- Thread starter
- #21
i realy don't understand why only the Bottom Light had a wrong color.
Was the color rotated, like Red was green or blue ?
I checked it again and the 0931 was programmed correct. No R,G,B values wrong assigned aso.
Hmm ?! Cause if the simulation Bars shows the correct colors, the output does the same.
I used the protokoll like the Atmo Wiki it said.
Byte Beschreibung
0 0xFF: Startbyte
1 0x00: Startkanal (low byte)
2 0x00: Startkanal (high byte)
3 0x0F: Anzahl Kanäle (15 = 5 * 3 (R, G, B))
4 - 6 Summenkanal R, G, B (Center)
7 - 9 linker Kanal R, G, B (Left)
10 - 12 rechter Kanal R, G, B (Right)
13 - 15 oberer Kanal R, G, B (Top)
16 - 18 unterer Kanal R, G, B (Bottom)
Let me check again.
rg
Frank
Was the color rotated, like Red was green or blue ?
I checked it again and the 0931 was programmed correct. No R,G,B values wrong assigned aso.
Hmm ?! Cause if the simulation Bars shows the correct colors, the output does the same.
I used the protokoll like the Atmo Wiki it said.
Byte Beschreibung
0 0xFF: Startbyte
1 0x00: Startkanal (low byte)
2 0x00: Startkanal (high byte)
3 0x0F: Anzahl Kanäle (15 = 5 * 3 (R, G, B))
4 - 6 Summenkanal R, G, B (Center)
7 - 9 linker Kanal R, G, B (Left)
10 - 12 rechter Kanal R, G, B (Right)
13 - 15 oberer Kanal R, G, B (Top)
16 - 18 unterer Kanal R, G, B (Bottom)
Let me check again.
rg
Frank