Reply to thread

Message: <blockquote data-quote="alexirion" data-source="post: 701912" data-attributes="member: 101977">Re: AW: Re: TeVii S480 Dual DVB-S2 HDTV PCIe supported?Hi mm1352000!I tested with 1.1.2.45 again:Astra HD is only broadcasted at certain times. I already disabled Astra HD before from showing in the tv guide, because switching to it when it does not broadcast causes the Media Portal GUI to hang for about 30 seconds. Now, I also disabled Astra HD from EPG grabbing, by unchecking it in the TV Epg grabber section, but the behaviour didn't change.The on/off test crashed again after a few cycles, see tvserver_crash_at_1514_log.zip. It crashed around 15:14. Then I resetted the computer at 15:30.I then disabled the Power Scheduler, then suddenly the system crashed again at 15:42:16 (tvserver_crash_at_154216_log.zip). I did nothing special, just the TV-Server configuration dialog was open.After that, I succefully did three times a complete EPG grabbing (without powerscheduler and without going to hibernate and back). So, the problem while EPG grabbing, seems only to appear in conjunction with hibernating and resuming. Also, with watching tv and chanel zapping I didn't succeed in crashing the system.I want to say in addition, that the 1.1.2.45 driver is also an old one (from Juni 2010), but with all newer drivers, I get a crash by just watching tv and zapping a bit. With some versions it was getting even worser and with the later versions it was getting a bit better, but still no problem to crash it in five minutes. I also tested this with the original Mystique player, and did a roll back to a clean system, only with the player - the crashes were the same, when I use a driver > 1.1.0.28. I reported this to dvbshop and also to Digital Devices, but they were not able to help me - only the Mystique Dual S2 V1 was replaced before christmas with a V2, but everything is the same. Digital Devices was also saying something, that ATI graphics makes problems, so I removed the card and used the onboard Geforce 9300 - tv was also crashing. Maybe they were talking about the blocky artifacts, when DXVA is used with the Microsoft decoder, but that's absolutly not my point ...I also tested the "latest greatest" 2.0.0.23 driver again. I disabled EPG grabbing and did only try zapping. As long as only one tuner is used (checked with tuner A and B) everything was working. But as soon as I start a recording and use the second tuner to switch channels, then it crashes soon after only a few channel switches. It did not crash, when both tuners are used and when I did not zap around (record one channel and watch another channel on the second tuner). I was trying to record a movie with the 2.0.23 and did not use the second tuner, but it was also crashing after 12 minutes of recording.The delay of 90 seconds was not helping. Normally the Mystique does not need any delay and I'm also not sure if the restart option is good for the Mystique. For the Tevii they were really needed. These days the tuners were once not working - it was without the Restart option checked and without Delay, so I'm now testing if it's also better for the Mystique to give a delay of 5 seconds.Another question. With this Mystique issue I'm totally off-topic to this thread belonging to the Tevii S480 - so it would be better to move to another one, maybe: "Mystique Satix S2 Dual - BSOD with all drivers greater 1.1.028". Is it possible to move the last posts there?Kind regards,--Alex</blockquote>

Verification