Reply to thread

Message

<blockquote data-quote="Wolvyrine" data-source="post: 93430" data-attributes="member: 27179">kWorld ATSC110 card and questionsOk, I am an extreme noob when it comes to all this so please bear this in mind while reading. I have treid to browse though theese forums, but there is just SO much information, and to be honest theres so much of it I dont understand. I could be reading what I need to know, and not know thats what I need lol. So as to not take up too much more of your time here is the kernel of my issues.I went with MP after a heartbreaking and infuriating attempt with the BeyondTV3se that came with my card refused to do more than make me want to commit some form&nbsp; of violence against my computer. So far I am greatly impressed. I am having a few issues and am unsure as to what I can do to resolve them. I am using the afore mentioned card with a small HD antennae and a signal booster. I can watch TV on my computer!!!!.....sometimes. MOST of the channels work fine. Some however (not the same ones consistently) either lock when I switch, or have no sound, and then when I switch again things go wrong. I have the EPG grab disabled. I cannot view fullscreen at all without locking the program or crashing my system. After a good solid MP lock, I have to fully reboot or the problem persists. I also have several channels listed that carry the same call signs (WNED) but then are followed by different 2 alpha characters that differ, and none of them seem to work, I just get a blank screen. Here is some info that might be useful.Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz (2 CPUs)Memory: 1022MB RAMPage File: 222MB used, 2237MB availableDirectX Version: DirectX 9.0c (4.09.0000.0904)DX Setup Parameters: Not found&nbsp;DxDiag Version: 5.03.2600.2180 32bit UnicodeCard name: NVIDIA GeForce 6800 Series GPUManufacturer: NVIDIAChip type: GeForce 6800 Series GPUDAC type: Integrated RAMDACDevice Key: Enum\PCI\VEN_10DE&amp;DEV_00F9&amp;SUBSYS_026D10DE&amp;REV_A2Display Memory: 256.0 MBCurrent Mode: 1024 x 768 (32 bit) (60Hz)Monitor: Dell M993sMonitor Max Res: 1600,1200Driver Name: nv4_disp.dllDriver Version: 6.14.0010.9371 (English)DDI Version: 9 (or higher)Driver Attributes: Final RetailDriver Date/Size: 10/22/2006 12:22:00, 4527488 bytesWHQL Logo'd: YesWHQL Date Stamp: n/aVDD: n/aMini VDD: nv4_mini.sysMini VDD Date: 10/22/2006 12:22:00, 3994624 bytesDescription: SB Audigy Audio [DCC0]Default Sound Playback: YesDefault Voice Playback: YesHardware ID: PCI\VEN_1102&amp;DEV_0004&amp;SUBSYS_10031102&amp;REV_04Manufacturer ID: 1Product ID: 100Type: WDMDriver Name: ctaud2k.sysDriver Version: 5.12.0001.0328 (English)Driver Attributes: Final RetailWHQL Logo'd: YesDate and Size: 3/26/2003 16:33:58, 498688 bytesAnd this is what I get for my ATSC card from Everest....[ Philips SAA7135HL Multimedia Capture Device ]Device Properties:&nbsp; &nbsp; &nbsp; Device Description&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Philips SAA7135HL Multimedia Capture&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Device&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; &nbsp; &nbsp; Bus Type&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; PCI&nbsp; &nbsp; &nbsp; Bus / Device / Function&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 4 / 2 / 0&nbsp; &nbsp; &nbsp; Device ID&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 1131-7133&nbsp; &nbsp; &nbsp; Subsystem ID&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 17DE-7350&nbsp; &nbsp; &nbsp; Device Class&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0480 (Multimedia Device)&nbsp; &nbsp; &nbsp; Revision&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; F0&nbsp; &nbsp; &nbsp; Fast Back-to-Back Transactions&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Supported, Disabled&nbsp; &nbsp; Device Features:&nbsp; &nbsp; &nbsp; 66 MHz Operation&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Not Supported&nbsp; &nbsp; &nbsp; Bus Mastering&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; EnabledNow I'm not expecting someone to just drop their lives and slave to give me all the worlds answers, but if there is a common problem by what I have given here I would be most appreciative. Otherwise at least a bit of a point at narrowing down the massive amount of materials to be read here would be great too. I would like to say &quot;Thanks!&quot; in advance for any and all help. I am trying to bring myself up to snuff on some of this tech stuff and the information in general.Scott<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite8" alt=":D" title="Big Grin&nbsp; &nbsp; :D" loading="lazy" data-shortname=":D" /></blockquote>

[QUOTE="Wolvyrine, post: 93430, member: 27179"] [b]kWorld ATSC110 card and questions[/b] Ok, I am an extreme noob when it comes to all this so please bear this in mind while reading. I have treid to browse though theese forums, but there is just SO much information, and to be honest theres so much of it I dont understand. I could be reading what I need to know, and not know thats what I need lol. So as to not take up too much more of your time here is the kernel of my issues. I went with MP after a heartbreaking and infuriating attempt with the BeyondTV3se that came with my card refused to do more than make me want to commit some form of violence against my computer. So far I am greatly impressed. I am having a few issues and am unsure as to what I can do to resolve them. I am using the afore mentioned card with a small HD antennae and a signal booster. I can watch TV on my computer!!!!.....sometimes. MOST of the channels work fine. Some however (not the same ones consistently) either lock when I switch, or have no sound, and then when I switch again things go wrong. I have the EPG grab disabled. I cannot view fullscreen at all without locking the program or crashing my system. After a good solid MP lock, I have to fully reboot or the problem persists. I also have several channels listed that carry the same call signs (WNED) but then are followed by different 2 alpha characters that differ, and none of them seem to work, I just get a blank screen. Here is some info that might be useful. Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519) Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz (2 CPUs) Memory: 1022MB RAM Page File: 222MB used, 2237MB available DirectX Version: DirectX 9.0c (4.09.0000.0904) DX Setup Parameters: Not found DxDiag Version: 5.03.2600.2180 32bit Unicode Card name: NVIDIA GeForce 6800 Series GPU Manufacturer: NVIDIA Chip type: GeForce 6800 Series GPU DAC type: Integrated RAMDAC Device Key: Enum\PCI\VEN_10DE&DEV_00F9&SUBSYS_026D10DE&REV_A2 Display Memory: 256.0 MB Current Mode: 1024 x 768 (32 bit) (60Hz) Monitor: Dell M993s Monitor Max Res: 1600,1200 Driver Name: nv4_disp.dll Driver Version: 6.14.0010.9371 (English) DDI Version: 9 (or higher) Driver Attributes: Final Retail Driver Date/Size: 10/22/2006 12:22:00, 4527488 bytes WHQL Logo'd: Yes WHQL Date Stamp: n/a VDD: n/a Mini VDD: nv4_mini.sys Mini VDD Date: 10/22/2006 12:22:00, 3994624 bytes Description: SB Audigy Audio [DCC0] Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: PCI\VEN_1102&DEV_0004&SUBSYS_10031102&REV_04 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: ctaud2k.sys Driver Version: 5.12.0001.0328 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 3/26/2003 16:33:58, 498688 bytes And this is what I get for my ATSC card from Everest.... [ Philips SAA7135HL Multimedia Capture Device ] Device Properties: Device Description Philips SAA7135HL Multimedia Capture Device Bus Type PCI Bus / Device / Function 4 / 2 / 0 Device ID 1131-7133 Subsystem ID 17DE-7350 Device Class 0480 (Multimedia Device) Revision F0 Fast Back-to-Back Transactions Supported, Disabled Device Features: 66 MHz Operation Not Supported Bus Mastering Enabled Now I'm not expecting someone to just drop their lives and slave to give me all the worlds answers, but if there is a common problem by what I have given here I would be most appreciative. Otherwise at least a bit of a point at narrowing down the massive amount of materials to be read here would be great too. I would like to say "Thanks!" in advance for any and all help. I am trying to bring myself up to snuff on some of this tech stuff and the information in general. Scott :thx: [/QUOTE]

Verification