Reply to thread

Message

<blockquote data-quote="ColinT" data-source="post: 657558" data-attributes="member: 29886">What brand is it? Technomate TM4-S- How many input ports does it have? 4- If you know, what version of DiSEqC does it support (ie. 1.0, 1.1, 1.2, 1.x, 2.x)? 1.0 I think, certainly not 2.0- What ports are connected (ie. I need information like &quot;Port 1 = Astra 19.2&quot; or whatever...)? Port 1 unconnectedPort 2 (AB) 19.2 Astra 1Port 3 (BA) 13.0 HotbirdPort 4 (BB) 28.2 Astra 1- Do you use a CAM and are you trying to access encrypted channels? No- What is your signal strength and quality usually like? When using Hauppauge card, it is either ON or OFF so difficult to gauge, however I have never had any picture qualit problems with the Haupauge)(I too suspect quality, however when tuning as every other frequency was bad, I was not so sure, The ASTRA2 LNC is dual feed, and the secondary feed seemed OK)- I assume you are not trying to use a motor? No MotorI also need to know what kind of Blackgold card you are using:- What is the model number (eg. BGT3540)? BGT3595 (the new one)- What version of the drivers are you using? The July 2010 issue for that card (the first issue)- What operating system and service pack (ie. Windows XP SP3, Windows 7 64 bit) are you using? W7 64bit- What other cards are installed? Hauppauge Splus (Card 9) , which I disabled in MP when doingf these tests. The programmes shortly after midnight use this card.The system is my main system, and uses the BLACKGOLD card for DVBT (Card 2&amp;3), as I cant get the BG to switch, I continue to use the Hauppage normally for satellite. The BGT DVBS tuners are on Cards 4&amp;5, Tuner 4 is not connectedI will try to run extra tests tonight, but my time is limited.Thanks for the support<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite8" alt=":D" title="Big Grin&nbsp; &nbsp; :D" loading="lazy" data-shortname=":D" />ColinT</blockquote>

[QUOTE="ColinT, post: 657558, member: 29886"] What brand is it? Technomate TM4-S - How many input ports does it have? 4 - If you know, what version of DiSEqC does it support (ie. 1.0, 1.1, 1.2, 1.x, 2.x)? 1.0 I think, certainly not 2.0 - What ports are connected (ie. I need information like "Port 1 = Astra 19.2" or whatever...)? Port 1 unconnected Port 2 (AB) 19.2 Astra 1 Port 3 (BA) 13.0 Hotbird Port 4 (BB) 28.2 Astra 1 - Do you use a CAM and are you trying to access encrypted channels? No - What is your signal strength and quality usually like? When using Hauppauge card, it is either ON or OFF so difficult to gauge, however I have never had any picture qualit problems with the Haupauge) (I too suspect quality, however when tuning as every other frequency was bad, I was not so sure, The ASTRA2 LNC is dual feed, and the secondary feed seemed OK) - I assume you are not trying to use a motor? No Motor I also need to know what kind of Blackgold card you are using: - What is the model number (eg. BGT3540)? BGT3595 (the new one) - What version of the drivers are you using? The July 2010 issue for that card (the first issue) - What operating system and service pack (ie. Windows XP SP3, Windows 7 64 bit) are you using? W7 64bit - What other cards are installed? Hauppauge Splus (Card 9) , which I disabled in MP when doingf these tests. The programmes shortly after midnight use this card. The system is my main system, and uses the BLACKGOLD card for DVBT (Card 2&3), as I cant get the BG to switch, I continue to use the Hauppage normally for satellite. The BGT DVBS tuners are on Cards 4&5, Tuner 4 is not connected I will try to run extra tests tonight, but my time is limited. Thanks for the support:thx: ColinT [/QUOTE]

Verification