Hi ,
I've searched the forum but not realy found a solution.
The card is listed in TVE3 but when i scan there is no signal detected. Below is a piece of tv.log. It's the same for every transponder.
Needless to mention that it runs in dvbviewer.
Any help much appreciated!
card: Tuner locked:False signal strength:0 signal quality:0
2008-02-01 17:10:33.671875 [10]: dvbs: TuneVBS:tv: Freq:10788000 ONID:-1 TSID:-1 SID:-1 PMT:FFFFFFFF FTA:False LCN:10000 SymbolRate:22000 Modulation:ModNotSet Polarisation:LinearV InnerFecRate:Rate5_6 DisEqc:None band:Universal Pilot:NotSet RollOff:NotSet
2008-02-01 17:10:33.671875 [10]: LNB low:9750 hi:10600 switch:11700
2008-02-01 17:10:33.671875 [10]: Trying to set DVB-S2 modulation...
2008-02-01 17:10:33.671875 [10]: Technotrend DVB-S2 modulation set to:ModNotSet
2008-02-01 17:10:33.671875 [10]: Technotrend DVB-S2 Pilot set to:NotSet
2008-02-01 17:10:33.671875 [10]: Technotrend DVB-S2 RollOff set to:NotSet
2008-02-01 17:10:33.671875 [10]: Technotrend DVB-S2 fec set to:Rate5_6
2008-02-01 17:10:33.671875 [10]: Channel modulation is set to ModNotSet
2008-02-01 17:10:33.671875 [10]: Channel FECRate is set to Rate5_6
2008-02-01 17:10:33.671875 [10]: Technotrend: already tuned to diseqc:None, frequency:10788000, polarisation:LinearV
2008-02-01 17:10:33.781250 [10]: dvbubmiting tunerequest Channel: subChannel:0
2008-02-01 17:10:33.781250 [10]: dvbubmit tunerequest size:1 new:0
2008-02-01 17:10:33.781250 [10]: subch:0 OnBeforeTune
2008-02-01 17:10:33.781250 [10]: subch:0 OnAfterTune
2008-02-01 17:10:33.781250 [10]: subch:0 OnGraphStart
2008-02-01 17:10:33.781250 [10]: subch:0 RunGraph: already running
2008-02-01 17:10:33.781250 [10]: subch:0 SetupPmtGrabberid FFFFFFFF sid:FFFFFFFF
2008-02-01 17:10:35.781250 [10]: Scan: tuner locked:False signal:0 quality:0
2008-02-01 17:10:35.781250 [10]: Scan: no signal detected
I've searched the forum but not realy found a solution.
The card is listed in TVE3 but when i scan there is no signal detected. Below is a piece of tv.log. It's the same for every transponder.
Needless to mention that it runs in dvbviewer.
Any help much appreciated!
card: Tuner locked:False signal strength:0 signal quality:0
2008-02-01 17:10:33.671875 [10]: dvbs: TuneVBS:tv: Freq:10788000 ONID:-1 TSID:-1 SID:-1 PMT:FFFFFFFF FTA:False LCN:10000 SymbolRate:22000 Modulation:ModNotSet Polarisation:LinearV InnerFecRate:Rate5_6 DisEqc:None band:Universal Pilot:NotSet RollOff:NotSet
2008-02-01 17:10:33.671875 [10]: LNB low:9750 hi:10600 switch:11700
2008-02-01 17:10:33.671875 [10]: Trying to set DVB-S2 modulation...
2008-02-01 17:10:33.671875 [10]: Technotrend DVB-S2 modulation set to:ModNotSet
2008-02-01 17:10:33.671875 [10]: Technotrend DVB-S2 Pilot set to:NotSet
2008-02-01 17:10:33.671875 [10]: Technotrend DVB-S2 RollOff set to:NotSet
2008-02-01 17:10:33.671875 [10]: Technotrend DVB-S2 fec set to:Rate5_6
2008-02-01 17:10:33.671875 [10]: Channel modulation is set to ModNotSet
2008-02-01 17:10:33.671875 [10]: Channel FECRate is set to Rate5_6
2008-02-01 17:10:33.671875 [10]: Technotrend: already tuned to diseqc:None, frequency:10788000, polarisation:LinearV
2008-02-01 17:10:33.781250 [10]: dvbubmiting tunerequest Channel: subChannel:0
2008-02-01 17:10:33.781250 [10]: dvbubmit tunerequest size:1 new:0
2008-02-01 17:10:33.781250 [10]: subch:0 OnBeforeTune
2008-02-01 17:10:33.781250 [10]: subch:0 OnAfterTune
2008-02-01 17:10:33.781250 [10]: subch:0 OnGraphStart
2008-02-01 17:10:33.781250 [10]: subch:0 RunGraph: already running
2008-02-01 17:10:33.781250 [10]: subch:0 SetupPmtGrabberid FFFFFFFF sid:FFFFFFFF
2008-02-01 17:10:35.781250 [10]: Scan: tuner locked:False signal:0 quality:0
2008-02-01 17:10:35.781250 [10]: Scan: no signal detected