Reply to thread

Message

<blockquote data-quote="ArnoldGoat" data-source="post: 1302568" data-attributes="member: 51533">
<ol>
<li data-xf-list-type="ol">The card needs to support DVB-S2 and MP1 needs to be recent. I think DVB-S2 was supported from 1.35.</li>
<li data-xf-list-type="ol">Open up TV Server config.</li>
<li data-xf-list-type="ol">expand TVservers, then name or IP address of your server, then the TV card. You should see something like this:<img src="https://www.maybros.nz/weather/images/fig1.png" alt="" class="fr-fic fr-dii fr-draggable " style="" /></li>
<li data-xf-list-type="ol">Set the settings to match the screen shot. This is for the first transponder. Your LNB may not be at 11300.</li>
<li data-xf-list-type="ol">Press SCAN FOR CHANNELS.</li>
<li data-xf-list-type="ol">It should find some channels. When it's done, you should see this: <img src="https://www.maybros.nz/weather/images/fig2.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Press NEW SCAN (not OK, or you will have to start from 1.)</li>
<li data-xf-list-type="ol">Repeat 4-6 for each of the transponders shown below, but changing the advanced tuning options to suit. These 3 cover the Freeview offerings. (The first one is the same as the screenshot.)</li>
<li data-xf-list-type="ol">If you have more than 1 TV card, repeat 3-7 but select the next card in step 3.</li>
</ol>Transponders:TP22 12484800 kHz&nbsp; 22500 sample rate FEC 4/5&nbsp; rolloff 0.2TP14 12530000 kHz&nbsp; 30000 sample rate FEC 2/3&nbsp; rolloff 0.2TP21 12455200 kHz&nbsp; 22500 sample rate FEC 3/4&nbsp; rolloff 0.2I think the xml file has got this data, but the ini file is stored at Mediaportal and looks like the transponder list, except it doesn't seem to match Optus D1. The 'new' satellite is Koreasat6 and it's at 159.9E, pretty close to Optus D1 (or is it D2) at 160E.Good luck.Ken</blockquote>

[QUOTE="ArnoldGoat, post: 1302568, member: 51533"] [LIST=1] [*]The card needs to support DVB-S2 and MP1 needs to be recent. I think DVB-S2 was supported from 1.35. [*]Open up TV Server config. [*]expand TVservers, then name or IP address of your server, then the TV card. You should see something like this:[IMG]https://www.maybros.nz/weather/images/fig1.png[/IMG] [*]Set the settings to match the screen shot. This is for the first transponder. Your LNB may not be at 11300. [*]Press SCAN FOR CHANNELS. [*]It should find some channels. When it's done, you should see this: [IMG]https://www.maybros.nz/weather/images/fig2.png[/IMG]Press NEW SCAN ([I]no[/I]t OK, or you will have to start from 1.) [*]Repeat 4-6 for each of the transponders shown below, but changing the advanced tuning options to suit. These 3 cover the Freeview offerings. (The first one is the same as the screenshot.) [*]If you have more than 1 TV card, repeat 3-7 but select the next card in step 3. [/LIST] Transponders: TP22 12484800 kHz 22500 sample rate FEC 4/5 rolloff 0.2 TP14 12530000 kHz 30000 sample rate FEC 2/3 rolloff 0.2 TP21 12455200 kHz 22500 sample rate FEC 3/4 rolloff 0.2 I think the xml file has got this data, but the ini file is stored at Mediaportal and looks like the transponder list, except it doesn't seem to match Optus D1. The 'new' satellite is Koreasat6 and it's at 159.9E, pretty close to Optus D1 (or is it D2) at 160E. Good luck. Ken [/QUOTE]

Verification