Reply to thread

Message

<blockquote data-quote="blake2415" data-source="post: 259818" data-attributes="member: 71906">Hello,I'm having a pretty irritating problem.&nbsp; I can't get most of the channels between 150 thru 700.&nbsp; When MP scans it finds all the channels below 150, then it oddly finds 700 thru about 730 which are the HD channels.&nbsp;&nbsp; It misses 150 thru 699 and 731 or so thru 999.&nbsp; Schedules Direct plugin finds all the channels but those that were originally missing from MP's scan find themselves as extrernal channels with a 25000/xxx channel number (xxx is the number of the channel) but when selecting these the channel IR just does nothing.&nbsp; Sometimes you get a blank screen but almost always you get the audio stil from the last working channel.I've been messign with this about a&nbsp; week now and I'm lost with it.I'm using MP with HAVA Media, which connects to my Motorola HD STB cable box.&nbsp;&nbsp; HAVA captures the Component signal, transmits it via eithernet to my pc where a HAVA client apparently acts like a TV card for MP.&nbsp; &nbsp; The IR is built in and apparently works perfectly since I can view and change all channels except for those that Schedules Direct adds in.&nbsp; Interestingly, I can delete the upper channel, re-enter it in simple form..&nbsp; IE:&nbsp; Channel and Name&nbsp; - 630 HBO channel 630, just like the original channels scanned are saved by MP, but they still won't work.&nbsp; Only if I take a channel that was originally found can I replace the data for channel number in that spot and it will work.&nbsp;&nbsp; For example,&nbsp; I can take 101 and change it to be 755 and it will work, but I cant manuall add 755.It seems to me there should be a way to just scan and watch but thus far I've had no luck.ANy&nbsp; comments?Bill</blockquote>

[QUOTE="blake2415, post: 259818, member: 71906"] Hello, I'm having a pretty irritating problem. I can't get most of the channels between 150 thru 700. When MP scans it finds all the channels below 150, then it oddly finds 700 thru about 730 which are the HD channels. It misses 150 thru 699 and 731 or so thru 999. Schedules Direct plugin finds all the channels but those that were originally missing from MP's scan find themselves as extrernal channels with a 25000/xxx channel number (xxx is the number of the channel) but when selecting these the channel IR just does nothing. Sometimes you get a blank screen but almost always you get the audio stil from the last working channel. I've been messign with this about a week now and I'm lost with it. I'm using MP with HAVA Media, which connects to my Motorola HD STB cable box. HAVA captures the Component signal, transmits it via eithernet to my pc where a HAVA client apparently acts like a TV card for MP. The IR is built in and apparently works perfectly since I can view and change all channels except for those that Schedules Direct adds in. Interestingly, I can delete the upper channel, re-enter it in simple form.. IE: Channel and Name - 630 HBO channel 630, just like the original channels scanned are saved by MP, but they still won't work. Only if I take a channel that was originally found can I replace the data for channel number in that spot and it will work. For example, I can take 101 and change it to be 755 and it will work, but I cant manuall add 755. It seems to me there should be a way to just scan and watch but thus far I've had no luck. ANy comments? Bill [/QUOTE]

Verification