgrade to 1.25 General Support 9
    M Problems with VFD Display after standby- Futaba DM140GINK Mini Display 0
    R Connection (api) problems with thetvdb.com General 3
    123vak123 [solved] 5008: The problem with scrolling text in the "listcontrol" in 4K General Support 22
    framug 1.24.0 1.25.0 pre : problem with build ? 1.24 Pre Release 89
    J Problems with 1.24 StreamedMP 19
    Rob Hexenmeister Navigation problems adding menu buttons to EPG General Support 1
    404 [solved] EPG problem after Win10 'upgrade' General Support 1
    framug [EPG] Some problems with DVB EPG Improvement Suggestions 49
    C strange tuner(?) problem TV-Cards 0
    R Problems accessing MySQL database remotely MediaPortal 1 Talk 0
    T [solved] Startup problem General 6
    G Problems with DRR MediaPortal 1 Talk 1
    rsbrux 1.23.0 MPE Manager Problem with LAV Filters Bugreports 2
    S Problem with Remote Control One-for-all Streamer Newcomers Forum 6
    joecrow Default Wide HD Xmas Theme Problem General Support 3
    K Sleep mode problem after formating General Support 2
    P IPTV Channel Problem TV-Server 0
    nominefi Problem scanning channels. General Support 0
    E Swedish subtitles problem General 2
    G Newb trying MP2, trouble with guide data General 5
    Top Bottom