Reply to thread

Message

<blockquote data-quote="kiwi_fella" data-source="post: 629647" data-attributes="member: 96279">Ok i'm stuck, am tryin gto get Optus D1 and Intelsat 2,5 at home, I have therequisite hardware thanks to a local installer. Mediaportal is an issue!!I'm running Athlon X64 3600 4GB DDR2 1TB storage, HVR3000 &amp; Nova-s PLus dvbs, Graphcs is Gigabyte 9400Gt. I've recently had a nice new 90cm dish installed with lnb's setup for Optus d1 and Intelsat2. In a normal set top box they work fine. Sat 1 NA Bandstacked DP Ku-Lo&nbsp; Focussed on -- 160 Degrees Optus D1&nbsp;&nbsp; low (LOF1) 11300 / High(LOF2) 11300 / LNBSW BlankSat 2 C-Band&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Focused On - 169 Degrees Inelsat 2,5&nbsp;&nbsp; low (LOF1) 5150 / High(LOF2) 5151 / LNBSW 22000The issue i'm getting is that i can get either LNB (And image) if i attach it to the 0Khz side of the tone switch, but as soon as i put it on the 22khz side it cannot be seen.&nbsp; I diverted away from the diseqcswitch as the Hauppauge cards dont suport Diseqc 2.0 (which most are these days).I do not have a universal LNB, i just went and got rid of that....And i have also removed the HVR3000 (as its hybrid) card while working on this to be certain thatits only the Nova-S Plus thats being registered. I live in Auckland and have a good line of site to the satellites etc, and it works in theSTB, so any ideas on what/where i shold be looking?Would be much appreciated. Thanks. &nbsp;B.</blockquote>

[QUOTE="kiwi_fella, post: 629647, member: 96279"] Ok i'm stuck, am tryin gto get Optus D1 and Intelsat 2,5 at home, I have therequisite hardware thanks to a local installer. Mediaportal is an issue!! I'm running Athlon X64 3600 4GB DDR2 1TB storage, HVR3000 & Nova-s PLus dvbs, Graphcs is Gigabyte 9400Gt. I've recently had a nice new 90cm dish installed with lnb's setup for Optus d1 and Intelsat2. In a normal set top box they work fine. Sat 1 NA Bandstacked DP Ku-Lo Focussed on -- 160 Degrees Optus D1 low (LOF1) 11300 / High(LOF2) 11300 / LNBSW Blank Sat 2 C-Band Focused On - 169 Degrees Inelsat 2,5 low (LOF1) 5150 / High(LOF2) 5151 / LNBSW 22000 The issue i'm getting is that i can get either LNB (And image) if i attach it to the 0Khz side of the tone switch, but as soon as i put it on the 22khz side it cannot be seen. I diverted away from the diseqcswitch as the Hauppauge cards dont suport Diseqc 2.0 (which most are these days). I do not have a universal LNB, i just went and got rid of that.... And i have also removed the HVR3000 (as its hybrid) card while working on this to be certain thatits only the Nova-S Plus thats being registered. I live in Auckland and have a good line of site to the satellites etc, and it works in theSTB, so any ideas on what/where i shold be looking? Would be much appreciated. Thanks. B. [/QUOTE]

Verification