Reply to thread

Message

<blockquote data-quote="mm1352000" data-source="post: 657601" data-attributes="member: 82144">ColinGreat card - I really want one but I can't afford the upgrade! I've got 2 Pinnacle 7010ix cards which are similar to the 3540 model. Anyhow back on topic...Look, I'm very sorry for messing you around here but your issue got me checking my logs to make sure that everything was working perfectly. Although it looked good from the user interface, I discovered that I couldn't tune 2 channels in a row *on the same tuner* on DiSEqC ports other than port 1. In other words, I could do:1. start watching channel on port 12. switch to another channel on port 1OR1. start watching channel on port 22. switch to another channel on port 1But I couldn't do:1. start watching channel on port 12. switch to another channel on port 2OR1. start watching channel on port 22. switch to another channel on port 2(I have a 9x8 multiswitch, however it only requires switching between &quot;Simple A&quot; and &quot;Simple B&quot;)Just to be clear: the problem was with sending DiSEqC commands for port 2-4 when *changing to a different channel*. Everything should have worked okay if you stopped TV and started TV again on the channel that you wanted to view.I've just (10 minutes ago) been able to figure out what was going wrong and I've got another set of DLLs for you to try. I apologise once again for messing you round. As you can tell my fix is still in a very rough state![Edit: I've been following the BGT3595 thread over at AVForums. They mentioned there was a new driver available to fix the DVB-S2 issue on satellite tuner 2. You may want to check that out...][Edit: attachment removed. See <a href="https://forum.team-mediaportal.com/submit-code-patches-mediaportal-tv-server-etc-325/tv-server-hardware-specific-code-refactoring-87472/" target="_blank">this</a> thread for updates.]</blockquote>

[QUOTE="mm1352000, post: 657601, member: 82144"] Colin Great card - I really want one but I can't afford the upgrade! I've got 2 Pinnacle 7010ix cards which are similar to the 3540 model. Anyhow back on topic... Look, I'm very sorry for messing you around here but your issue got me checking my logs to make sure that everything was working perfectly. Although it looked good from the user interface, I discovered that I couldn't tune 2 channels in a row *on the same tuner* on DiSEqC ports other than port 1. In other words, I could do: 1. start watching channel on port 1 2. switch to another channel on port 1 OR 1. start watching channel on port 2 2. switch to another channel on port 1 But I couldn't do: 1. start watching channel on port 1 2. switch to another channel on port 2 OR 1. start watching channel on port 2 2. switch to another channel on port 2 (I have a 9x8 multiswitch, however it only requires switching between "Simple A" and "Simple B") Just to be clear: the problem was with sending DiSEqC commands for port 2-4 when *changing to a different channel*. Everything should have worked okay if you stopped TV and started TV again on the channel that you wanted to view. I've just (10 minutes ago) been able to figure out what was going wrong and I've got another set of DLLs for you to try. I apologise once again for messing you round. As you can tell my fix is still in a very rough state! [Edit: I've been following the BGT3595 thread over at AVForums. They mentioned there was a new driver available to fix the DVB-S2 issue on satellite tuner 2. You may want to check that out...] [Edit: attachment removed. See [URL="https://forum.team-mediaportal.com/submit-code-patches-mediaportal-tv-server-etc-325/tv-server-hardware-specific-code-refactoring-87472/"]this[/URL] thread for updates.] [/QUOTE]

Verification