Reply to thread

Message

<blockquote data-quote="bluebear" data-source="post: 822943" data-attributes="member: 82697">Edit: MM! Switched DiseqC to the same model (Triax) I have and switching is now working. Hi MM! Bad news I´m afraid. I´m having serious problems with my TBS6922 on a second setup, which were having the same TEVII issues like me. Heres what I have done. Installed newest driver from TBS. I used identical tvlibrary.dll and tswriter.ax provided in this thread as I have used with success in my setup.&nbsp; However in the second system It will not work. The diseqc is the only part not exactly the same as in my setup.With Dvbviewer I can change channels and switch with diseqC without problem in this setup. So it shouldn´t be that problem. I have made two logs for you, the first one is Scan_AA_AB. Initially I have already switched the diseqC to position AB with Dvbviewer. As you will see in the log, I can only scan the first transponder successfully, it then loses signal. Probably switching the diseqC back to position AA. The second one is a channel change between LNBs. The startup is the same as in the first test. DiseqC at AB with dvbviewer. I can change channel 2 times on the same LNB before the signal is lost. Probably back to AA as if i change to a channel on AAI have signal without any problems.I will Switch diseqC later this evening, to see if thats causing it. But it is strange when the switch are working with Dvbviewer. As always, just shout if you need something more from me. //B</blockquote>

[QUOTE="bluebear, post: 822943, member: 82697"] Edit: MM! Switched DiseqC to the same model (Triax) I have and switching is now working. Hi MM! Bad news I´m afraid. I´m having serious problems with my TBS6922 on a second setup, which were having the same TEVII issues like me. Heres what I have done. Installed newest driver from TBS. I used identical tvlibrary.dll and tswriter.ax provided in this thread as I have used with success in my setup. However in the second system It will not work. The diseqc is the only part not exactly the same as in my setup. With Dvbviewer I can change channels and switch with diseqC without problem in this setup. So it shouldn´t be that problem. I have made two logs for you, the first one is Scan_AA_AB. Initially I have already switched the diseqC to position AB with Dvbviewer. As you will see in the log, I can only scan the first transponder successfully, it then loses signal. Probably switching the diseqC back to position AA. The second one is a channel change between LNBs. The startup is the same as in the first test. DiseqC at AB with dvbviewer. I can change channel 2 times on the same LNB before the signal is lost. Probably back to AA as if i change to a channel on AA I have signal without any problems. I will Switch diseqC later this evening, to see if thats causing it. But it is strange when the switch are working with Dvbviewer. As always, just shout if you need something more from me. //B [/QUOTE]

Verification