Reply to thread

Message

<blockquote data-quote="coennie" data-source="post: 536455" data-attributes="member: 79684">thanks for your quick reply drazic, I will try to do a search on mdapi then.When I let ACamD connect to AnyCam, ACamD log responds with log entries below. Anyone had any more clues? I'm using the 2009-08-14 drivers from the anysee website.21:24:12.406: COM5: open serial port21:24:12.406: COM5: set serial options: 9600,SM_8O121:24:12.406: smartcards: added serial port COM5 as port 0 (normal CD, normal RESET, CLOCK 3571200)21:24:12.625: 0: new card inserted21:24:12.625: COM5: set serial options: 9600,SM_8O121:24:12.625: 0: reseting card21:24:14.375: 0: direct convention detected21:24:14.375: 0: atr decoding TS=3b hist=15 Y1=90 TA1=21 F=558 D=1.000000 TD1=0e T=14 Y2=00 21:24:14.375: 0: historical: 49 52 44 45 54 4f 20 41 43 53 20 56 35 2e 3321:24:14.375: 0: historical: 'IRDETO ACS V5.321:24:14.375: 0: atr checksum ok21:24:14.375: 0: long atr read=33 len=2021:24:14.375: 0: indicated wwt(T0)=1500 ms, bwt(T1)=1600 ms (at 3.5712 MHz)21:24:14.375: 0: Init Irdeto card21:24:14.375: 0: use Irdeto (at 6.0000 MHz) recalculated baudrate 1075221:24:14.375: COM5: set serial options: 10752,SM_8N221:24:14.609: ACS Version 0606, CAID 0604, CoCo NLD21:24:14.765: ASCII serial 4027578635T8070000A21:24:15.046: Providers: 4 HEX Serial: F29333&nbsp; HEX Base: 1921:24:15.890: 0: unknown (status: 00 92)21:24:15.890: card didn't give a proper reply (buggy RSA unit?), trying to continue...21:24:16.390: 0: CAM string rejected (status: 57 00)21:24:16.390: camkey error21:24:16.390: 0: can't initialise new card, ignoring port until card reinserted</blockquote>

[QUOTE="coennie, post: 536455, member: 79684"] thanks for your quick reply drazic, I will try to do a search on mdapi then. When I let ACamD connect to AnyCam, ACamD log responds with log entries below. Anyone had any more clues? I'm using the 2009-08-14 drivers from the anysee website. 21:24:12.406: COM5: open serial port 21:24:12.406: COM5: set serial options: 9600,SM_8O1 21:24:12.406: smartcards: added serial port COM5 as port 0 (normal CD, normal RESET, CLOCK 3571200) 21:24:12.625: 0: new card inserted 21:24:12.625: COM5: set serial options: 9600,SM_8O1 21:24:12.625: 0: reseting card 21:24:14.375: 0: direct convention detected 21:24:14.375: 0: atr decoding TS=3b hist=15 Y1=90 TA1=21 F=558 D=1.000000 TD1=0e T=14 Y2=00 21:24:14.375: 0: historical: 49 52 44 45 54 4f 20 41 43 53 20 56 35 2e 33 21:24:14.375: 0: historical: 'IRDETO ACS V5.3 21:24:14.375: 0: atr checksum ok 21:24:14.375: 0: long atr read=33 len=20 21:24:14.375: 0: indicated wwt(T0)=1500 ms, bwt(T1)=1600 ms (at 3.5712 MHz) 21:24:14.375: 0: Init Irdeto card 21:24:14.375: 0: use Irdeto (at 6.0000 MHz) recalculated baudrate 10752 21:24:14.375: COM5: set serial options: 10752,SM_8N2 21:24:14.609: ACS Version 0606, CAID 0604, CoCo NLD 21:24:14.765: ASCII serial 4027578635T8070000A 21:24:15.046: Providers: 4 HEX Serial: F29333 HEX Base: 19 21:24:15.890: 0: unknown (status: 00 92) 21:24:15.890: card didn't give a proper reply (buggy RSA unit?), trying to continue... 21:24:16.390: 0: CAM string rejected (status: 57 00) 21:24:16.390: camkey error 21:24:16.390: 0: can't initialise new card, ignoring port until card reinserted [/QUOTE]

Verification