ProjectX skin with touchscreen. How to use fullscreen TV? (1 Viewer)

tommer

Portal Member
February 20, 2005
16
0
Hello

I'm using the excellent Project X on my touchscreen in the kitchen.

Have some questions though:

1. How do I escape fullscreen TV?
2. How do I change channel?

Regards
Tom
 
E

Energy Blue

Guest
What you really need is a skin that is touch-screen compatable.
But for now...

1. Channel Changing :- Enter My TV, then click on the channel button
(making sure the pointer stays above the channel button)
Then you should see to arorrows on the sides, click them to change the channel.

2. Exit Fullscreen :- Drag the pointer to the top of the screen, then some
buttons should appear, click the 'X' button.

I hope this helps. :D
 

Harley

Retired Team Member
  • Premium Supporter
  • May 7, 2004
    2,053
    1,993
    Germany
    Home Country
    Germany Germany
    Hi tommer,

    i think you will change the channel with only use the touchscreen without using a remote or a keyboard right ?

    for this you must point in the button of the screen, than appears the osd.
    In the osd you can use the arrows on the left side to change the channels.

    If you would go back from fullscreen with only use the touchscreen without using remote or keyboard i make you a new button in the osd so that you can go with this button back. I think that will usefull for all touchscreenusers. I put the new button into cvs in the next days.

    You can see this in the screenshot.

    I hope it will help you. :)

    Touchscreenosd.jpg

    btw thanks that you love the skin :wink:
     

    Harley

    Retired Team Member
  • Premium Supporter
  • May 7, 2004
    2,053
    1,993
    Germany
    Home Country
    Germany Germany
    energy Blue

    1. Channel Changing :- Enter My TV, then click on the channel button
    (making sure the pointer stays ........

    ..i think tommer means the channelchanging in Fullscreentv

    2. Exit Fullscreen :- Drag the pointer to the top of the screen, then some
    buttons should appear..............

    ..in the fullscreentv there is no topbarfunktion possible.

    btw i think ProjectX is touch-screen compatable, see the new basichomescreen.

    Greetings Harley
     

    tommer

    Portal Member
    February 20, 2005
    16
    0
    Harley said:
    Hi tommer,

    i think you will change the channel with only use the touchscreen without using a remote or a keyboard right ?

    for this you must point in the button of the screen, than appears the osd.
    In the osd you can use the arrows on the left side to change the channels.

    If you would go back from fullscreen with only use the touchscreen without using remote or keyboard i make you a new button in the osd so that you can go with this button back. I think that will usefull for all touchscreenusers. I put the new button into cvs in the next days.

    You can see this in the screenshot.

    I hope it will help you. :)


    btw thanks that you love the skin :wink:

    This is exactly what I'm looking for! :)

    But, how do I show the osd in the lower part of the screen?
     

    Users who are viewing this thread

    Similar threads

    How do you add a new selection to the TV Guide Rows option in the BasicHome Editor in DWHD? Id like to add an option for 8 Rows. Which xmls should I be looking at to change.? Thanks!
    How do you add a new selection to the TV Guide Rows option in the BasicHome Editor in DWHD? Id like to add an option for 8 Rows...
    How do you add a new selection to the TV Guide Rows option in the BasicHome Editor in DWHD? Id like to add an option for 8 Rows...
    Replies
    0
    Views
    279
    Nice finding! (y)(y)(y) Adapted to new DWHD and PVHD ;) Position is in front of category bar ;)
    Nice finding! (y)(y)(y) Adapted to new DWHD and PVHD ;) Position is in front of category bar ;)
    This thread is intended for skin authors, plus those advanced users who have learnt skin programming and have customised the skins...
    Replies
    1
    Views
    900
    Attached are new TV service logs with your latest DLL. I see lots of EPG events and none of the messages from earlier. Congratulations!
    Attached are new TV service logs with your latest DLL. I see lots of EPG events and none of the messages from earlier. Congratulations!
    I have some weird behavior trying to operate the MP GUI in a new installation of MP 1.36 under Windows 11 Pro. Some of the remote...
    Replies
    33
    Views
    2K
    MP1 MP2 Case Downsizing DE
    Most (all?) small PC cases accept only ITX motherboards, which have only one PCI-E slot. So you could install only one PCI-E tuner card. A quad-tuner card would give you four tuners, but if you wanted more tuners you would need to use the TBS eight-tuner card, or use external tuners, either USB tuners (available with single or dual...
    Most (all?) small PC cases accept only ITX motherboards, which have only one PCI-E slot. So you could install only one PCI-E tuner...
    I've been using MP2 now for about 3 years: I really happy with the way it works, although I can think of many great features I'd...
    Replies
    1
    Views
    631
    I also have never used a set-top box with MP, but I think that you need to use an IR emitter (aka "IR blaster"). The IRSS software controls the emitter, and transmits IR signals under the direction of MP. The IR signal is received by the IR receiver within the set-top box, and so can be used to change channel and so on. The set-top...
    I also have never used a set-top box with MP, but I think that you need to use an IR emitter (aka "IR blaster"). The IRSS software...
    My computer is running Windows 10 Pro. I have installed MP2. Not sure what version. I have a Hauppauge WinTV 1850 TV card...
    Replies
    8
    Views
    2K
    Top Bottom