Only first pressed channel number appears in OSD

MediaPortal Version: 1.2.1
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 x64 SP1
CPU Type: Intel Celeron G530 (2.4 GHz)
HDD: Intel 320 Series SSD (40 GB)
Memory: Kingston 1066 MHz (4 GiB)
Motherboard: MSI H67MA-E35 (B3)
Video Card: nVidia GT 430 (fanless)
Video Card Driver: Latest
Sound Card: On-board GPU
Sound Card AC3: None
Sound Card Driver: Latest
1. TV Card: BlackGold BGT-3630
1. TV Card Type: DVB-T2 & DVB-S2
1. TV Card Driver: 8.1.1.2
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: LAV Video Decoder (CUVID)
MPEG2 Audio Codec: ffdshow tryouts
h.264 Video Codec: LAV Video Decoder (CUVID)
Satelite/CableTV Provider: Freesat (28.2° & 28.5° East)
HTPC Case: SilverStone Grandia GD04B
Cooling:
Power Supply: Antec EarthWatts EA 380D
Remote: Hama MCE Remote
TV: Bush HDTV
TV - HTPC Connection: HDMI

When changing channels, only the first number typed/pressed appears on the screen, but the correct channel appears.

For example, if I want to watch channel 51, I press "5" followed by "1" on my remote. On-screen, only "5" appears in the OSD (instead of "51"). A second or two later, it correctly switches to channel 51.

I don't remember this happening until recently so it may be a bug in MediaPortal 1.2.2.

Hey guys,

no problem here.. I think you have to go to the configuration -> TV -> max. channel length -> Change it in 2/3/ or what ever you want!

Hmmm, It was worth a try

I'm using MP 1.2.2 with 4TR and StreamedMP and like I said; Here is everything fine..

I'm getting this problem with MP 1.2.2, StreamedMP and maximum channel number length set to 3. Perhaps 4TR is the difference?

Only one digit in OSD when switching channel

MediaPortal Version: 1.2.2
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 x64 Pro SP1 (Server and Client)
CPU Type: Intel Pentium Dualcore E5200
HDD: QNAP 439 Pro, 4x2TB, RAID5
Memory: DDRII 4GB
Motherboard: ASUS P5N7A-VM
Video Card: Geforce 9300 mGPU
Video Card Driver: -
Sound Card: onboard
Sound Card AC3: optical out
Sound Card Driver: -
1. TV Card: Twinhan Mantis 3030
1. TV Card Type: DVB-T
1. TV Card Driver: 1.1.2.700
2. TV Card: Twinhan Mantis 3030
2. TV Card Type: DVB-T
2. TV Card Driver: 1.1.2.700
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MS DTV-DVD
MPEG2 Audio Codec: MS DTV-DVD
h.264 Video Codec: MS DTV-DVD
Satelite/CableTV Provider: Boxer
HTPC Case: Antec
Cooling: Boxed
Power Supply: Antec Earthwatts 380w
Remote: MCE Remote + Keyboard
TV: Sony 52" W5500 LCD-TV
TV - HTPC Connection: HDMI via NADT785HD AVR


This is just a minor issue, when switching channels from e.g. 1 (SVT1) to 10 (MTV) the OSD in upper left corner only shows one digit. '1' in this case.

I see the same behavior with StreamedMP.