MediaPortal Version: 1.1.2.0
MediaPortal Skin: Black Glass
Windows Version: Vista Ultimate 32bit SP2
CPU Type: AMD Athlon Dual Core 4850e 2.5 GHz
HDD: WD 1TB+WD 2TB
Memory: 2GB DIMM DDR2
Motherboard: Gigabyte GA-MA78GM-S2H
Video Card: ATI Radeon HD 3200 Onboard
Video Card Driver: 8.632.0.0
Sound Card: Onboard
Sound Card AC3: no
Sound Card Driver:
1. TV Card: Askey Saber HB-220
1. TV Card Type: dual hybrid
1. TV Card Driver: 7.4.14.2
2. TV Card: PCTV Picostick 74e
2. TV Card Type: DVB-T
2. TV Card Driver: 1.4.3.8249
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: SAF 5.00 *final* (20110401)
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case: Silverstone LC-16
Cooling:
Power Supply:
Remote: iMON
TV: Philips 42PES00001
TV - HTPC Connection: Hdmi
I think I've found an issue in the tvserver configuration.
When I manually add a tvchannel I can't fill the details.
Steps to reproduce:
Start tvserver configuration
Go to tvchannels
Click "Add"
Fill in "Name" and click "Add"
There, select DVB-C, Ok
In next screen add:
Channel: 138
Frequency: 320000
NetworkId:0
TransportId:3
ServiceId:312
Symbolrate:6875
PmtId:3140
Leave provider empty
Modulation:Mod64Qam
Check "Free To Air"
Then click "OK", Error box appears stating "Please enter a valid network,transport and service id!"
The same happens if you select one of the channels already found at the channel scan, click edit, don't change anything, and then click "OK"
Edit: upon inspection of the FormDVBCTuningDetail.cs I see that the networkid may not be "0", but this is what the channel scanning returns, so I think this check could be relaxed to if (onid < 0 || tsid < 0 || sid < 0).
However when I fill "1" for networkid, no error message appears, but the form still won't close
MediaPortal Skin: Black Glass
Windows Version: Vista Ultimate 32bit SP2
CPU Type: AMD Athlon Dual Core 4850e 2.5 GHz
HDD: WD 1TB+WD 2TB
Memory: 2GB DIMM DDR2
Motherboard: Gigabyte GA-MA78GM-S2H
Video Card: ATI Radeon HD 3200 Onboard
Video Card Driver: 8.632.0.0
Sound Card: Onboard
Sound Card AC3: no
Sound Card Driver:
1. TV Card: Askey Saber HB-220
1. TV Card Type: dual hybrid
1. TV Card Driver: 7.4.14.2
2. TV Card: PCTV Picostick 74e
2. TV Card Type: DVB-T
2. TV Card Driver: 1.4.3.8249
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: SAF 5.00 *final* (20110401)
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case: Silverstone LC-16
Cooling:
Power Supply:
Remote: iMON
TV: Philips 42PES00001
TV - HTPC Connection: Hdmi
I think I've found an issue in the tvserver configuration.
When I manually add a tvchannel I can't fill the details.
Steps to reproduce:
Start tvserver configuration
Go to tvchannels
Click "Add"
Fill in "Name" and click "Add"
There, select DVB-C, Ok
In next screen add:
Channel: 138
Frequency: 320000
NetworkId:0
TransportId:3
ServiceId:312
Symbolrate:6875
PmtId:3140
Leave provider empty
Modulation:Mod64Qam
Check "Free To Air"
Then click "OK", Error box appears stating "Please enter a valid network,transport and service id!"
The same happens if you select one of the channels already found at the channel scan, click edit, don't change anything, and then click "OK"
Edit: upon inspection of the FormDVBCTuningDetail.cs I see that the networkid may not be "0", but this is what the channel scanning returns, so I think this check could be relaxed to if (onid < 0 || tsid < 0 || sid < 0).
However when I fill "1" for networkid, no error message appears, but the form still won't close