Canada
MediaPortal Version: MP RC1.10
MediaPortal Skin: StreamedMP
Windows Version: WinXP Pro w/SP3
CPU Type: AMD Athlon X2 4800+
HDD: Western Digital 640Gig
Memory: Kingston 2Gig
Motherboard: ASUS M2N-X
Video Card: ASUS EAH4350
Video Card Driver: CCC 9.10
Sound Card: CL 5.1 Live
Sound Card AC3: Analog 5.1
Sound Card Driver: KX Drivers
1. TV Card: Hauppauge 1250
1. TV Card Type: ATSC
1. TV Card Driver:
2. TV Card: Twinhan 1020A
2. TV Card Type: DVB-S
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Multiple types depending on source
MPEG2 Audio Codec: Multiple types
h.264 Video Codec: MPC internal decoder
Satelite/CableTV Provider: None - using OTA
HTPC Case: Industrial
Cooling: Zalman CNPS8000
Power Supply: OCZ StealthXtreme 500W
Remote: Panny TV Remote
TV: Panny PT-47X54
TV - HTPC Connection: DVI --> HDMI
I've set up the server the first time, and did a scan of my cards, found all my channels. I've watched TV in MP fine. I did some codec changes, re-installed SAF 4.0, did a reboot, now the TV Server won't connect to the tuner cards. When I try and watch a channel, it indicates that the channel is not mapped to a tuner.
In the TV Server configuration, Under the TV Server tab, my server is listed (my HTPC), but the tuners aren't listed under that, but they are still listed under where you can set the card priorities, and they are not crossed out.
How do I get the TV Server to re-connect to the cards again? I've tried a reboot, and all sorts of things within the TV Server configuration, but I can't seem to get them setup again. Don't tell me that I will have to re-install the server again...please.
MediaPortal Skin: StreamedMP
Windows Version: WinXP Pro w/SP3
CPU Type: AMD Athlon X2 4800+
HDD: Western Digital 640Gig
Memory: Kingston 2Gig
Motherboard: ASUS M2N-X
Video Card: ASUS EAH4350
Video Card Driver: CCC 9.10
Sound Card: CL 5.1 Live
Sound Card AC3: Analog 5.1
Sound Card Driver: KX Drivers
1. TV Card: Hauppauge 1250
1. TV Card Type: ATSC
1. TV Card Driver:
2. TV Card: Twinhan 1020A
2. TV Card Type: DVB-S
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Multiple types depending on source
MPEG2 Audio Codec: Multiple types
h.264 Video Codec: MPC internal decoder
Satelite/CableTV Provider: None - using OTA
HTPC Case: Industrial
Cooling: Zalman CNPS8000
Power Supply: OCZ StealthXtreme 500W
Remote: Panny TV Remote
TV: Panny PT-47X54
TV - HTPC Connection: DVI --> HDMI
I've set up the server the first time, and did a scan of my cards, found all my channels. I've watched TV in MP fine. I did some codec changes, re-installed SAF 4.0, did a reboot, now the TV Server won't connect to the tuner cards. When I try and watch a channel, it indicates that the channel is not mapped to a tuner.
In the TV Server configuration, Under the TV Server tab, my server is listed (my HTPC), but the tuners aren't listed under that, but they are still listed under where you can set the card priorities, and they are not crossed out.
How do I get the TV Server to re-connect to the cards again? I've tried a reboot, and all sorts of things within the TV Server configuration, but I can't seem to get them setup again. Don't tell me that I will have to re-install the server again...please.
I didn't think about that, but I will give it a whirl when I get home from work. Curious as to how that works. Does it only try the once, timeout, then never try again?