twhinhan dvb-s2 channal scanning crashes (1 Viewer)

[mindruler]

Hi all,

I have a twinhan dvb-s2 CI card
And want to use it with media portal.
The MP version 0.2.2.0 does not reconise the card but the RC1 0.2.3.0 does.
So I use the RC1 version.
I have also installed dot net 2.0 and 3.0.
Xp SP2 isfully updated.

The problem is when i scan channels from the MP config tool is scans about 1/3 and then crashes. The channels tat are scanned works oke but I'm dutch and he didn't scan the dutch channels...

Here are the last lines from the configuration log :

2007-08-01 14:25:59.968750 [Info.][3]: dvbs-scannto next transponder
2007-08-01 14:25:59.968750 [Info.][3]: dvbs-scan:tune transponder:25 freq:11797000 kHz symbolrate:27500 polarisation:0
2007-08-01 14:25:59.968750 [Info.][3]: DVBGraph: using profile diseqc 1 LNB:22 kHz diseqc:0 lnbKind:0
2007-08-01 14:25:59.968750 [Info.][3]: DVBGraph: LNB#1 Settings: freq=11797000 lnbKHz=11700000 lnbFreq=10600 diseqc=0
2007-08-01 14:25:59.968750 [Info.][3]: DVBGraphBDA: set LNBSwitch to 11700000 kHz lowOsc=9750 MHz hiOsc=10600 MHz disecq:0
2007-08-01 14:25:59.968750 [Info.][3]: DVBGraph: disEqc:none
2007-08-01 14:26:07.656250 [Info.][3]: DVBGraphBDA: signal strength:78 signal quality:98 signal present:True locked:True
2007-08-01 14:26:07.656250 [Info.][3]: DVBGraph: wait for tunerlock
2007-08-01 14:26:07.656250 [Info.][3]: dvbs-scan:signal quality:98 signal strength:78 signal present:True
2007-08-01 14:26:07.656250 [Info.][3]: DVBGraph: StoreChannels() signal level:78 signal quality:98 locked:True
2007-08-01 14:26:07.796875 [Info.][7]: FilterPids:13
2007-08-01 14:26:09.671875 [Info.][3]: check...True pids:13 0x0,0x10,0x11,0x66,0x65,0x67,0x60,0x61,0x6D,0x62,0x6C,0x63,0x6E,
2007-08-01 14:26:10.171875 [Info.][3]: channel:0/10 pid:0x66 ready
2007-08-01 14:26:10.171875 [Info.][3]: channel:1/10 pid:0x65 ready
2007-08-01 14:26:10.171875 [Info.][3]: channel:2/10 pid:0x67 ready
2007-08-01 14:26:10.171875 [Info.][3]: channel:3/10 pid:0x60 ready
2007-08-01 14:26:10.171875 [Info.][3]: channel:4/10 pid:0x61 ready
2007-08-01 14:26:10.171875 [Info.][3]: channel:5/10 pid:0x6D ready
2007-08-01 14:26:12.171875 [Info.][3]: DVBGraph: found 6
2007-08-01 14:26:12.171875 [Info.][3]: DVBGraph: channel PREMIERE 4 is a tv channel
2007-08-01 14:26:12.171875 [Info.][3]: DVBGraph: update channel PREMIERE 4:9:0 243
2007-08-01 14:26:12.171875 [Info.][3]: DVBGraph: map channel PREMIERE 4 id:243 to DVBS card:1
2007-08-01 14:26:12.187500 [Info.][3]: DVBGraph: channel PREMIERE 1 is a tv channel
2007-08-01 14:26:12.187500 [Info.][3]: DVBGraph: update channel PREMIERE 1:10:1 244
2007-08-01 14:26:12.187500 [Info.][3]: DVBGraph: map channel PREMIERE 1 id:244 to DVBS card:1
2007-08-01 14:26:12.203125 [Info.][3]: DVBGraph: channel PREMIERE 2 is a tv channel
2007-08-01 14:26:12.203125 [Info.][3]: DVBGraph: update channel PREMIERE 2:11:2 245
2007-08-01 14:26:12.203125 [Info.][3]: DVBGraph: map channel PREMIERE 2 id:245 to DVBS card:1
2007-08-01 14:26:12.218750 [Info.][3]: DVBGraph: channel PREMIERE SERIE is a tv channel
2007-08-01 14:26:12.234375 [Info.][3]: DVBGraph: update channel PREMIERE SERIE:16:7 246
2007-08-01 14:26:12.234375 [Info.][3]: DVBGraph: map channel PREMIERE SERIE id:246 to DVBS card:1
2007-08-01 14:26:12.250000 [Info.][3]: DVBGraph: channel PREMIERE KRIMI is a tv channel
2007-08-01 14:26:12.250000 [Info.][3]: DVBGraph: update channel PREMIERE KRIMI:23:14 247
2007-08-01 14:26:12.250000 [Info.][3]: DVBGraph: map channel PREMIERE KRIMI id:247 to DVBS card:1
2007-08-01 14:26:12.265625 [Info.][3]: DVBGraph: channel PREMIERE 3 is a tv channel
2007-08-01 14:26:12.265625 [Info.][3]: DVBGraph: update channel PREMIERE 3:43:34 248
2007-08-01 14:26:12.265625 [Info.][3]: DVBGraph: map channel PREMIERE 3 id:248 to DVBS card:1
2007-08-01 14:26:12.281250 [Info.][3]: dvbs-scannto next transponder
2007-08-01 14:26:12.281250 [Info.][3]: dvbs-scan:tune transponder:26 freq:11817000 kHz symbolrate:27500 polarisation:1
2007-08-01 14:26:12.281250 [Info.][3]: DVBGraph: using profile diseqc 1 LNB:22 kHz diseqc:0 lnbKind:0
2007-08-01 14:26:12.281250 [Info.][3]: DVBGraph: LNB#1 Settings: freq=11817000 lnbKHz=11700000 lnbFreq=10600 diseqc=0
2007-08-01 14:26:12.296875 [Info.][3]: DVBGraphBDA: set LNBSwitch to 11700000 kHz lowOsc=9750 MHz hiOsc=10600 MHz disecq:0
2007-08-01 14:26:12.296875 [Info.][3]: DVBGraph: disEqc:none
2007-08-01 14:26:20.000000 [Info.][3]: DVBGraphBDA: signal strength:75 signal quality:98 signal present:True locked:True


After this the program chrashes.

Can anyone help me please..


Gr. Richard







MediaPortal Version: 02.3.0 RC1
Windows Version: XP prof SP2
CPU Type: AMD 6000+
Memory: 2GB 800MHz ddr2
Motherboard: Asus M2n32-SLI
Video Card: Nvidia 7900GTO
1. TV Card: Twinhan dvb-s2 CI
[

 

[mbuzina]

Did you use the wizard to scan or the config prog? You should use the configuration program, the wizard seems to be buggy.

 

[mindruler]

Did you use the wizard to scan or the config prog? You should use the configuration program, the wizard seems to be buggy.

Yes I used the config prog because the wizzard crashes direct.
And the config tools crashed always on the same transponder (it looks that way).