Hi guys, i continue my efforts into getting the TV Server options working correctly.
If i scan for Channels in the TV Server for my location (Australia) the scan takes 0.1 second, only to tell me no new channels found.
The analogue scan fails just as badly, however it actually seems to try and scan something, as it takes 30 seconds to complete
In the legacy Media Portal Setup, i can scan for channels, they are detected as normal.
But the new TV Server Setup, despite seeing my cards doesn't seem to do anything with them.
Here is the Error Log when i scan for channels from TV Server setup.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
.5/30/2007 9:33:29 AM C Exception ystem.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
at TvLibrary.Streaming.RtspStreaming.StreamSetup(String ipAdress)
at TvLibrary.Streaming.RtspStreaming..ctor(String hostName)
5/30/2007 9:33:29 AM C Exception :An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
5/30/2007 9:33:29 AM C site :Void StreamSetup(System.String)
5/30/2007 9:33:29 AM C source :TVLibrary
5/30/2007 9:33:29 AM C stacktrace: at TvLibrary.Streaming.RtspStreaming.StreamSetup(String ipAdress)
at TvLibrary.Streaming.RtspStreaming..ctor(String hostName)
5/30/2007 9:33:30 AM C Exception ystem.Runtime.InteropServices.COMException (0x80040154): Retrieving the COM class factory for component with CLSID {FC50BED6-FE38-42D3-B831-771690091A6E} failed due to the following error: 80040154.
at TvLibrary.Implementations.DVB.TvCardDvbBase.AddTsWriterFilterToGraph()
at TvLibrary.Implementations.DVB.TvCardDvbBase.AddAndConnectBDABoardFilters(DsDevice device)
at TvLibrary.Implementations.DVB.TvCardDVBT.BuildGraph()
5/30/2007 9:33:30 AM C Exception :Retrieving the COM class factory for component with CLSID {FC50BED6-FE38-42D3-B831-771690091A6E} failed due to the following error: 80040154.
5/30/2007 9:33:30 AM C site :Void AddTsWriterFilterToGraph()
5/30/2007 9:33:30 AM C source :TVLibrary
5/30/2007 9:33:30 AM C stacktrace: at TvLibrary.Implementations.DVB.TvCardDvbBase.AddTsWriterFilterToGraph()
at TvLibrary.Implementations.DVB.TvCardDvbBase.AddAndConnectBDABoardFilters(DsDevice device)
at TvLibrary.Implementations.DVB.TvCardDVBT.BuildGraph()
5/30/2007 9:33:30 AM C Exception ystem.Runtime.InteropServices.COMException (0x80040154): Retrieving the COM class factory for component with CLSID {FC50BED6-FE38-42D3-B831-771690091A6E} failed due to the following error: 80040154.
at TvLibrary.Implementations.DVB.TvCardDVBT.BuildGraph()
at TvLibrary.Implementations.DVB.TvCardDVBT.Tune(Int32 subChannelId, IChannel channel)
5/30/2007 9:33:30 AM C Exception :Retrieving the COM class factory for component with CLSID {FC50BED6-FE38-42D3-B831-771690091A6E} failed due to the following error:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If i delete the TV card from the Media Portal Setup (Config Panel) as suggested in the Video for TVServer, I recieve a message when Media Portal is opened:
------------------------------
My Radio
All Tuners are busy.
----------------------------
(Which is bizzare, because in the TV Server setup, i get a message that this device does not support radio, when i scan for channels)
The Devices are detected as
1 DVB-T BDA 7162 - BDA DVBT Tuner0
2 DVB-T BDA 7162 - BDA DVBT Tuner1
3 Analogue BDA 7162 - BDA Analog TV Tuner0
4 Analogue BDA 7162 - BDA Analog TV Tuner1
But it seems they don't find any channels, or work in TV Server.
If i then go to My TV i recieve the message (No Tuner Cards Installed),. (Obviosuly because i deleted them from the MP setup as instructed)
And this would seem to be using the legacy Tuner MP engine. (Not TV server)
As I also don't have the TV Streaming Option that is mentioned in the Video
which is meant to be under TV when using TV server..
Any ideas what all this means, as i'm stumped...??
Any help or advice would be appreciated..
If i scan for Channels in the TV Server for my location (Australia) the scan takes 0.1 second, only to tell me no new channels found.
The analogue scan fails just as badly, however it actually seems to try and scan something, as it takes 30 seconds to complete
In the legacy Media Portal Setup, i can scan for channels, they are detected as normal.
But the new TV Server Setup, despite seeing my cards doesn't seem to do anything with them.
Here is the Error Log when i scan for channels from TV Server setup.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
.5/30/2007 9:33:29 AM C Exception ystem.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
at TvLibrary.Streaming.RtspStreaming.StreamSetup(String ipAdress)
at TvLibrary.Streaming.RtspStreaming..ctor(String hostName)
5/30/2007 9:33:29 AM C Exception :An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
5/30/2007 9:33:29 AM C site :Void StreamSetup(System.String)
5/30/2007 9:33:29 AM C source :TVLibrary
5/30/2007 9:33:29 AM C stacktrace: at TvLibrary.Streaming.RtspStreaming.StreamSetup(String ipAdress)
at TvLibrary.Streaming.RtspStreaming..ctor(String hostName)
5/30/2007 9:33:30 AM C Exception ystem.Runtime.InteropServices.COMException (0x80040154): Retrieving the COM class factory for component with CLSID {FC50BED6-FE38-42D3-B831-771690091A6E} failed due to the following error: 80040154.
at TvLibrary.Implementations.DVB.TvCardDvbBase.AddTsWriterFilterToGraph()
at TvLibrary.Implementations.DVB.TvCardDvbBase.AddAndConnectBDABoardFilters(DsDevice device)
at TvLibrary.Implementations.DVB.TvCardDVBT.BuildGraph()
5/30/2007 9:33:30 AM C Exception :Retrieving the COM class factory for component with CLSID {FC50BED6-FE38-42D3-B831-771690091A6E} failed due to the following error: 80040154.
5/30/2007 9:33:30 AM C site :Void AddTsWriterFilterToGraph()
5/30/2007 9:33:30 AM C source :TVLibrary
5/30/2007 9:33:30 AM C stacktrace: at TvLibrary.Implementations.DVB.TvCardDvbBase.AddTsWriterFilterToGraph()
at TvLibrary.Implementations.DVB.TvCardDvbBase.AddAndConnectBDABoardFilters(DsDevice device)
at TvLibrary.Implementations.DVB.TvCardDVBT.BuildGraph()
5/30/2007 9:33:30 AM C Exception ystem.Runtime.InteropServices.COMException (0x80040154): Retrieving the COM class factory for component with CLSID {FC50BED6-FE38-42D3-B831-771690091A6E} failed due to the following error: 80040154.
at TvLibrary.Implementations.DVB.TvCardDVBT.BuildGraph()
at TvLibrary.Implementations.DVB.TvCardDVBT.Tune(Int32 subChannelId, IChannel channel)
5/30/2007 9:33:30 AM C Exception :Retrieving the COM class factory for component with CLSID {FC50BED6-FE38-42D3-B831-771690091A6E} failed due to the following error:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If i delete the TV card from the Media Portal Setup (Config Panel) as suggested in the Video for TVServer, I recieve a message when Media Portal is opened:
------------------------------
My Radio
All Tuners are busy.
----------------------------
(Which is bizzare, because in the TV Server setup, i get a message that this device does not support radio, when i scan for channels)
The Devices are detected as
1 DVB-T BDA 7162 - BDA DVBT Tuner0
2 DVB-T BDA 7162 - BDA DVBT Tuner1
3 Analogue BDA 7162 - BDA Analog TV Tuner0
4 Analogue BDA 7162 - BDA Analog TV Tuner1
But it seems they don't find any channels, or work in TV Server.
If i then go to My TV i recieve the message (No Tuner Cards Installed),. (Obviosuly because i deleted them from the MP setup as instructed)
And this would seem to be using the legacy Tuner MP engine. (Not TV server)
As I also don't have the TV Streaming Option that is mentioned in the Video
which is meant to be under TV when using TV server..
Any ideas what all this means, as i'm stumped...??
Any help or advice would be appreciated..