[confirm] CAM Support Problem (2 Viewers)

[ramu]

Hi mm,

here is the screenshoot from the menu I belive the dropdown field should be in??

Perhaps the update got wrong...

ramu

 

[mm1352000]

Hello again ramu

Yes, you're in the right place - there should be quite a few differences, not just the "idle mode".
So I think the update went wrong.
Can you try again?
Please make sure that the TV service is stopped before installing.

mm

 

[ramu]

Hi mm,

so I updated MP but now TV scan causes problems. DVB-T finds no channels and DVB-S stops scanning after the 20th channel???

Also I belive TV Server didn't starts when windows is coming up...

Have a look an screenshots and log, please. There was an error exporting the logs. (see file) so I could only export the following logs..


ramu

 

[mm1352000]

Hello again

so I updated MP but now TV scan causes problems. DVB-T finds no channels...

Known issue - sorry should have warned you.
The fix is quite easy: edit the tuning detail file and change "BandWidth" to "Bandwidth".

and DVB-S stops scanning after the 20th channel???

I really need the tv.log file to understand what is happening with this.

1. Open TV Server configuration.
2. Click "open log directory" in the top left corner.
3. Zip up all the files you find there and post the zip file here.

Also I belive TV Server didn't starts when windows is coming up...

This is unusual. I will check the logs.
Please check the service configuration (start, run services.msc, look for "TVService") is set to automatic.

mm

 

[ramu]

Hi mm,

sorry about that threat, there are a lot of problems coming up. Some of them are allready discussion here, without any fixing..

So here is my first report of last nights work.

ramu

DVB-T Scanning
so after changing tunerdetails and restarting tv service twice (first there was an meomory error) I got dvb-t tuning running. I choose Berlin_Brandenburg and there are some frequences wrong:

1. Start


2.Start
Later I got errors scaning the 1., 2., 9., and 11th frequence.
So frequences have changed here: Have a look to http://www.mabb.de/digitale-welt/dvb-t/programme.html

So I scaned a second time with all germany:
Missing are 682000 and 754000 KHz

So I tried to scan one singel frequence -> MP crashes!

In between the TV Server and/or TV setup crashed. I had to restart Service before TV-Setup

By the way: In former versions there was all the time the signal and quality bar from tuner visible. Now there is only a bar when the right frequence is being scand. This is confusing because I usalyy thing there is anything wrong with the dvb-T card. For DVB-S scanning MP displays the bars all the time!

DVB-S Scanning
After the 11th channel MP Setup (Setup and Service) crashes!

TV-Server startup
I checked services in windows. TV Server was on not on automatic start. I checked that option to automatic. Don't know why. Must happend at reinstall. Before the old version was running in automatic mode.

Error in gentle config
In this version there is still the error discribed in
https://forum.team-mediaportal.com/...nnection-from-client-after-new-install.96141/
There should be the name of the server inside otherwise cliens won't find the databse on the server


MP probelm comes from an error in handling the installoption use existing databse. I believe there is no update in gentle.config with the real name aof db server..

Getting logfiles by Export logs out from MP debug


This error occurs.

I've attached the logs manually..



Error after clicking on trayicon
When opening Client in window modus and swiching applications by alt-tab MP vanishes in tray. After clicking tray icon a full black screen appears, no text. So I have to kill MP Client[DOUBLEPOST=1350132395][/DOUBLEPOST]Sorry images disapear, see attched files...

 

[ramu]

So the next DVB-S scan stops at channel 28. After that there is no signal and no channel found???

 

[mm1352000]

Hello again ramu

DVB-T Scanning

I choose Berlin_Brandenburg and there are some frequences wrong...
So frequences have changed here: Have a look to http://www.mabb.de/digitale-welt/dvb-t/programme.html

I have committed these changes.
Normally you can submit changes here:
https://forum.team-mediaportal.com/forums/submit-epg-grabbers-and-tuningdetails.296/

Later I got errors scaning the 1., 2., 9., and 11th frequence.

According to the link, those frequencies are not used so it should be expected to get "no signal". This is not always an error.

So I tried to scan one singel frequence -> MP crashes!

I'm sorry I can't see where this happened.

By the way: In former versions there was all the time the signal and quality bar from tuner visible. Now there is only a bar when the right frequence is being scand. This is confusing because I usalyy thing there is anything wrong with the dvb-T card. For DVB-S scanning MP displays the bars all the time!

I have not intentionally changed anything here. We show what the tuner reports.
When the wrong frequency is scanned I would expect to not see bars.

DVB-S Scanning

After the 11th channel MP Setup (Setup and Service) crashes!

I'm still looking into this problem.

TV-Server startup

I checked services in windows. TV Server was on not on automatic start. I checked that option to automatic. Don't know why. Must happend at reinstall. Before the old version was running in automatic mode.

I have not changed this.

Error in gentle config

In this version there is still the error discribed in
https://forum.team-mediaportal.com/...nnection-from-client-after-new-install.96141/
There should be the name of the server inside otherwise cliens won't find the databse on the server

It is not my goal to fix all issues in this branch. The focus is on better hardware support.

However...
It seems that this problem may occur under very specific conditions:

1. Clean software install.
2. An old MySQL MP database exists that happens to use the default schema name, user name and password.

Normally the default gentle.config file is expected to be replaced, however in this situation the default gentle.config file (which uses localhost as server name) will allow successful connection to the DB without asking for DB configuration.
Default connection string is:

<DefaultProvider name="MySQL" connectionString="Server=localhost;Database=MpTvDb;User ID=root;Password=MediaPortal;charset=utf8;Connection Timeout=300;" />

MP probelm comes from an error in handling the installoption use existing databse. I believe there is no update in gentle.config with the real name aof db server..

But you did not get the chance to enter the real server name. Correct?

Getting logfiles by Export logs out from MP debug

This error occurs.

I've attached the logs manually..

This is because you don't have a MediaPortal.xml configuration file.
Please run MP or MP configuration to create the configuration, then you can use the watchdog.

Error after clicking on trayicon
When opening Client in window modus and swiching applications by alt-tab MP vanishes in tray. After clicking tray icon a full black screen appears, no text. So I have to kill MP Client

I didn't make any changes in this area.
I can deal with the TV Server problems related to hardware.
Other problems that are also in the normal versions of MP should be reported separately.

mm

 

[ramu]

Hi mm,

So manual scanning of the missing DVB-T channels went well. Don't know why..

But scanning of DVB-S crashes...Log is telling

2012-10-13 20:34:33.093750 [DVB-S scan thread(7)]: Exception ystem.Net.Sockets.SocketException: Eine vorhandene Verbindung wurde vom Remotehost geschlossen

Server stack trace:
bei System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
bei System.Runtime.Remoting.Channels.SocketStream.Read(Byte[] buffer, Int32 offset, Int32 size)
bei System.Runtime.Remoting.Channels.SocketHandler.ReadFromSocket(Byte[] buffer, Int32 offset, Int32 count)
bei System.Runtime.Remoting.Channels.SocketHandler.Read(Byte[] buffer, Int32 offset, Int32 count)
bei System.Runtime.Remoting.Channels.SocketHandler.ReadAndMatchFourBytes(Byte[] buffer)
bei System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadAndMatchPreamble()
bei System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadVersionAndOperation(UInt16& operation)
bei System.Runtime.Remoting.Channels.Tcp.TcpClientSocketHandler.ReadHeaders()
bei System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
bei System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)

Exception rethrown at [0]:
bei System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
bei System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
bei TvControl.IController.Scan(Int32 cardId, IChannel channel)
bei SetupTv.Sections.CardDvbS.Scan(Int32 lnb, LnbType lnbType, DiseqcPort diseqc, SatelliteContext context)
bei SetupTv.Sections.CardDvbS.DoScan()

Scanning bars

By the way: In former versions there was all the time the signal and quality bar from tuner visible. Now there is only a bar when the right frequence is being scand. This is confusing because I usalyy thing there is anything wrong with the dvb-T card. For DVB-S scanning MP displays the bars all the time!​

I have not intentionally changed anything here. We show what the tuner reports.
When the wrong frequency is scanned I would expect to not see bars.

Ok, it's since a longer time. I think it should be the appeares als DVB-S scanning. Unfortunatelly I'm not able to test DVB-S scanning without the right frequence jet, because it crashes. But I remeber starting DVB-S scanning the bars are displaed at the beginning, at DVB-T they appear later, when a right freqeuncy is been found...

Gentle config

But you did not get the chance to enter the real server name. Correct?

You are right. It's about 4-5 versions ago that this windows at install vanished. So in earlier times I've been asked if DB connection is right. Now this windows and so the DB config will never corrected... Can You please fix the behavier?

So I chanced gente.config in TV Server directory and it is transfered to the MP client. But I didn't manage to get MP client running. The typical error is comming up. Did I insert the IP wrong?

<DefaultProvider name="MySQL" connectionString="Server=53.2.172.210;Database=MpTvDb;User ID=root;Password=MediaPortal;charset=utf8;Connection Timeout=30;" />

Entering IP Adress in MP Client
In Your Test version I only get a phone like keyboard, so I can't use the normal computer keyboard to enter the ip??? Wounl'd You please go back to the older version where the normal keybard works?

ramu

 

[ramu]

Update.

I had a look into the client log. It seams to me, that MP Clients gets into contact to database but after clicking on tv programms the window to chance server name/ip comes up. After insering the right IP I get the attached error message attached above??

The log tells that MP client had found 330 channels?

2012-10-13 21:09:51.408242 [Info.][MPMain(1)]: Main: Starting up
2012-10-13 21:09:51.412242 [Info.][MPMain(1)]: PlugInManager.Load()
2012-10-13 21:09:51.419242 [Info.][MPMain(1)]: Load plugins from : C:\Program Files\Team MediaPortal\MediaPortal\Plugins\process\ProcessPlugins.dll
2012-10-13 21:09:51.426243 [Info.][MPMain(1)]: File Version : 1.2.100.0
2012-10-13 21:09:51.445244 [Info.][MPMain(1)]: PlugInManager.Start()
2012-10-13 21:09:51.459245 [Info.][BassAudio(12)]: BASS: Initialize BASS environment ...
2012-10-13 21:09:51.654256 [Info.][FilterChecker(5)]: FilterChecker: Found TsReader.ax from 12.06.2012 located at C:\Program Files\Team MediaPortal\MediaPortal\TsReader.ax
2012-10-13 21:09:52.160285 [Info.][MPMain(1)]: Main: Initializing volume handler
2012-10-13 21:09:52.201287 [Info.][MPMain(1)]: GUIMusicPlaylist: Default Playlist loaded
2012-10-13 21:09:52.212288 [Info.][MPMain(1)]: Visualization Window: Loading skin settings...
2012-10-13 21:09:52.221288 [Info.][BassAudio(12)]: BASS: Loading audio decoder add-ins...
2012-10-13 21:09:52.237289 [Info.][BassAudio(12)]: BASS: Loaded 10 Audio Decoders.
2012-10-13 21:09:52.461302 [Info.][BassAudio(12)]: BASS: Initializing BASS environment done.
2012-10-13 21:09:53.540364 [Info.][FilterChecker(5)]: FilterChecker: Found quartz.dll from 26.10.2011 located at C:\Windows\system32\quartz.dll
2012-10-13 21:09:53.543364 [Info.][FilterChecker(5)]: FilterChecker: Version of installed quartz.dll: 6.6.7600.16385
2012-10-13 21:09:56.215517 [Info.][MPMain(1)]: TVHome:OnPageLoad
2012-10-13 21:09:56.237518 [Info.][MPMain(1)]: ChannelNavigator::Reload()
2012-10-13 21:09:56.240518 [Info.][MPMain(1)]: get channels from database
2012-10-13 21:09:56.532535 [Info.][MPMain(1)]: found:333 tv channels
2012-10-13 21:09:56.534535 [Info.][MPMain(1)]: TvNotify:OnNotifiesChanged
2012-10-13 21:09:56.898556 [Info.][MPMain(1)]: Done.
2012-10-13 21:09:56.901556 [Info.][MPMain(1)]: get all groups from database
2012-10-13 21:09:57.242575 [Info.][MPMain(1)]: loaded 1 tv groups
2012-10-13 21:09:57.245576 [Info.][MPMain(1)]: tv home initas Erste
2012-10-13 21:09:57.247576 [Info.][MPMain(1)]: tv home initas Erste done
2012-10-13 21:09:57.762605 [Info.][MPMain(1)]: TexturePacker: Loaded C:\ProgramData\Team MediaPortal\MediaPortal\Cache\DefaultWide\packedgfx25.png texture:2048x2048 miplevels:1
2012-10-13 21:09:57.764605 [Info.][MPMain(1)]: TexturePacker: fontengine add texure:1992
2012-10-13 21:10:10.570338 [Info.][MPMain(1)]: TvNotify:LoadNotifies
2012-10-13 21:10:10.588339 [Info.][MPMain(1)]: TvNotify: 0 notifies
2012-10-13 21:10:44.511279 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\stdKeyboard.xml' is missing control id 2 (window property: _background)
2012-10-13 21:10:44.516279 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\stdKeyboard.xml' is missing control id 2 (window property: _background)
2012-10-13 21:10:50.625629 [Info.][MPMain(1)]: ChannelNavigator::Reload()
2012-10-13 21:10:50.991650 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\dialogOK.xml' is missing control id 11 (window property: btnYes)
2012-10-13 21:16:47.819059 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\stdKeyboard.xml' is missing control id 2 (window property: _background)
2012-10-13 21:16:47.824059 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\stdKeyboard.xml' is missing control id 2 (window property: _background)
2012-10-13 21:16:51.459267 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\myHome.xml' is missing control id 200 (window property: lblDate)
2012-10-13 21:16:51.462267 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\myHome.xml' is missing control id 201 (window property: lblTime)
2012-10-13 21:16:51.466268 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\myHome.xml' is missing control id 99 (window property: videoWindow)
2012-10-13 21:16:58.256656 [Info.][MPMain(1)]: TVHome:OnPageLoad
2012-10-13 21:16:58.269657 [Info.][MPMain(1)]: tv home initas Erste
2012-10-13 21:16:58.273657 [Info.][MPMain(1)]: tv home initas Erste done
2012-10-13 21:17:13.938553 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\myHome.xml' is missing control id 200 (window property: lblDate)
2012-10-13 21:17:13.941553 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\myHome.xml' is missing control id 201 (window property: lblTime)
2012-10-13 21:17:13.944553 [Warn.][MPMain(1)]: GUIWindow:OnWindowLoaded: 'C:\ProgramData\Team MediaPortal\MediaPortal\Skin\DefaultWide\myHome.xml' is missing control id 99 (window property: videoWindow)

 

[mm1352000]

But scanning of DVB-S crashes...Log is telling

Still checking this.

Scanning bars

I misunderstood what you meant. Please try the attached SetupTv.exe. I hope it will be compatible, but remember to take a backup of the current one just in case.

Gentle config

You are right. It's about 4-5 versions ago that this windows at install vanished. So in earlier times I've been asked if DB connection is right. Now this windows and so the DB config will never corrected... Can You please fix the behavier?

I'm not 100% certain that I have found the problem, but I have reported it internally. We will see if the team agrees with what I think...

So I chanced gente.config in TV Server directory and it is transfered to the MP client. But I didn't manage to get MP client running. The typical error is comming up. Did I insert the IP wrong?

The IP is okay so the DB connection should work, but did you configure the IP address for the server in MP configuration?
http://wiki.team-mediaportal.com/MediaPortal/Configuration/Television/TVClient

Entering IP Adress in MP Client

In Your Test version I only get a phone like keyboard, so I can't use the normal computer keyboard to enter the ip??? Wounl'd You please go back to the older version where the normal keybard works?

I didn't change this. It could be a new feature in MP 1.3 alpha. Sorry, I can't go back.

mm