Reply to thread

Message

<blockquote data-quote="pwhooftman" data-source="post: 553036" data-attributes="member: 98208">Re: AnyCam v1.0bHi Drazic,I followed <a href="http://zepman.tweakblogs.net/blog/2228/ziggo-digitale-tv-op-de-pc.html" target="_blank">zepmans</a> guide to install Acamd (without installing card sharing server newcs because i presume anycam acts as a card sharing server).I determined my CAID (0634) and put it in the last line of cardclient.conf like this:[CODE]## Comment lines can start with # or ;## every client line starts with the client name, followed by some arguments:# 'hostname' is the name of the server# 'port'&nbsp; &nbsp;&nbsp; is the port on the server# 'emm'&nbsp; &nbsp; &nbsp; is a flag to allow EMM transfers to the server#&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; (0=disabled 1=enabled)# 'caid'&nbsp; &nbsp;&nbsp; (optional) caid on which this client should work# 'mask'&nbsp; &nbsp;&nbsp; (optional) mask for caid e.g. caid=1700 mask=FF00 would allow#&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; anything between 1700 &amp; 17FF.#&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Default is 1700 &amp; FF00. If only caid is given mask is FFFF.#&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; You may give multiple caid/mask values comma separated#&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; (e.g. 1702,1722,0d0c/ff00).# 'username' is the login username# 'password' is the login password## newcamd client# 'cfgkey' is the config key (28bytes)## newcamd client# 'providerid(s)' add provider id's for filtering 0000006A,0000006D## radegast client# No EMM support## gbox client# UDP localhost only, default ports, No EMM support## gboxn client# servername, serverport, emm, [caid/mask], serverpassword, pcname, pcport, pcpassword, free text## camd35 client # UDP protocol##radegast:192.168.7.54:10001:0/0000/0000#gbox:0.0.0.0:0:0/0000/0000#camd35:192.168.7.54:24110:1/0000/0000:username:password#newcamd:192.168.7.54:34000:1/0000/0000:username:password:0102030405060708091011121314#newcamd:192.168.7.54:34001:1/0100/ff00:username:password:0102030405060708091011121314:0000006A#emubox03:192.168.7.54:10000:0/0000/0000#gboxn:192.168.7.54:6600:0/0000/0000:AA34BB78:192.168.7.53:6601:AA34BB71:Server 1newcamd:127.0.0.1:15050:1/0634/ffff:gebruiker1:wachtwoord1:0102030405060708090A0B0C0D0E[/CODE]But obviously, there's nothing listening on port 15050 because i haven't set up the newcs card sharing client. So the acamd window shows multiple:[CODE]17:57:38.640: Login attemp (1)17:57:38.640: connecting to 127.0.0.1:15050/tcp (127.0.0.1)17:57:38.640: socket: connect failed: Winsock Error 10049: Cannot assign requested address.[/CODE]&nbsp;Do i even need a cardclient.conf, and what should i put in the last line?Thanks a lot for reading</blockquote>

[QUOTE="pwhooftman, post: 553036, member: 98208"] [b]Re: AnyCam v1.0b[/b] Hi Drazic, I followed [URL="http://zepman.tweakblogs.net/blog/2228/ziggo-digitale-tv-op-de-pc.html"]zepmans[/URL] guide to install Acamd (without installing card sharing server newcs because i presume anycam acts as a card sharing server). I determined my CAID (0634) and put it in the last line of cardclient.conf like this: [CODE]# # Comment lines can start with # or ; # # every client line starts with the client name, followed by some arguments: # 'hostname' is the name of the server # 'port' is the port on the server # 'emm' is a flag to allow EMM transfers to the server # (0=disabled 1=enabled) # 'caid' (optional) caid on which this client should work # 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow # anything between 1700 & 17FF. # Default is 1700 & FF00. If only caid is given mask is FFFF. # You may give multiple caid/mask values comma separated # (e.g. 1702,1722,0d0c/ff00). # 'username' is the login username # 'password' is the login password # # newcamd client # 'cfgkey' is the config key (28bytes) # # newcamd client # 'providerid(s)' add provider id's for filtering 0000006A,0000006D # # radegast client # No EMM support # # gbox client # UDP localhost only, default ports, No EMM support # # gboxn client # servername, serverport, emm, [caid/mask], serverpassword, pcname, pcport, pcpassword, free text # # camd35 client # UDP protocol # #radegast:192.168.7.54:10001:0/0000/0000 #gbox:0.0.0.0:0:0/0000/0000 #camd35:192.168.7.54:24110:1/0000/0000:username:password #newcamd:192.168.7.54:34000:1/0000/0000:username:password:0102030405060708091011121314 #newcamd:192.168.7.54:34001:1/0100/ff00:username:password:0102030405060708091011121314:0000006A #emubox03:192.168.7.54:10000:0/0000/0000 #gboxn:192.168.7.54:6600:0/0000/0000:AA34BB78:192.168.7.53:6601:AA34BB71:Server 1 newcamd:127.0.0.1:15050:1/0634/ffff:gebruiker1:wachtwoord1:0102030405060708090A0B0C0D0E[/CODE] But obviously, there's nothing listening on port 15050 because i haven't set up the newcs card sharing client. So the acamd window shows multiple: [CODE]17:57:38.640: Login attemp (1) 17:57:38.640: connecting to 127.0.0.1:15050/tcp (127.0.0.1) 17:57:38.640: socket: connect failed: Winsock Error 10049: Cannot assign requested address.[/CODE] Do i even need a cardclient.conf, and what should i put in the last line? Thanks a lot for reading [/QUOTE]

Verification