MediaPortal 1 Talk (252 Viewers)

General talk regarding our HTPC-software MediaPortal 1 takes place here.
  • Sticky
Quite simply it has changed the way we watch media in our house, we have it running in several rooms and we quite honestly couldn't live without it. I bought a HTPC 4 years ago and MP was pre installed, after messing with it for a while i was hooked. Family and friends who see it are always impressed with the way it looks and...
Quite simply it has changed the way we watch media in our house, we have it running in several rooms and we quite honestly couldn't...
You may have noticed we are using our new slogan 'Everything else is just a media center' more often. The idea of this slogan was...
Replies
25
Views
38K
  • Sticky
Very nice - I think I'll use this one during my next "MP maintenance" day :P
Very nice - I think I'll use this one during my next "MP maintenance" day :P
Thought I'd try my hand at an MP wallpaper as most of the ones dotted around are out of date (old logos)... Then I thought that...
Replies
1
Views
12K
  • Locked
  • Sticky
Thx, I'll add these changes to SVN. For further updates please use the according forum section: EPG-Grabbers and tuningdetails - MediaPortal Forum
Thx, I'll add these changes to SVN. For further updates please use the according forum section: EPG-Grabbers and...
MediaPortal and the TV server both have a xml-file with tuningparameters for DVB-T. If the frequencies for your area are listed in...
Replies
66
Views
61K
MP1 MP2 Windscribe VPN (1 Viewer) DE
I have just installed Windscribe but it is blocking access to my TV Server. I get the following message "Please specify the IP address or Host Name of the Master TV Service". I have a single seat build running the latest X64 version of MP1. Can anyone point me to a solution please? It's probably a really obvious one..... Cheers Fangio
I have just installed Windscribe but it is blocking access to my TV Server. I get the following message "Please specify the IP...
I have just installed Windscribe but it is blocking access to my TV Server. I get the following message "Please specify the IP...
Replies
0
Views
22
I used the 32-bit version of MP on 32-bit Windows 7 for releases up to MP 1.31, performing an upgrade install for each successive release. I skipped MP 1.32 as it has some difficulties, due to being a mixture of 32-bit and 64-bit. I then installed 64-bit Windows 7 and performed a first-time install of 64-bit MP 1.33, which I am...
I used the 32-bit version of MP on 32-bit Windows 7 for releases up to MP 1.31, performing an upgrade install for each successive...
Hia all, So, decided to setup a new client instance and getting fed-up with the tonne of bloatware and cr*p that comes with...
Replies
3
Views
239
Does anyone else have problem with long (several hours) pauses of TV broadcasts? If I pause and forget, I can still resume TV the next day, but if I try to change channel or stop, MP freezes. Only way to fix is to restart both MP and TV Service. Sometimes I need to restart PC It seems that TVServer cannot proprtly handle large...
Does anyone else have problem with long (several hours) pauses of TV broadcasts? If I pause and forget, I can still resume TV the...
Does anyone else have problem with long (several hours) pauses of TV broadcasts? If I pause and forget, I can still resume TV the...
Replies
0
Views
156
I am still unable to get the 3D playback of inserted disks but otherwise eveything seems to be working well using a paid version of MakMKV on my HTPC. However I tried doing the same with the latest beta evaluation version of MakMKV on my Desktop PC, also MP 1.34 x64, but have not been able to get it working, "Unable to play copy...
I am still unable to get the 3D playback of inserted disks but otherwise eveything seems to be working well using a paid version of...
I don't know how many of you are aware of this, however, it may be that AnyDVD HD has finally come to an end. Their web site can no...
Replies
11
Views
2K
On the assumption you are using an OTA/Cable or Sat tuner then no internet connection is required for live TV recordings. BUT only if you already have Media Portal fully installed and functional. For all practical purposes you will need an internet connection to get Media Portal properly installed on a PC! Yes.
On the assumption you are using an OTA/Cable or Sat tuner then no internet connection is required for live TV recordings. BUT only...
is media portal a standalone or is internet connection required for live TV recordings? after scheduling a program will the PC turn...
Replies
1
Views
385
MP1 MP2 Maria DB instead of MySQL (1 Viewer) DE
Correction. Version is 11.2.2 was installed, but since upgraded to 11.3.2.
Correction. Version is 11.2.2 was installed, but since upgraded to 11.3.2.
Hi, I wanted to share that I've moved from MySQL to Maria DB for MediaPortal and all seems fine. MySQL is owned by Oracle. Maria...
Replies
29
Views
4K
MP1 MP2 1.31.0 Cannot view Changelog anymore (1 Viewer) DE
Hi all, I don't frequently update my MediaPortal and before seeing if it's really useful I used to browse the Changelog to determine if this update is necessary for my system or not. Today I wanted to check the Changelog for version 1.34 (1.31 installed on my system) and I was asked for a “Jira” login. I tried to use the same one as...
Hi all, I don't frequently update my MediaPortal and before seeing if it's really useful I used to browse the Changelog to...
Hi all, I don't frequently update my MediaPortal and before seeing if it's really useful I used to browse the Changelog to...
Replies
0
Views
359
MP1 MP2 Smart TV DE
Need the app on Tizen platform for samsung TV's
Need the app on Tizen platform for samsung TV's
Hi all, new to Media Portal and so far loving it. Not sure if the question has been asked before, though is there an app or way...
Replies
4
Views
6K
Hej. Ingemar i Abbekås här. Jag skulle vilja lyssna på Radio Trelleborg igen via Screamer Radio version 0.4.4. men får inte till det. Kan någon här hjälpa mig?
Hej. Ingemar i Abbekås här. Jag skulle vilja lyssna på Radio Trelleborg igen via Screamer Radio version 0.4.4. men får inte till...
Hi all. New user on this forum and I am happy I found MediaPortal :D Didnt find any good list for Swedish radio so i made 4...
Replies
16
Views
20K
Yes, you are correct in that ATSC 3.0 is still evolving in the US. However, I tend to not give too much credit to predictions that of the sort that say all ATSC 3.0 stations will eventually be encrypted. There are many broadcasters out there that I doubt will ever adopt encryption for their broadcasts. In particular, Public...
Yes, you are correct in that ATSC 3.0 is still evolving in the US. However, I tend to not give too much credit to predictions that...
I recently purchased an HDHomeRun FLEX 4K (Model: HDFX-4K). Related, I live near Toronto (Canada), and I can capture over-the-air...
Replies
24
Views
7K
The problem with MP 1.32 was that the TV Server component was still 32-bit, even when you installed the 64-bit version of the MP client. MP 1.33 will have 32-bit and 64-bit versions of both the MP client and TV Server. My understanding is that it will not be possible to perform an upgrade install from a 64-bit client + 32-bit TV...
The problem with MP 1.32 was that the TV Server component was still 32-bit, even when you installed the 64-bit version of the MP...
This is on a windows 11 latest rev OS: This particular component has been very frustrating. I'm a new potential user, trying to...
Replies
7
Views
1K
I need to try MadVR, I hope my Intel NAC can manage it.
I need to try MadVR, I hope my Intel NAC can manage it.
Remember PAL DVDs of US movies and TV Shows, and how they were converted to 25 fps thus introducing a "smurf lite" pitch on the...
Replies
2
Views
601
Are you trying to use a remote control or a keyboard? You can customise your input devices using the "Remotes and Other Input Devices" section in "MP Config". Using the "HID" tab, you can: Customise your remote control, and/or Customise your keyboard. Select one or both devices, and then pick the config that you are going to use...
Are you trying to use a remote control or a keyboard? You can customise your input devices using the "Remotes and Other Input...
Is there some way to change the raw mapping of the windows media center remote? With Hid Demo I find that the 'stop' button...
Replies
1
Views
471
I'm using MP1 Ukraine ( as a side issue Trend antivirus says later versions are ransomwear ) and I've used MP for many years. Have I missed something all this time? Is there a way of marking recordings as favourites, and an easy way to display them? Thank you
I'm using MP1 Ukraine ( as a side issue Trend antivirus says later versions are ransomwear ) and I've used MP for many years. Have...
I'm using MP1 Ukraine ( as a side issue Trend antivirus says later versions are ransomwear ) and I've used MP for many years. Have...
Replies
0
Views
623
So far I have installed an MP1 server and MP1 clients. Now I want to connect a Raspi to the MP server. Is there a HowTO for this? I installed the MPserverKodi plugin, shared the corresponding directories, and activated smb under Windows. Nevertheless, Kodi remains with the message 'PVR Manager is being tested: 0%
So far I have installed an MP1 server and MP1 clients. Now I want to connect a Raspi to the MP server. Is there a HowTO for this? I...
So far I have installed an MP1 server and MP1 clients. Now I want to connect a Raspi to the MP server. Is there a HowTO for this? I...
Replies
0
Views
556
It works perfect now. All channels have been found, even with the default tuning files. Thank you very much! (y) I'd love seing this change in MP 1.33! :)
It works perfect now. All channels have been found, even with the default tuning files. Thank you very much! (y) I'd love seing...
With my new hardware, Windows 11 and MP 1.32 the TV channel scan is not working anymore. The frequencies are scanned but no...
Replies
40
Views
4K
Works, all error messages are gone now! (y)
Works, all error messages are gone now! (y)
MediaPortal-Error.log entries on every MediaPortal start: [2023-12-01 22:16:40,628] [Error ] [MPMain ] [ERROR] -...
Replies
3
Views
894
Right, this solved this issue. I added my comment to this thread. Thank you very much!
Right, this solved this issue. I added my comment to this thread. Thank you very much!
Until MP 1.31 I was able to change the Videos home screen button to Moving Pictures: MediaPortal Configuration -> GUI -> Skin ->...
Replies
2
Views
797
I had the same issue and found the executable under C:\ProgramData\Team MediaPortal\MediaPortal\skin\Titan\BasicHome.Editor\TitanEditor.exe Only the shortcut was missing.
I had the same issue and found the executable under C:\ProgramData\Team...
Hi all, Not a rant, more a sharing of experience (maybe hoping to get some clarification on which wrong turn I took) It has been...
Replies
9
Views
2K
Thanks for your reply. In my configuration this setting is set to "no". To avoid misunderstandings, the MP window size changes on screen resolution changes, MP always fulfills the whole screen. Also, the home screen buttons size is adjusted. Only the font size is not adjusted to the new screen resolution.
Thanks for your reply. In my configuration this setting is set to "no". To avoid misunderstandings, the MP window size changes on...
I use two monitors - a large display for TV and video watching and a small display for music playback, to get the current track...
Replies
2
Views
910
Yup....I've always set it to shares :) .....and just to repeat....all good in 1.30...!
Yup....I've always set it to shares :) .....and just to repeat....all good in 1.30...!
Have used MP1 for some years now....and without problems :) Problem now....is that I can see my Video folders....but they won't...
Replies
12
Views
2K
MP1 MP2 4K makes Problems. DE
Hello, one question your hdmi port from motherboard is HDMI2.0 at least ?
Hello, one question your hdmi port from motherboard is HDMI2.0 at least ?
Hey, i am using the newest MP version and have some problems playing 4k Movies. The color saturation is too low and the contrast is...
Replies
9
Views
2K
Well, despite disabling ipv6, I can still see the error this morning. I guess the errors are random, no worries. I did a search for "genaservercontroller" and got 2 hits that reference Mediaportal 2 on Github. The linked items are from long ago, 12 years or so. Google-Results-Here
Well, despite disabling ipv6, I can still see the error this morning. I guess the errors are random, no worries. I did a search...
I just finished up reinstalling MP today to 1.31 and noticed these two errors in the TVService.log [2023-08-20 08:11:24,628] [Log...
Replies
3
Views
923
I have set VLC as external Player and set buffer there
I have set VLC as external Player and set buffer there
Is it possible to set buffer size for video rendering ? I play videos via WLAN & Samba and it loads every 5 seconds 2 MB. I want to...
Replies
1
Views
667
Hey, thanks for sharing your experience and the settings you changed to get your Mediaportal PCs working on both Windows 10 and 11! It's always helpful to hear about these kinds of solutions, especially when there isn't much discussion around the issue. I'm not the most tech-savvy person, but I'll definitely keep your tips in mind if...
Hey, thanks for sharing your experience and the settings you changed to get your Mediaportal PCs working on both Windows 10 and 11...
I upgraded my Mediaportal PC (Server and Client) to Windows 11 to solve some driver issues as it was new hardware. Then I...
Replies
2
Views
2K
Ok some good news after much tearing out of hair lol as i refuse to be beaten at problem solving i managed to find out where EPG Collector gets its epg from and found it gets it from 'freesathome' so cribbed the settings from that and added the freesathome channel to the radio channels and selected that channel only to collect epg...
Ok some good news after much tearing out of hair lol as i refuse to be beaten at problem solving i managed to find out where EPG...
Hi folks Ive just started using epg collector to import uk freesat epg into mediaportal i have had good success with it so far and...
Replies
7
Views
2K
Old post I know but i used mediaportal back in 2012 to record the Queens Jubilee using a usb freeview dongle, was really impressed by it features, for some reason i stopped using my usbtv and recording live tv i guess life got in the way so didn't bother again until now, i just bought a TBS6920 pcie card for my new pc build so i could...
Old post I know but i used mediaportal back in 2012 to record the Queens Jubilee using a usb freeview dongle, was really impressed...
Hi everybody, after 15+ years of using MediaPortal, I gave Kodi with an VDR backend a try as I wanted to switch from Windows...
Replies
2
Views
2K
That was it! :) I had to set it to "Maintain display scaling". I think it was set to "Maintain Aspect Ratio", which added black bars to MediaPortal when playing videos that didn't conform to a strict 16:9 ratio, I suppose. Thanks to everyone for the patience and help, I can finally enjoy videos fully.
That was it! :) I had to set it to "Maintain display scaling". I think it was set to "Maintain Aspect Ratio", which added black...
I'm running MePo in 1080p to my 4K TV (because my Intel NUC HTPC ain't powerful enough to run in 4K) and for some videos, I see...
Replies
12
Views
2K
MP1 MP2 1.27.0 Memory leak in TVService (1 Viewer) DE
A WORK AROUND !!! Hello to everyone again. I too was experiencing these problems. I was using 1.25v of MP with 32 gigs of memory, win7. The reason why it occurs is due to the the number of files scheduled to be recorded. Solution:- Check the number of scheduled recordings (and scheduled series to be recorded) and reduce them...
A WORK AROUND !!! Hello to everyone again. I too was experiencing these problems. I was using 1.25v of MP with 32 gigs of memory...
There appears to be a memory leak in TvService.exe of about 15KB per hour. After restarting my system (W10, MP 1.27) Windows task...
Replies
43
Views
10K
Happy new years too :)
Happy new years too :)
First, Happy new year to you ! Best wishes to you! :) Usually, a new version of MP is released at the end of the year. What's...
Replies
2
Views
2K
Top Bottom