[confirm] 1.10rc6 tvsever only work first scan (1 Viewer)

[god_md5]

i use windows 7 x64 and use 1.02 long time ,in same hardware,use english epg,work very good about 2 year
i install the rc6 ,than scan the channel is work ,and i set the chinese epg ,hongkong is use utf-16
it hang it this time..
maybe utf-16 is not support ?
like is the MediaPortal kill the tvserver ?

 

[god_md5]

reboot and not set epg is work,english epg is not work too,if set than hang the tvserver..

 

[elliottmc]

I find that if you select 'store EPG data only for these channels' and then select all the channels in the list, this helps.

Mind you, I did this ages ago when things were not working well, and now I do it as a superstition. Maybe it doesn't really help, but no harm trying.

Mark

 

[god_md5]

same not work ,the tvserver is not have hang ,but like the tvcard can not find or cannot tune the channel.
i have look log and driver inf.maybe only have two epg language broadcast have this error?
tv log
=====================
2010-07-09 08:31:36.645515 [(6)]: dvbt:found correct tuningspace MediaPortal DVBT TuningSpace
2010-07-09 08:31:36.645515 [(6)]: dvb:Add MPEG2 Demultiplexer filter
2010-07-09 08:31:36.645515 [(6)]: dvb:add Inf Tee filter
2010-07-09 08:31:36.661115 [(6)]: dvb:AddAndConnectBDABoardFilters
2010-07-09 08:31:36.661115 [(6)]: dvb: find bda tuner
2010-07-09 08:31:36.692315 [(6)]: dvb: using [Tuner]: Digital TV
2010-07-09 08:31:36.692315 [(6)]: dvb: Render [Network provider]->[Tuner] OK
2010-07-09 08:31:36.692315 [(6)]: dvb: Find BDA receiver
2010-07-09 08:31:36.692315 [(6)]: dvb: match Capture by Tuner device path
2010-07-09 08:31:36.692315 [(6)]: dvb: -Conexant 23885 AVStream TS Capture
2010-07-09 08:31:36.692315 [(6)]: dvb: Render [Tuner]->[Capture] AOK
2010-07-09 08:31:36.707915 [(6)]: dvb: WinTv CI module not detected.
2010-07-09 08:31:36.707915 [(6)]: dvb: Render [capture]->[inftee]
2010-07-09 08:31:36.707915 [(6)]: dvb: OK
2010-07-09 08:31:36.707915 [(6)]: dvb: Render [inftee]->[demux]
2010-07-09 08:31:36.707915 [(6)]: dvb: Add Mediaportal TsWriter filter
2010-07-09 08:31:36.723516 [(6)]: dvb: Render [InfTee]->[TsWriter]
2010-07-09 08:31:36.723516 [(6)]: CAM is Default model
2010-07-09 08:31:36.723516 [(6)]: Check for KNC
2010-07-09 08:31:36.723516 [(6)]: KNC: IsKNC False
2010-07-09 08:31:36.739116 [(6)]: KNC: Disable CI
2010-07-09 08:31:36.739116 [(6)]: KNC: Disposing CI handler
2010-07-09 08:31:36.739116 [(6)]: Check for Digital Everywhere
2010-07-09 08:31:36.739116 [(6)]: Check for Twinhan
2010-07-09 08:31:36.739116 [(6)]: Twinhan: CI detection finished
2010-07-09 08:31:36.739116 [(6)]: Check for TechnoTrend
2010-07-09 08:31:36.739116 [(6)]: TechnoTrend: Closing hardware
2010-07-09 08:31:36.754716 [(6)]: Check for Hauppauge
2010-07-09 08:31:36.754716 [(6)]: Hauppauge: DVB-S card NOT found!
2010-07-09 08:31:36.754716 [(6)]: Check for ProfRed
2010-07-09 08:31:36.754716 [(6)]: Check for TeVii
2010-07-09 08:31:36.754716 [(6)]: Check for Conexant based card
2010-07-09 08:31:36.754716 [(6)]: Conexant BDA: DVB-S card NOT found!
2010-07-09 08:31:36.754716 [(6)]: Check for GenPix BDA based card
2010-07-09 08:31:36.754716 [(6)]: GenPix tuner filter name: Digital TV
2010-07-09 08:31:36.754716 [(6)]: GenPix tuner filter pin name: MPEG2 Transport
2010-07-09 08:31:36.754716 [(6)]: GenPix BDA: DVB-S card NOT found!
2010-07-09 08:31:36.754716 [(6)]: Check for Generic DVB-S card
2010-07-09 08:31:36.770316 [(6)]: GenericBDAS: DiSEqC capable card found!
2010-07-09 08:31:36.770316 [(6)]: Generic BDA card detected
2010-07-09 08:31:36.770316 [(6)]: Check for Hauppauge WinTV CI
2010-07-09 08:31:36.770316 [(6)]: dvb: AddTransportStreamFiltersToGraph
2010-07-09 08:31:36.770316 [(6)]: add BDA MPEG2 Transport Information Filter filter
2010-07-09 08:31:36.770316 [(6)]: pinTif:name:IB Input [3/1] Direction:Input Connected:False
2010-07-09 08:31:36.770316 [(6)]: Connect tif and mpeg2 sections and tables
2010-07-09 08:31:36.770316 [(6)]: dvb:try tif:name:001 [5/1] Direction:Output Connected:False
2010-07-09 08:31:36.770316 [(6)]: tif connected
2010-07-09 08:31:36.801516 [(6)]: dvb: GetTunerSignalStatistics()
2010-07-09 08:31:36.801516 [(6)]: dvb:GetNewSubChannel:0 #0
2010-07-09 08:31:36.801516 [(6)]: TvDvbChannel ctor new subchIndex:0
2010-07-09 08:31:36.817116 [(6)]: dvbubmiting tunerequest Channel:Jade subChannel:0
2010-07-09 08:31:36.817116 [(6)]: dvb:using existing subchannel:0
2010-07-09 08:31:36.817116 [(6)]: dvbubmit tunerequest size:1 new:0
2010-07-09 08:31:36.817116 [(6)]: subch:0 OnBeforeTune
2010-07-09 08:31:36.817116 [(6)]: dvbubmit tunerequest calling put_TuneRequest
2010-07-09 08:31:36.817116 [(6)]: dvbubmit tunerequest done calling put_TuneRequest
2010-07-09 08:31:36.817116 [(6)]: subch:0 OnAfterTune
2010-07-09 08:31:36.817116 [(6)]: subch:0 OnGraphStart
2010-07-09 08:31:36.817116 [(6)]: dvb: RunGraph
2010-07-09 08:31:36.817116 [(6)]: dvb: RunGraph returns: 0x800705AA
2010-07-09 08:31:36.832716 [(6)]: tvcard:FreeSubChannel: subchannels count 1 subch#0 keep graph=False
2010-07-09 08:31:36.832716 [(6)]: DVB subch:0 Decompose()
2010-07-09 08:31:36.832716 [(6)]: FreeSubChannel CA: freeing sub channel : 0
2010-07-09 08:31:36.832716 [(6)]: tvcard:FreeSubChannel : no subchannels present, stopping graph
2010-07-09 08:31:36.832716 [(6)]: dvbtopGraph called
2010-07-09 08:31:36.832716 [(6)]: tvcard:FreeAllSubChannels
2010-07-09 08:31:36.832716 [(6)]: dvbtopGraph filterstate already stopped, returning.
2010-07-09 08:31:38.923119 [(6)]: Controller: epg stop
=====================
error log
2010-07-09 08:31:36.832716 [(6)]: Exception :TvLibrary.TvException: Unable to start graph
at TvLibrary.Implementations.DVB.TvCardDvbBase.RunGraph(Int32 subChannel)
at TvLibrary.Implementations.DVB.TvCardDvbBase.Tune(Int32 subChannelId, IChannel channel)
at TvLibrary.Implementations.DVB.TvCardDVBT.Tune(Int32 subChannelId, IChannel channel)
=====================
epg log
2010-07-09 08:20:02.193696 [TVService(5)]: EPG: grabber initialized for 3 transponders..
2010-07-09 08:20:03.738098 [DVB EPG timer(5)]: Grab for card:#1 transponder #1/3 channel: Jade
2010-07-09 08:20:03.738098 [DVB EPG timer(5)]: EpgCard: grab epg on card: #1 transponder: #0 ch:Jade
2010-07-09 08:20:16.077720 [DVB EPG timer(5)]: EpgGrabbing: Start
2010-07-09 08:20:16.093320 [DVB EPG timer(5)]: EpgCard: card: 1 starting to grab DVBT:tv:TVB Jade Freq:570000 ONID:32765 TSID:1 SID:1 PMT:0x32A FTA:True LCN:81 BandWidth:8
2010-07-09 08:31:31.263506 [TVService(5)]: EPG: grabber initialized for 3 transponders..
2010-07-09 08:31:32.371108 [DVB EPG timer(5)]: Grab for card:#1 transponder #1/3 channel: Jade
2010-07-09 08:31:32.371108 [DVB EPG timer(5)]: EpgCard: grab epg on card: #1 transponder: #0 ch:Jade
2010-07-09 08:31:35.803114 [(6)]: EPG: grabber stopped..
2010-07-09 08:31:36.832716 [DVB EPG timer(5)]: Epg: card:1 could not tune to channel:UnknownError
2010-07-09 08:31:36.848316 [DVB EPG timer(5)]: EpgCard: unable to grab epg transponder: 0 ch: Jade started on -1
2010-07-09 08:31:36.848316 [DVB EPG timer(5)]: DVBT:tv:TVB Jade Freq:570000 ONID:32765 TSID:1 SID:1 PMT:0x32A FTA:True LCN:81 BandWidth:8

driver inf
==================
;---------------------------------------------------------------
; S t r i n g s
;---------------------------------------------------------------

[Strings]
Conexant.Cx23885.Drivers.Disk="Conexant CX23885 Drivers"
ProviderCompany = "Conexant"
SERVICE_DISPLAY_NAME = "Cx23885 Service Driver"
SERVICE_DESCRIPTION = "Cx23885 Service Driver"
KsNameFilter = "{9B365890-165F-11D0-A195-0020AFD156E4}"
Proxy.CLSID = "{17CCA71B-ECD7-11D0-B908-00A0C9223196}"
CX23885.DeviceDesc = "Conexant 23885 AvStream Video Capture"
MediaCategories = "SYSTEM\CurrentControlSet\Control\MediaCategories"
GUID.PINNAME_ANALOG_AUDIO_IN = "{04394D28-52A7-4c46-AED0-65D62CC64DA6}"
Pin.p2AnalogAudioIn = "Analog Audio In"
GUID.PINNAME_AUDIO_OUT = "{9DA02733-7910-40f2-95DD-0441676C9A9B}"
PinName.AnalogAudioOut = "Audio Out"
TVAudioFriendlyName = "Conexant 23885 TvAudio"
TVAudioReferenceGuid = "{991182D5-71A2-4b5c-9817-F551FBBC8232}"
XBARFriendlyName = "Conexant 23885 Crossbar"
XBARReferenceGUID = "{77F656DA-696D-407c-BA1C-50E4457C12E8}"
TunerFriendlyName = "Conexant 23885 Tuner"
TunerReferenceGuid = "{5618011C-A4DA-455b-A448-EC2AF3DCCB02}"
TSPinID = "{5237C937-0A21-4f7e-B338-DE0D0793D03F}"
TSPinName = "TS Out"
BDATuneReferenceGuid = "{E01E1072-3DF3-4c23-B99F-6A27A7CC7CD2}"
TSFriendlyName = "Conexant 23885 AVStream TS Capture"
TSReferenceGuid = "{5ea9c066-1dfe-41c5-a2de-bf766e83c98e}"
BDATuneReferenceGuid_2 = "{279008e8-834b-46cc-9bda-d1e6d57d7f25}"
TSReferenceGuid_2 = "{e009cfeb-b8ea-4256-bb5c-ba15666e2612}"
AudioFriendlyName = "Conexant 23885 Audio Capture"
AudioReferenceGuid = "{AB766B70-AFB3-4461-A4DE-22E9C516B7FE}"
EncoderFriendlyName = "Conexant 23885 MPEG Encoder"
EncoderReferenceGuid = "{1C10193D-7DCA-4f55-99D8-B017AAD3921D}"
GUID.Encoder = "{19689BF6-C384-48fd-AD51-90E58C79F70B}"
GUID.Multiplexer = "{7A5DE1D3-01A1-452c-B481-4FA2B96271E8}"
Category_Encoders = "WDM Streaming Encoder Devices"
Category_Multiplexers = "WDM Streaming Multiplexer Devices"
Node.Encoder = "Encoder"
Node.Multiplexer = "Multiplexer"
GUID.PINNAME_656_IN = "{DFD530C7-36D9-47ff-B838-9A11D215B140}"
PinName.656_IN = "656"
GUID.PINNAME_656_OUT = "{E2EEB283-EB84-4910-BABE-037FFBB03249}"
PinName.656_OUT = "656"
GUID.PINNAME_MPEG_OUT = "{1649D2C1-435E-11d3-A94B-00A0C9D8B34E}"
PinName.MpegOut = "MPEG"
GUID.IVAC_PROPERTIES = "{87489F71-B890-4ba2-A88B-03E0B1A4EC1D}"
GUID.General_Properties = "{F6E6FBD9-FE5D-419d-B994-57FB20AAED1D}"
GUID.Video_Properties = "{5D64F5ED-1526-46f5-B510-AA93437FFA6E}"
GUID.Audio_Properties = "{9D52CFF7-0DB7-4300-B936-844105E64E9E}"
GUID.MPEG_Properties = "{A6ABB595-D3B7-4fdf-A418-F2C79E6E1C14}"
GUID.Diagnostic_Properties = "{18759BBE-6A06-4118-9A57-E833AD670B81}"
GUID.Noise_Properties = "{10E2DF32-3EC5-4551-BAE6-6D8F6B6C853A}"

MediaSets = "System\CurrentControlSet\Control\MediaSets"
ActiveMovieCategories = "CLSID\{da4e3da0-d07d-11d0-bd50-00a0c911ce86}\Instance"

 

[tourettes]

I see following error in the logs:

Error 0x800705AA: Insufficient system resources exist to complete the requested service.

Usually it is result of bad drivers or HW. For example I have had such happening in two different occasions with FloppyDTV DVB-C card.

1) card was going to die
2) another card was getting too hot

But it is strange that it would happen only with the EPG grabbing.

 

[god_md5]

i not sure the bug is from here or not ,about 2 year ..
https://forum.team-mediaportal.com/...ext-encoding-dvb-channel-names-epg-etc-66579/

 

[god_md5]

i find the hardware die happening in two program open the hardware same time.
i try in 1.02 and smartdvb it can get same error.
so the 1.10rc6 maybe use the same hardware in same time ,kill the hardware