schduled recording not started if watching other channel (1 Viewer)

[infinite.loop]

Windows Version: WindowsXP MCE 2005 RU2
CPU Type: AMD AthlonXP 3000+
Memory: 512 MB DDR PC3200
Motherboard: Asus A7N8X Deluxe
Motherboard Chipset: Nvidia nforce2
Motherboard Bios: Award 1008
Video Card: WinFast A6600 GT TDH-128 (S-Video out)
Video Card Driver: Forceware
Sound Card: realtek
Sound Card AC3: coaxial out/ optical out
Sound Card Driver: 1.16
1. TV Card: Technisat Skystar 2
1. TV Card Type: DVB-S
1. TV Card Driver: 4.4.0
2. TV Card: no 2nd TV Card installed
2. TV Card Type: no 2nd TV Card installed
2. TV Card Driver: no 2nd TV Card installed
Video Codec: mpeg2dec
Audio Codec: mpedg/ac3/dts
Satelite/CableTV Provider: Astra 19.2°E
HTPC Case: standard ATX case
Power Supply: Bequite 400W
Remote: Microsoft MCE Remote
TV: Panasonic 16:9
TV - HTPC Connection: S-Video

SVN-Snapshot: 26-04-2006

Steps to reproduce:

1. 19:00 Schedule a recording on Kabel1 (starts 19:15)
2. 19:05 tune to Sat1 and switched to fullscreenTV
3. 19:09 MediaPortal showing pop up message "recording is about to start"
4. 19:10 MediaPortal should switch the channel to Kabel1 and start to record, but it doesnt. still showing SAT1
   

   26.04.2006 19:10:23 DVBGraph:FAILED cannot add StreamBufferSink:4022D
   26.04.2006 19:10:23 DVBGraph:Unable to create sinksource()

5. 19:15 MediaPortal still not switched the channel, still not recording, but now displaying KABEL1 EPG info in MyTV Home
   

   26.04.2006 19:15:24 DVBGraph:FAILED cannot add StreamBufferSink:4022D
   26.04.2006 19:15:24 DVBGraph:Unable to create sinksource()

6. switch the channel
7. MediaPortal dissables TV, stil not recording
8. impossible to activate TV

xactly the same with floppydtv dvb-s

 

[Ralph]

Windows Version: Win MCE 2005 SP2
CPU Type: Intel Celeron 2,4 GHz
Memory: 521 MB DDR
Motherboard: Asus P4Pdeluxe
Motherboard Chipset:
Motherboard Bios:
Video Card: ATI Radeo 9200
Video Card Driver: Catalyst 5.10
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge PVR 350
1. TV Card Type: analog
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
Video Codec: Nvidia
Audio Codec: Nvidia
Satelite/CableTV Provider: Kabelcom, Wolfsburg, Germany
HTPC Case:
Power Supply:
Remote:
TV:
TV - HTPC Connection:

This is working for me.

Just made a test right now:
1. 21:48 scheduled a recording on 3Sat at 22:00
2. 21:48 tuned to Pro7 and switched to fullscreen
3. 21:55 MediaPortal showing pop up message "recording is about to start"
4. 22:00 MP switched to 3Sat and is recording the show

I'm using the SVN from today 27.04.2006


Regards
Ralph

 

[voltagex]

Windows Version: XP Pro SP2 + April Hotfixes
CPU Type: AMD 2500+ (currently at stock speed)
Memory: 1GB 333mhz
Motherboard: DFI AD77
Motherboard Chipset: KT400
Motherboard Bios: Unknown - never flashed
Video Card: Geforce 6600GT AGP 256MB
Video Card Driver: Latest as of 1st May

Sound Card: AC97 chip
Sound Card AC3: AC97 chip
Sound Card Driver: latest realtek

1. TV Card Type: DVB-T/Analogue Hybrid
1. TV Card Driver: 1.0.2.27 in Device manager, 6.0.x according to Avermedia
1. TV Card: Avermedia Hybrid+FM PCI

Video Codec: ? NVidia PureVideo/Default (I don't think the NVidia one is used)
Audio Codec: ? Default

Power Supply: Antec SmartPower 400w
Remote: not used, standard avermedia remote, not compatible
TV: 20years old
TV - HTPC Connection: SVideo --> VCR --> Coax --> TV


Logs attached. The steps to reproduce are exactly the same as everyone else, it can also be a Manual record on Chan 1, Scheduled record on Chan 2, keeps recording on Chan 1 with the "recording is about to start" popup.

 

[tom1502]

i've made the same experience as i-loop, so no logs or report, it just was Kabel1 to Vox, but everything else equals!

 

[Ralph]

Can you test again with latest SVN, please?
It's still working for me.

Regards
Ralph

 

[infinite.loop]

Windows Version: WindowsXP SP2
CPU Type: AMD AthlonXP 3000+
Memory: 512 MB DDR PC3200
Motherboard: Asus A7N8X Deluxe
Motherboard Chipset: Nvidia nforce2
Motherboard Bios: Award 1008
Video Card: WinFast A6600 GT TDH-128 (S-Video out)
Video Card Driver: Forceware
Sound Card: realtek
Sound Card AC3: coaxial out/ optical out
Sound Card Driver: 1.16
1. TV Card: Technisat Skystar 2
1. TV Card Type: DVB-S
1. TV Card Driver: 4.4.0
2. TV Card: no 2nd TV Card installed
2. TV Card Type: no 2nd TV Card installed
2. TV Card Driver: no 2nd TV Card installed
Video Codec: Intervideo WinDVD7
Audio Codec: MPA
Satelite/CableTV Provider: Astra 19.2°E
HTPC Case: standard ATX case
Power Supply: Bequite 400W
Remote: Microsoft MCE Remote
TV: Panasonic 16:9
TV - HTPC Connection: S-Video

svn-snapshot: 06-09-2006
still occuring.
warning pop up is shown, MediaPortal does not switch the channel, does not record

 

[infinite.loop]

Windows Version: WindowsXP XP SP2
CPU Type: AMD AthlonXP 3000+
Memory: 512 MB DDR PC3200
Motherboard: Asus A7N8X Deluxe
Motherboard Chipset: Nvidia nforce2
Motherboard Bios: Award 1008
Video Card: WinFast A6600 GT TDH-128 (S-Video out)
Video Card Driver: Forceware
Sound Card: realtek
Sound Card AC3: coaxial out/ optical out
Sound Card Driver: 1.16
1. TV Card: Technisat Skystar 2
1. TV Card Type: DVB-S
1. TV Card Driver: 4.4.0
2. TV Card: no 2nd TV Card installed
2. TV Card Type: no 2nd TV Card installed
2. TV Card Driver: no 2nd TV Card installed
Video Codec: InderVideo WinDVD7
Audio Codec: MPA
Satelite/CableTV Provider: Astra 19.2°E
HTPC Case: standard ATX case
Power Supply: Bequite 400W
Remote: Microsoft MCE Remote
TV: Panasonic 16:9
TV - HTPC Connection: S-Video

SVN-Snapshot: 06-18-2006

1. enter MyTV on 09:09
2. tune Sat1
3. schedule a recoring on Kabel1 that starts on 09:15
4. go to MyTV fullscreen and watch SAT1
5. 09:10 warning message that a scheduled recordning is about to start is displayed
   have not pressed any button, after a few seconds message pop up is gone.
   View attachment 634
6. 09:15 MP still not switched to Kabel1
7. go to MyTV home
8. MP is displaying the EPG info for Kabel1, but still tuned to SAT1
   View attachment 638
9. try to switch to Kabel1 -> doesnt work, MP "thinks" Kabel1 is allready tuned
   View attachment 635
10. switch to Pro7 -> TV goes off
    View attachment 636
11. try to activate TV -> doenst work
12. rec button is now displayed and Timeshift is enabled, TV is still disabled
    View attachment 637
13. MediaPortal may "think" it is recording, but no file is generated

 

[kkendall]

So the popup should still be there?
At the moment, when I'm watching tv and a recording is about to start, the tv freezes without any warning... Very anoying when watching live HD Euro 2008 with your friends! :s So with me, it's DEFINATELY recording another channel when watching tv...unfortunately without warning.
I thought the devs removed the popup...Any suggestions of how I can get the popup back again?

 

[disaster123]

The popup will be back in the next SVN. You have answered to an 2 years old thread regarding 0.2.0.0 RC4 release.

 

[seco]

So the popup should still be there?
At the moment, when I'm watching tv and a recording is about to start, the tv freezes without any warning... Very anoying when watching live HD Euro 2008 with your friends! :s So with me, it's DEFINATELY recording another channel when watching tv...unfortunately without warning.
I thought the devs removed the popup...Any suggestions of how I can get the popup back again?

I just checked out the source code. For some reason the code for this popup window & logic is commented out
Alas, there is however no explanation what is the reason that the popup is disabled.

I've had problems with this issue too and it's really annoying..