TV-Server Version:
MediaPortal Version: 1.0.0
MediaPortal Skin: Blue3wide
Windows Version: XP Pro SP3
CPU Type: Intel Pentium D 2.8GHz
HDD: WD 1.0TB
Memory: 2.5Gb (DDR2 533MHz)
Motherboard: Dell SC430
Video Card: nVidia GeForce 6600
Video Card Driver: 6.14.11.8206
Sound Card: Creative SB Audigy
Sound Card AC3: coaxial out
Sound Card Driver: 5.12.1.514 Microsoft
1. TV Card: Conexant BDA
1. TV Card Type: DVB-T
1. TV Card Driver: 4.0.107.0
MPEG2 Video Codec: Intervideo Video Decoder
MPEG2 Audio Codec: Intervideo Audio Decoder
h.264 Video Codec: Cyberlink H.264/AVC Decoder (PDVD7.x)
Satelite/CableTV Provider:
HTPC Case: Dell Std
Cooling: Dell std
Power Supply: Dell std
Remote:
TV: Sanyo PLV-Z5 projector
TV - HTPC Connection: HDMI
Steps to reproduce:
1. Initial setup of channels, etc - everything works OK
2. some time later, delete all TV and Radio Channels
3. Autosearch using "Australia - All Regions"
- some frequencies find new channels
- some frequencies come back with "nothing found"
- some frequencies display no text and are overwritten by the next frequency
- end result is that all channels are successfully setup except for ABC
see the frequency details
4. Close TV-Server Configuration & Load MP
5. select My TV
6. go through all channels
All channels seem to work OK... (although previously I had problems with freezing, and loss of sound, until I turn the TV off and back on again inside My TV.
Logfiles here.
Mike.
MediaPortal Version: 1.0.0
MediaPortal Skin: Blue3wide
Windows Version: XP Pro SP3
CPU Type: Intel Pentium D 2.8GHz
HDD: WD 1.0TB
Memory: 2.5Gb (DDR2 533MHz)
Motherboard: Dell SC430
Video Card: nVidia GeForce 6600
Video Card Driver: 6.14.11.8206
Sound Card: Creative SB Audigy
Sound Card AC3: coaxial out
Sound Card Driver: 5.12.1.514 Microsoft
1. TV Card: Conexant BDA
1. TV Card Type: DVB-T
1. TV Card Driver: 4.0.107.0
MPEG2 Video Codec: Intervideo Video Decoder
MPEG2 Audio Codec: Intervideo Audio Decoder
h.264 Video Codec: Cyberlink H.264/AVC Decoder (PDVD7.x)
Satelite/CableTV Provider:
HTPC Case: Dell Std
Cooling: Dell std
Power Supply: Dell std
Remote:
TV: Sanyo PLV-Z5 projector
TV - HTPC Connection: HDMI
Steps to reproduce:
1. Initial setup of channels, etc - everything works OK
2. some time later, delete all TV and Radio Channels
3. Autosearch using "Australia - All Regions"
- some frequencies find new channels
- some frequencies come back with "nothing found"
- some frequencies display no text and are overwritten by the next frequency
- end result is that all channels are successfully setup except for ABC
see the frequency details
4. Close TV-Server Configuration & Load MP
5. select My TV
6. go through all channels
All channels seem to work OK... (although previously I had problems with freezing, and loss of sound, until I turn the TV off and back on again inside My TV.
Logfiles here.
Mike.