TV-Server Version: 1.0.2
MediaPortal Version: 1.0.2
MediaPortal Skin: default
Windows Version: XP MCE
CPU Type: Atom 1.6 Dual Core
HDD: 500GB SATA
Memory: 2GB
Motherboardn/a:
Video Card: Intel builtin
Video Card Driver: n/a
Sound Card: Realtek internal
Sound Card AC3: n/a
Sound Card Driver: n/a
1. TV Card: USB DVB-S cheapo chinese with Sharp chipset
1. TV Card Type: DVB-S
1. TV Card Driver: n/a
2. TV Card: USB DVB-T cheapo chinese
2. TV Card Type: DVB-T
MPEG2 Video Codec: ffmpeg
MPEG2 Audio Codec: ffmpeg
h.264 Video Codec: n/a
Satelite/CableTV Provider: Freesat
HTPC Case: Noah
Cooling: Fan
Power Supply:
Remote: Hauppage MCE
TV: v old
TV - HTPC Connection: S-Video
PHEW!!
Ok, I have got both a cheapo USB DVB-S and a USB DVB-T dongle, both working fine with TVServer. They both find all the channels fine and they both record separately very well. However, I can't seem to get TVServer to record from both cards at the same time. So, if I choose one program on DVB-S to record and then choose another program (on a different channel) from DVB-T to record, TVServer will record the program that starts first, but will fail to record the second program on the other card.
I would have thought it wouldn't be a drive access issue as recording each stream is only about 12MB/Sec from what I have read and I am using a SATA drive.
I also noticed that when it records from the DVB-T card, TVServer stores the recording in the default Application Data/MediaPortal folder and not in the C:/recordings folder that I have set in General Settings in TVServer. As far as I can see there is no per-folder settings for each card.
Any ideas what might be wrong here, is this by design and why it is recording in the wrong folder??? Logs can be provided on request if needed.
I have already applied the DVB patch as mentioned in this forum and mentioned in a few post with a similiar topic to mine, but no solutions came out of those threads....
MediaPortal Version: 1.0.2
MediaPortal Skin: default
Windows Version: XP MCE
CPU Type: Atom 1.6 Dual Core
HDD: 500GB SATA
Memory: 2GB
Motherboardn/a:
Video Card: Intel builtin
Video Card Driver: n/a
Sound Card: Realtek internal
Sound Card AC3: n/a
Sound Card Driver: n/a
1. TV Card: USB DVB-S cheapo chinese with Sharp chipset
1. TV Card Type: DVB-S
1. TV Card Driver: n/a
2. TV Card: USB DVB-T cheapo chinese
2. TV Card Type: DVB-T
MPEG2 Video Codec: ffmpeg
MPEG2 Audio Codec: ffmpeg
h.264 Video Codec: n/a
Satelite/CableTV Provider: Freesat
HTPC Case: Noah
Cooling: Fan
Power Supply:
Remote: Hauppage MCE
TV: v old
TV - HTPC Connection: S-Video
PHEW!!
Ok, I have got both a cheapo USB DVB-S and a USB DVB-T dongle, both working fine with TVServer. They both find all the channels fine and they both record separately very well. However, I can't seem to get TVServer to record from both cards at the same time. So, if I choose one program on DVB-S to record and then choose another program (on a different channel) from DVB-T to record, TVServer will record the program that starts first, but will fail to record the second program on the other card.
I would have thought it wouldn't be a drive access issue as recording each stream is only about 12MB/Sec from what I have read and I am using a SATA drive.
I also noticed that when it records from the DVB-T card, TVServer stores the recording in the default Application Data/MediaPortal folder and not in the C:/recordings folder that I have set in General Settings in TVServer. As far as I can see there is no per-folder settings for each card.
Any ideas what might be wrong here, is this by design and why it is recording in the wrong folder??? Logs can be provided on request if needed.
I have already applied the DVB patch as mentioned in this forum and mentioned in a few post with a similiar topic to mine, but no solutions came out of those threads....