Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-03-11)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: CyberLink Video/SP Decoder (PCM45)
CPU Type: Intel Pentium D - 3.00GHz
Memory: 1 GB
Motherboard: MS-7204 (MICRO-STAR INTERNATIONAL CO., LTD)
TV Card Model: Medion SAA 7131
TV Card Type: -
TV Card Driver: 1.3.3.0
Video Card Model: Nvidia Geforce 6700 XL (128 MB)
Video Card Driver: 8.2.6.5
Video Card Resolution: 1024x768
Video Render Type: Overlay
Audio Card Model: Medion SAA7131, Hybrid Capture Device 2
Audio Card Driver: 5.10.0.5152
Synopsis:: -
After resuming from standby every button pressed on the X10 remote control acts as if it had been pressed twice.If placed into standby a second time every button acts if it has been pressed 4 times and so on.
1. Start Media Portal
2. Leave for 1 minute in home screen.(Powerscheduler timer setting)
3. PowerScheduler places Computer into standby. (have to use PowerScheduler as computer hangs with "preparing for standby" if manually try to place into standby.
4. Press power button to resume from standby
5 Computer resumes to Media Portal home screen.
6. Problem occures.
Have to close Media Portal down and restart to cure the problem.
EDIT: This bug also accures in RC3. Should I post the bug in that Threat? I realise the X10 remote is not as popular as the MCE, but is this bug ever likley to be fixed? If not I will have to buy an MCE remote. I have tested an MCE remote and that works fine, so it seems it's specific to the X10.
Apart from these annoying little bugs MP is fantastic. Thank you to everyone involved in the MP project
MediaPortal Version: 0.2.0.0 RC2 (2006-03-11)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: CyberLink Video/SP Decoder (PCM45)
CPU Type: Intel Pentium D - 3.00GHz
Memory: 1 GB
Motherboard: MS-7204 (MICRO-STAR INTERNATIONAL CO., LTD)
TV Card Model: Medion SAA 7131
TV Card Type: -
TV Card Driver: 1.3.3.0
Video Card Model: Nvidia Geforce 6700 XL (128 MB)
Video Card Driver: 8.2.6.5
Video Card Resolution: 1024x768
Video Render Type: Overlay
Audio Card Model: Medion SAA7131, Hybrid Capture Device 2
Audio Card Driver: 5.10.0.5152
Synopsis:: -
After resuming from standby every button pressed on the X10 remote control acts as if it had been pressed twice.If placed into standby a second time every button acts if it has been pressed 4 times and so on.
1. Start Media Portal
2. Leave for 1 minute in home screen.(Powerscheduler timer setting)
3. PowerScheduler places Computer into standby. (have to use PowerScheduler as computer hangs with "preparing for standby" if manually try to place into standby.
4. Press power button to resume from standby
5 Computer resumes to Media Portal home screen.
6. Problem occures.
Have to close Media Portal down and restart to cure the problem.
EDIT: This bug also accures in RC3. Should I post the bug in that Threat? I realise the X10 remote is not as popular as the MCE, but is this bug ever likley to be fixed? If not I will have to buy an MCE remote. I have tested an MCE remote and that works fine, so it seems it's specific to the X10.
Apart from these annoying little bugs MP is fantastic. Thank you to everyone involved in the MP project