Reply to thread

Message

Hello

The long delay with TV 3 is because TV Server first tries to use tuner 3 which does not have a CI configured, and then has problems tuning with tuner 2 as well.

You can reduce the delay by reducing the "PMT" setting here:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/06_General#Scan_Tab

...and also reduce the "wait for timeshifting file" and "wait for unscrambled signal" here:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/08_Timeshifting

For PMT, a safe setting is usually around 3 seconds.
For the other two settings, it depends on your CAM but maybe as low as 5 seconds.

Since tuner 3 is not configured [in DD config] to have access to your CAM, I suggest that you disable the CAM for that tuner in TV Server:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/02_TV_Servers#Edit_Tuner_Settings

This will tell TV Server to only use the tuner that has a CAM for the scrambled channels.

mm

<blockquote data-quote="mm1352000" data-source="post: 919383" data-attributes="member: 82144">Hello&nbsp;The long delay with TV 3 is because TV Server first tries to use tuner 3 which does not have a CI configured, and then has problems tuning with tuner 2 as well.&nbsp;You can reduce the delay by reducing the &quot;PMT&quot; setting here:<a href="http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/06_General#Scan_Tab" target="_blank">http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/06_General#Scan_Tab</a>&nbsp;...and also reduce the &quot;wait for timeshifting file&quot; and &quot;wait for unscrambled signal&quot; here:<a href="http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/08_Timeshifting" target="_blank">http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/08_Timeshifting</a>&nbsp;For PMT, a safe setting is usually around 3 seconds.For the other two settings, it depends on your CAM but maybe as low as 5 seconds.&nbsp;Since tuner 3 is not configured [in DD config] to have access to your CAM, I suggest that you disable the CAM for that tuner in TV Server:<a href="http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/02_TV_Servers#Edit_Tuner_Settings" target="_blank">http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/02_TV_Servers#Edit_Tuner_Settings</a>&nbsp;This will tell TV Server to only use the tuner that has a CAM for the scrambled channels.&nbsp;mm</blockquote>

[QUOTE="mm1352000, post: 919383, member: 82144"] Hello The long delay with TV 3 is because TV Server first tries to use tuner 3 which does not have a CI configured, and then has problems tuning with tuner 2 as well. You can reduce the delay by reducing the "PMT" setting here: [url]http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/06_General#Scan_Tab[/url] ...and also reduce the "wait for timeshifting file" and "wait for unscrambled signal" here: [url]http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/08_Timeshifting[/url] For PMT, a safe setting is usually around 3 seconds. For the other two settings, it depends on your CAM but maybe as low as 5 seconds. Since tuner 3 is not configured [in DD config] to have access to your CAM, I suggest that you disable the CAM for that tuner in TV Server: [url]http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/02_TV_Servers#Edit_Tuner_Settings[/url] This will tell TV Server to only use the tuner that has a CAM for the scrambled channels. mm [/QUOTE]