Reply to thread

Message

<blockquote data-quote="olddude" data-source="post: 853487" data-attributes="member: 121352">I've got a HDHomerun tuner, getting QAM off the cable, using MP 1.2.1.0. The signals are usually strong with great picture, except sometimes the non-HD local broadcast signals experience a weak signal. This is intermittent and doesn't really bother me too much. The problem I have is that scheduled recordings are frequently missed on these weak stations. For one station in particular, if I try to tune to it directly from the TV Guide, it will never tune to it...I get the No Signal pop-up. If I tune to the station next to it, and hit the Channel up, it always works, and I get 100% strength and 100% quality when it is tuned in. I've tried a signal booster on the cable, with no success. Any suggestions would be appreciated.&nbsp;Thanks for the great product and support.&nbsp;EDIT...Problem was solved by using the TV Server Configuration, TV Servers card settings...for each card, ATSC was used as the Preferred Network Provider (instead of Generic).&nbsp; Could have also solved the problem by Pausing the card on idle state instead of Stopping the card on idle state, but this would defeat the purpose of the network attached HDHomerun tuner, as the cards would be locked from use by others.</blockquote>

[QUOTE="olddude, post: 853487, member: 121352"] I've got a HDHomerun tuner, getting QAM off the cable, using MP 1.2.1.0. The signals are usually strong with great picture, except sometimes the non-HD local broadcast signals experience a weak signal. This is intermittent and doesn't really bother me too much. The problem I have is that scheduled recordings are frequently missed on these weak stations. For one station in particular, if I try to tune to it directly from the TV Guide, it will never tune to it...I get the No Signal pop-up. If I tune to the station next to it, and hit the Channel up, it always works, and I get 100% strength and 100% quality when it is tuned in. I've tried a signal booster on the cable, with no success. Any suggestions would be appreciated. Thanks for the great product and support. EDIT... Problem was solved by using the TV Server Configuration, TV Servers card settings...for each card, ATSC was used as the Preferred Network Provider (instead of Generic). Could have also solved the problem by Pausing the card on idle state instead of Stopping the card on idle state, but this would defeat the purpose of the network attached HDHomerun tuner, as the cards would be locked from use by others. [/QUOTE]

Verification