- December 2, 2005
- 11
- 0
- 47
Windows Version: Windows XP pro SP2
CPU Type: Athlon +2400
Memory: 1 GB
Motherboard: Biostar
Motherboard Chipset: VIA
Motherboard Bios: Latest
Video Card: Nvidia FX5200
Video Card Driver: 81.xx
Sound Card: Onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: Skystar2
1. TV Card Type: DVB
1. TV Card Driver: 4.3.0
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
Video Render Type: Renderless
Video Codec: Nvidia
Audio Codec: N/A
Satelite/CableTV Provider: Dishnetworks.
HTPC Case: Cooler master
Power Supply: 300W
Remote: RS 2117
TV: 20 inch SD tv
TV - HTPC Connection: S-video
Here is my test bed...
MP 2.0RC1 with 12/6/05 CVS.
Skystar 2 with 4.3.0 Drivers.
Here are the longs from when I start up the configuration wizard, click on TV then my card... hit auto tune... select my tpl file with 1 transponder in it. I then see that it changes all the information in the server4pc application. I get a signal strength and it comes back with nothing.
I have also loaded the SS2 patch that was displayed on the front page... this did nothing for what I am trying to do.
Here is my hardware and software setup on the dish. I have 2 LNB's hitting 110 and 119. I have a 4 port diseqc switch. 110 is on port 2 and 119 is on port 3. Under my DVB-s LNB I have:
LNB1(MHz) 11250
Switch (MHz) 0
LNB2(MHz) 11250
Diseqc: Level 1 B/S
LNBselect: 0 KHZ (tested 22 and 44)
LNB: KU-Band
My TPL file looks like this:
satname=Dish(110)
12224,V,20000
If anyone can test this out or needs me to test anything else out... I am totally up for the task.
Just to let everyone know... I can watch, record, pause and do everything else MY theatre has to offer.
LOG:
deleted by infinityloop
you must not post the text of the logfile!
use scoops test tool to export all logs an attach them to your post.
CPU Type: Athlon +2400
Memory: 1 GB
Motherboard: Biostar
Motherboard Chipset: VIA
Motherboard Bios: Latest
Video Card: Nvidia FX5200
Video Card Driver: 81.xx
Sound Card: Onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: Skystar2
1. TV Card Type: DVB
1. TV Card Driver: 4.3.0
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
Video Render Type: Renderless
Video Codec: Nvidia
Audio Codec: N/A
Satelite/CableTV Provider: Dishnetworks.
HTPC Case: Cooler master
Power Supply: 300W
Remote: RS 2117
TV: 20 inch SD tv
TV - HTPC Connection: S-video
Here is my test bed...
MP 2.0RC1 with 12/6/05 CVS.
Skystar 2 with 4.3.0 Drivers.
Here are the longs from when I start up the configuration wizard, click on TV then my card... hit auto tune... select my tpl file with 1 transponder in it. I then see that it changes all the information in the server4pc application. I get a signal strength and it comes back with nothing.
I have also loaded the SS2 patch that was displayed on the front page... this did nothing for what I am trying to do.
Here is my hardware and software setup on the dish. I have 2 LNB's hitting 110 and 119. I have a 4 port diseqc switch. 110 is on port 2 and 119 is on port 3. Under my DVB-s LNB I have:
LNB1(MHz) 11250
Switch (MHz) 0
LNB2(MHz) 11250
Diseqc: Level 1 B/S
LNBselect: 0 KHZ (tested 22 and 44)
LNB: KU-Band
My TPL file looks like this:
satname=Dish(110)
12224,V,20000
If anyone can test this out or needs me to test anything else out... I am totally up for the task.
Just to let everyone know... I can watch, record, pause and do everything else MY theatre has to offer.
LOG:
deleted by infinityloop
you must not post the text of the logfile!
use scoops test tool to export all logs an attach them to your post.
Austria