[confirm] TsWriter starts but long delay before playback (1 Viewer)

doveman

Portal Pro
February 12, 2008
2,326
178
Home Country
United Kingdom United Kingdom
I just tuned to Ch5 and although the tv.log and TsWriter show things happened around 20:49:27, it didn't start playing for ages and TsReader and evr.log show that it didn't start until 20:50:20.
 

mm1352000

Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Very strange. Seems like MP was waiting for TV Server to say it had finished tuning the channel.

    The following log lines are a clue:
    2012-09-04 20:49:30.710602 [(18)]: card: SignalTuneEvent card: 7 / subch: 0
    2012-09-04 20:49:30.712603 [(18)]: Controller: X4 7 0
    2012-09-04 20:49:30.714603 [(18)]: control2:X4 7 0
    2012-09-04 20:49:30.717103 [(22)]: PID seen - type = Audio
    2012-09-04 20:49:30.718603 [(22)]: audio last seen at 04/09/2012 20:49:30
    2012-09-04 20:49:30.721104 [Channel state thread(7)]: Controller: DoSetChannelStates for 49 channels
    2012-09-04 20:49:30.725604 [Channel state thread(7)]: ChannelStates.GetAllTimeshiftingAndRecordingChannels took 2 msec
    2012-09-04 20:49:30.738606 [Channel state thread(7)]: ChannelStates.DoSetChannelStates took 17 msec
    2012-09-04 20:49:31.482700 [PowerScheduler poll thread(14)]: PowerScheduler: System changed from idle state to busy state
    2012-09-04 20:49:48.541867 [PowerScheduler poll thread(14)]: ActiveSharesHandler: Share monitoring is disabled.
    2012-09-04 20:50:16.204879 [(18)]: CiMenuSupported called cardid 7
    2012-09-04 20:50:16.206880 [(18)]: CiMenuSupported card IT9135 BDA Filter supported: False
     

    doveman

    Portal Pro
    February 12, 2008
    2,326
    178
    Home Country
    United Kingdom United Kingdom
    Very strange. Seems like MP was waiting for TV Server to say it had finished tuning the channel.

    The following log lines are a clue:

    Strange indeed. I had another problem with Ch5 later on that evening, where it said "No signal" when attempting to tune to it but then on the second attempt it worked fine. Perhaps I should just try deleting all the channels and rescanning to clear any gremlins out of the database? Or maybe running a fix command on the database would be less hassle if you could remind me how to do that?

    I'm not on that OS at the moment so can't run the Log Collector but I've put what I think are the relevant logs in the attached zip. I'm not sure what time it happened and I can't find any other times I tuned Ch5 except for 20:49, so I'm a bit confused!

    Don't worry about the errors today, I think that's just because on the OS I'm currently booted to the TVservice is set to Manual.
     

    Users who are viewing this thread

    Similar threads

    MP1 MP2 1.23.0 Slow rendering times DE
    interesting...i use DRR in MP + Win 7, though i must admit i haven't watch much content lately using DRR. Might explain why i seen it more rarely than OP... i'll try some more testing using DRR, i usually switch between 50Hz p, for 25fps (dvb-t FTA ) content to 23.976 Hz for 23.976fps content, then back to 50Hz...
    interesting...i use DRR in MP + Win 7, though i must admit i haven't watch much content lately using DRR. Might explain why i seen...
    I fully realize that this is probably not the correct place, or a correct bugreport, but since a while (maybe a month?) I have some...
    Replies
    46
    Views
    8K
    Hi there, i didn't find any hint for my problem but i managed it so far. Just in case someone else will have this trouble, here is the solution. Problem: The video playback seems not to be started, the picture comes approx. 30 seconds after the sound is coming. Not out of sync but very late. If you stop the playback in this time it...
    Hi there, i didn't find any hint for my problem but i managed it so far. Just in case someone else will have this trouble, here is...
    Hi there, i didn't find any hint for my problem but i managed it so far. Just in case someone else will have this trouble, here is...
    Replies
    0
    Views
    2K
    Yes, better there.
    Yes, better there.
    NOTE: Original post edited to update on each issue. Hi all, This is my first post on here, having just come from a fairly well...
    Replies
    19
    Views
    5K
    Hi @mm1352000 I have new questions about raw TS recording: I've now bought TS Doctor v2.0 and I thought I'd do a check again to see if it finds anything different than v1.0 and I also did a check on the full transponder recording that I provided to you (which I hadn't thought of doing at the time), and I found this which I find weird...
    Hi @mm1352000 I have new questions about raw TS recording: I've now bought TS Doctor v2.0 and I thought I'd do a check again to see...
    MediaPortal Version: 1.16.0 Description Hello everyone. When trying to record a movie this weekend I noticed an issue on a TV...
    Replies
    10
    Views
    6K
    MP1 MP2 [solved] HEVC playback issue DE
    Tried with a custom LAV build from @Sebastiii (0.68.5 git) and got a bit further :) - Works with MPC-HC (no image corruption) as subtitle engine however no subtitle selection for that sample - With DirectVobSub I get the subtitle selection however also the image corruption back So while not perfect at least I can have MPC-HC for...
    Tried with a custom LAV build from @Sebastiii (0.68.5 git) and got a bit further :) - Works with MPC-HC (no image corruption) as...
    Hi, Been trying out some 2160P releases recently and came across an odd issue with HEVC playback, it will run at a reduced...
    Replies
    16
    Views
    5K
    Top Bottom