Reply to thread

Message

<blockquote data-quote="Paul S" data-source="post: 145389" data-attributes="member: 20531">I see this in your Media Portal.log:[CODE] TVCapture.Start Viewing() Card:2 :11 KPBS2007-04-21 19:58:01.281250 [Info.][6]: DVBGraph:StartViewing() 11 KPBS2007-04-21 19:58:01.281250 [Info.][6]: vmr9:addvmr92007-04-21 19:58:01.296875 [Info.][6]: VMR9Helper: enabled YUV mixing - No DX Error2007-04-21 19:58:01.296875 [Info.][6]: VMR9: now active2007-04-21 19:58:01.296875 [Info.][6]: VMR9Helper:Vmr9 Added2007-04-21 19:58:01.328125 [Info.][6]: DVBGraph:database invalid tuning details for channel:102007-04-21 19:58:01.328125 [Info.][6]: Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:Failed to start TVNo tuning information for 11 KPBS time:1187.5 msec[/CODE]If you check the channel details, I suspect they are most likely blank. Also, the card priority is set to 10. change this to 1 and the analog to 10. Are all of the card settings correct?You may want to delete both cards and add only the ATSC for now. The logs will only show the info for one card then. Have you tried viewing the graph it is making while channel scanning? Use GraphEdit, there may be more than one graph, so look for the one that is most complete.</blockquote>

[QUOTE="Paul S, post: 145389, member: 20531"] I see this in your Media Portal.log: [CODE] TVCapture.Start Viewing() Card:2 :11 KPBS 2007-04-21 19:58:01.281250 [Info.][6]: DVBGraph:StartViewing() 11 KPBS 2007-04-21 19:58:01.281250 [Info.][6]: vmr9:addvmr9 2007-04-21 19:58:01.296875 [Info.][6]: VMR9Helper: enabled YUV mixing - No DX Error 2007-04-21 19:58:01.296875 [Info.][6]: VMR9: now active 2007-04-21 19:58:01.296875 [Info.][6]: VMR9Helper:Vmr9 Added 2007-04-21 19:58:01.328125 [Info.][6]: DVBGraph:database invalid tuning details for channel:10 2007-04-21 19:58:01.328125 [Info.][6]: Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:Failed to start TV No tuning information for 11 KPBS time:1187.5 msec[/CODE] If you check the channel details, I suspect they are most likely blank. Also, the card priority is set to 10. change this to 1 and the analog to 10. Are all of the card settings correct? You may want to delete both cards and add only the ATSC for now. The logs will only show the info for one card then. Have you tried viewing the graph it is making while channel scanning? Use GraphEdit, there may be more than one graph, so look for the one that is most complete. [/QUOTE]

Verification