TV card detected but no channels found (1 Viewer)

[sand]

Hello,

I have two TV card installed on my server - old kworld analog BT878 and MSI megasky 580 DVB-T card.

After modifying dvbt.xml for my country digital channels are found - everything OK.

But when try to search channels on my old kworld after scanning none of the channels are found (I don't know if it's important but on channel searching screen there is info "TV tuner locked: NO").

I also use DScaler and tried iuvcr for scheduled recording without problem.

Any help or info appreciated.

sand

 

[Sicox]

Hi Sand,

Yes i have the same problem. My card is detected but no channels scan.

I am using TV EngineV3 (with latest SVN's) and used my PlayTV Pro 2 - Bt878 analog Tv Card.

 

[gerhardo]

Same here
Pinnacle PCTV Pro - Brooktree 878 based
Pinnacle drivers
tvengine3-01-20-2007--01-12h--Rev12679.zip
MediaPortal-svn--01-20-2007--01-01-Rev12679.exe
Works in 0.2
Intervideo encoder installed
Tuner cannot lock
(I _believe_ I followed the setup guide and videos)
Note that the card (as many 878 cards) does not digitize audio, done by the sound card via line-in.

When scanning (or trying to preview manually added channels), the following is repeatedly printed to the logs:

error.log
2007-01-21 00:15:29 Exception ystem.Exception: No analog audio/video pins found
at TvLibrary.Implementations.Analog.TvCardAnalogBase.BuildGraph()
2007-01-21 00:15:29 Exception :No analog audio/video pins found
2007-01-21 00:15:29 site :Void BuildGraph()
2007-01-21 00:15:29 source :TVLibrary
2007-01-21 00:15:29 stacktrace: at TvLibrary.Implementations.Analog.TvCardAnalogBase.BuildGraph()
2007-01-21 00:15:29 Exception ystem.Exception: No analog audio/video pins found
at TvLibrary.Implementations.Analog.TvCardAnalogBase.BuildGraph()
at TvLibrary.Implementations.Analog.TvCardAnalog.Tune(IChannel channel)
at TvService.TvCard.Tune(IChannel channel, Int32 idChannel)

tv.log
2007-01-21 00:15:24 Controller:Tune 1 to
2007-01-21 00:15:24 analog: Tune:tv: Freq:0 Channel:4 Country:The Netherlands Tuner:Cable Video:Tuner
2007-01-21 00:15:24 analog: build graph
2007-01-21 00:15:24 analog: AddTvTunerFilter Pinnacle WDM PCTV Analog Tuner
2007-01-21 00:15:24 analog: AddCrossBarFilter
2007-01-21 00:15:24 analog: AddCrossBarFilter tryinnacle WDM PCTV Crossbar
2007-01-21 00:15:24 analog: FindCrossBarPin type:Video_Tuner direction:Input
2007-01-21 00:15:24 analog: FindCrossBarPin inputs:5 outputs:2
2007-01-21 00:15:24 analog: pin 0 type:Video_SVideo
2007-01-21 00:15:24 analog: pin 1 type:Video_Tuner
2007-01-21 00:15:24 analog: FindCrossBarPin found pin at index:1
2007-01-21 00:15:24 analog: ConnectFilter()
2007-01-21 00:15:24 analog: PinDest:name:1: Video Tuner In Direction:Input
2007-01-21 00:15:24 analog: pinSource 0:name:Analog Video Direction:Output
2007-01-21 00:15:24 analog: pins connected
2007-01-21 00:15:24 analog: AddCrossBarFilter succeeded
2007-01-21 00:15:24 analog: AddTvAudioFilter
2007-01-21 00:15:24 analog: FindCrossBarPin type:Audio_Tuner direction:Input
2007-01-21 00:15:24 analog: FindCrossBarPin inputs:5 outputs:2
2007-01-21 00:15:24 analog: pin 0 type:Video_SVideo
2007-01-21 00:15:24 analog: pin 1 type:Video_Tuner
2007-01-21 00:15:24 analog: pin 2 type:Video_Composite
2007-01-21 00:15:24 analog: pin 3 type:Audio_Tuner
2007-01-21 00:15:24 analog: FindCrossBarPin found pin at index:3
2007-01-21 00:15:24 analog: AddTvAudioFilter tryinnacle WDM PCTV TvAudio
2007-01-21 00:15:24 analog: ConnectFilter()
2007-01-21 00:15:24 analog: PinDest:name:TVAudio In Direction:Input
2007-01-21 00:15:24 analog: pinSource 0:name:TVAudio In Direction:Input
2007-01-21 00:15:29 analog: pinSource 1:name:TVAudio In Direction:Input
2007-01-21 00:15:29 analog: pins connected
2007-01-21 00:15:29 analog: AddTvAudioFilter succeededinnacle WDM PCTV TvAudio
2007-01-21 00:15:29 analog: AddTvCaptureFilter
2007-01-21 00:15:29 analog: AddTvCaptureFilter tryinnacle WDM PCTV Video Capture
2007-01-21 00:15:29 analog: AddTvCaptureFilter succeeded:0x80004005
2007-01-21 00:15:29 analog: FindCapturePin on capture filter
2007-01-21 00:15:29 analog: AddTvEncoderFilter
2007-01-21 00:15:29 analog: AddTvEncoderFilter no encoder devices found
2007-01-21 00:15:29 analog: AddTvEncoderFilter
2007-01-21 00:15:29 analog: AddTvEncoderFilter no encoder devices found
2007-01-21 00:15:29 analog: FindCapturePin on capture filter
2007-01-21 00:15:29 analog: FindCapturePin on capture filter
2007-01-21 00:15:29 analog: AddTvMultiPlexer
2007-01-21 00:15:29 analog: AddTvMultiPlexer no multiplexer devices found
2007-01-21 00:15:29 analog: AddTvMultiPlexer
2007-01-21 00:15:29 analog: AddTvMultiPlexer no multiplexer devices found
2007-01-21 00:15:29 analog: FindCapturePin on capture filter
2007-01-21 00:15:29 analog: FindCapturePin on capture filter
2007-01-21 00:15:29 analog: FindAudioVideoPins
2007-01-21 00:15:29 analog: find pins on capture filter
2007-01-21 00:15:29 analog: FindMediaPin pin:#0 name:Capture Direction:Output
2007-01-21 00:15:29 analog: FindMediaPin major:73646976-0000-0010-8000-00aa00389b71 sub:32315659-0000-0010-8000-00aa00389b71
2007-01-21 00:15:29 analog: FindMediaPin succeeded
2007-01-21 00:15:29 analog: failed to find audio/video pins
2007-01-21 00:15:29 analogispose()

 

[Shaftstick]

I Have The same prblem with PCTV PRO.and TVengine 3+svn
can anybody help or give us instruction to solve the problem

this is my log


TvLibrary.Implementations.Analog.TvCardAnalogBase. BuildGraph()
at TvLibrary.Implementations.Analog.TvCardAnalog.Tune (Int32 subChannelId, IChannel channel)
at TvService.TvCard.Tune(User& user, IChannel channel, Int32 idChannel)
13/02/2007 02:04:57 analog: unable to add TvCaptureFilter to graph
13/02/2007 02:04:57 Exception :TvLibrary.TvException: Unable to add TvCaptureFilter to graph
at TvLibrary.Implementations.Analog.TvCardAnalogBase. AddTvCaptureFilter()
at TvLibrary.Implementations.Analog.TvCardAnalogBase. BuildGraph()
13/02/2007 02:04:57 Exception :Unable to add TvCaptureFilter to graph
13/02/2007 02:04:57 site :Void AddTvCaptureFilter()
13/02/2007 02:04:57 source :TVLibrary
13/02/2007 02:04:57 stacktrace: at TvLibrary.Implementations.Analog.TvCardAnalogBase. AddTvCaptureFilter()
at TvLibrary.Implementations.Analog.TvCardAnalogBase. BuildGraph()
13/02/2007 02:04:57 Exception :TvLibrary.TvException: Unable to add TvCaptureFilter to graph
at TvLibrary.Implementations.Analog.TvCardAnalogBase. BuildGraph()
at TvLibrary.Implementations.Analog.TvCardAnalog.Tune (Int32 subChannelId, IChannel channel)
at TvService.TvCard.Tune(User& user, IChannel channel, Int32 idChannel)
13/02/2007 02:04:57 Exception :Unable to add TvCaptureFilter to graph
13/02/2007 02:04:57 site :Void AddTvCaptureFilter()
13/02/2007 02:04:57 source :TVLibrary
13/02/2007 02:04:57 stacktrace: at TvLibrary.Implementations.Analog.TvCardAnalogBase. BuildGraph()
at TvLibrary.Implementations.Analog.TvCardAnalog.Tune (Int32 subChannelId, IChannel channel)
at TvService.TvCard.Tune(User& user, IChannel channel, Int32 idChannel)

 

[pbb]

Same problem for me, on a PowerColor Theater 550 PRO. I see a lot of people are having the same problem on analog cards.

Anybody with a solution?

 

[kimsy]

Same here, i'm using two ati 550 pro

 

[mclog]

I had that problem briefly, I use XP MCE 2005, I first of all disabled all MCE services, and restarted the machine. Then it worked.

 

[gerhardo]

Analog SW cards will likely always have problems, they are a pain.
I have not solved my problems, some extensive information from another user in this thread:
https://forum.team-mediaportal.com/showthread.php?t=15772

 

[pbb]

The Theater 550 PRO series cards are hardware encoders, not software. I am not sure about the other cards in the start of this thread.

 

[pbb]

Any updates? This seems to be a problem several people are having, with various analog cards...