Trying to get AverTV purity 3d MCE 250 recognized (1 Viewer)

[fasteddie]

Area: Media Portal Program
MediaPortal Version: 0.2.1.0 (2006-10-21)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPA Decoder Filter
Video Codec: MPV Decoder Filter
CPU Type: AMD Athlon XP 3200+
Memory: 511 MB
Motherboard: NF7-S/NF7,NF7-V (nVidia-nForce2)
TV Card Model: AveTV Purity 3D MCE 250
TV Card Type: Hardware
TV Card Driver: v1.0.1.19
Video Card Model: Radeon 9600 Series (128 MB)
Video Card Driver: -
Video Card Resolution: 1024x768
Video Render Type: VMR9
Audio Card Model: NVIDIA(R) nForce(TM) Audio
Audio Card Driver: -
Synopsis::

I can't get configure to recognize my card. I have the AverTV Purity 3D MCE 250. I found an entry for it in capturecarddefinitions.xml (see below). i read in other post about editing it but I have no clue how to do this or if it's even necassary.

I saw the link below to add the card to the supported list but the instructions are for DVB cards which have BDA drivers, and I don't know if I should do the same for my card or not.

Adding a card to the natively supported list

I am total newb to this so any help would be apreciated.



<capturecard commercialname="AverTV Purity-3D Dual MCE 250" capturename="AVerMedia Hardware MPEG Capture (61153)" devid="ven_1033&amp;dev_013a&amp;subsys_a211ffff">
<capabilities tv="true" radio="false" mpeg2="true" mce="true" sw="false" bda="false"/>
<tv>
<interface cat="encoder" video="" audio="" mpeg2="0"/>
<filters>
<filter cat="tvtuner" name="AVerMedia Hardware MPEG TvTuner" checkdevice="true"/>
<filter cat="tvaudio" name="AVerMedia Hardware MPEG TvAudio" checkdevice="true"/>
<filter cat="crossbar" name="AVerMedia Hardware MPEG Crossbar" checkdevice="true"/>
<filter cat="capture" name="AVerMedia Hardware MPEG Capture (61153)" checkdevice="true"/>
<filter cat="encoder" name="AVerMedia Hardware MPEG Encoder (61153)" checkdevice="true"/>
</filters>
<connections>
<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="%tvtuner%"/>
<connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"/>
<connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="%audiotuner%"/>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
<connection sourcefilter="crossbar" sourcepin="1" sinkfilter="capture" sinkpin="1"/>
<connection sourcefilter="capture" sourcepin="1" sinkfilter="encoder" sinkpin="0"/>
<connection sourcefilter="capture" sourcepin="2" sinkfilter="encoder" sinkpin="1"/>
</connections>
</tv>
</capturecard>

 

[fasteddie]

OK, I got edited the capturecarddefinitions.xml file so now MP sees my card but now get the message "unable to create graph fo this device"

Here is the configuration log:

11/1/2006 3:48:24 PM 437 [Info.] Load settings done
11/1/2006 3:48:33 PM 468 [Info.] device:AVerMedia Hardware MPEG Capture (61153) iddevicenp:\\?\pci#ven_1033&dev_013a&subsys_a2111461&rev_0b#4&3b1d9ab8&0&5040#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\capture
11/1/2006 3:48:33 PM 468 [Info.] Adding name:AverTV Purity-3D Dual MCE 250 id:ven_1033&dev_013a&subsys_a2111461 type:Analog
11/1/2006 3:48:33 PM 468 [Info.] TVCapture.CreateGraph() Card:1
11/1/2006 3:48:33 PM 484 [Info.] vmr9:ctor()
11/1/2006 3:48:33 PM 484 [Info.] vmr9:ctor() DX9Device=null
11/1/2006 3:48:33 PM 484 [Info.] vmr9:ctor() _renderFrame=null
11/1/2006 3:48:33 PM 484 [Info.] vmr9:ctor() done:False
11/1/2006 3:48:33 PM 484 [Info.] SinkGraphEx:CreateGraph() IN
11/1/2006 3:48:33 PM 500 [Info.] key SYSTEM\CurrentControlSet\Enum\PCI\ven_1033&dev_013a&subsys_a2111461&rev_0b\4&3b1d9ab8&0&5040
11/1/2006 3:48:33 PM 500 [Info.] LoadDefs for device at PCI bus 1, device 10
11/1/2006 3:48:33 PM 500 [Info.] key SYSTEM\CurrentControlSet\Enum\PCI\ven_1033&dev_013a&subsys_a2111461&rev_0b\4&3b1d9ab8&0&5040
11/1/2006 3:48:33 PM 500 [Info.] defs loaded for device at PCI bus 1, device 10
11/1/2006 3:48:33 PM 500 [Info.] CaptureCard AVerMedia Hardware MPEG Capture (61153) NOT supported, no definitions found
11/1/2006 3:48:33 PM 500 [ERROR] CaptureCard AVerMedia Hardware MPEG Capture (61153) NOT supported, no definitions found
11/1/2006 3:48:33 PM 500 [Info.] SinkGraphEx:card does not contain filters?
11/1/2006 3:48:33 PM 500 [ERROR] SinkGraphEx:card does not contain filters?
11/1/2006 3:48:33 PM 515 [Info.] TVCapture.DeleteGraph() Card:1
11/1/2006 3:48:35 PM 406 [Info.] TVCapture.CreateGraph() Card:1
11/1/2006 3:48:35 PM 406 [Info.] vmr9:ctor()
11/1/2006 3:48:35 PM 406 [Info.] vmr9:ctor() DX9Device=null
11/1/2006 3:48:35 PM 406 [Info.] vmr9:ctor() _renderFrame=null
11/1/2006 3:48:35 PM 406 [Info.] vmr9:ctor() done:False
11/1/2006 3:48:35 PM 406 [Info.] SinkGraphEx:CreateGraph() IN
11/1/2006 3:48:35 PM 406 [Info.] SinkGraphEx:card does not contain filters?
11/1/2006 3:48:35 PM 406 [ERROR] SinkGraphEx:card does not contain filters?
11/1/2006 3:48:35 PM 406 [Info.] TVCapture.DeleteGraph() Card:1
11/1/2006 3:48:37 PM 734 [Info.] dbs:close:RadioDatabase4.db3
11/1/2006 3:48:37 PM 734 [Info.] dbs:close:TVDatabaseV21.db3
11/1/2006 3:48:37 PM 750 [Info.] dbs:close:MusicDatabaseV7.db3


Any help?