Completed Completed Silverstone CW-02 (1 Viewer)

PVRJunky

MP Donator
  • Premium Supporter
  • November 19, 2007
    16
    0
    Hi there,

    I finally completed my HTPC. Hier are the Specs:

    Case: Silverstone CW02 with iMon Frontview
    Pro: Intel Core 2 Duo E6750 So775 BOX
    Moth.B: Gigabyte GA-X38T-DQ6, X38
    Power: Seasonic S12II-430 430W ATX 2.0 Rev. 2
    RAM: Corsair XMS3 KIT 2048MB PC3-10667U CL9 DDR3-1333
    Drive 1: Seagate Barracuda 7200.10 250GB SATAII ST3250410AS
    Drive 2: Older 500 GB HITACHI
    opt. Dri: LG GGW-H10NRB for Blueray reading+writing an HDDVD reading
    Graphics: HIS 256MB 2600XT iSilenceIII GDDR3 PCIe (no Fan)
    CPU-Cool: Scythe Mugen with 1 Scythe S-FLEX 800rpm 120 mm
    Case-Fan: Scythe S-FLEX 800rpm 120 mm
    Remote: Logitech Harmony 555
    Keyb: Logitech Bluetooth Keyboard MX something (older)
    TV-Card: FireDTV Cable

    Software:
    Microsoft Windows XP Media Center 2005
    MediaPortal
    Cyberling PowerDVD Ultra
    FDDShow

    Building: Because of the high and big case, buliding was quite easy. (Only the huge CPU-Cooler always gives me some trouble.) The case provides high quality. Although the price is far too high. I took the case, because it fits into my cabinet and I wanted the big 120mm Fans for a noiseless HTPC.

    The case fan is right next to the CPU-cooler. The speed of the system-fan changes between 500 and 800 rpm depending on the temperature of the system. The airflow of the systemfan also washs around the cpu-cooler, therefore the fan of the cooler is only runnin once in a while.

    The only noise, if we can talk about "noise", is coming from the harddisk-drives. The "Suspend vibration dampening hard drive cage" of the expensive case is not really working. I am thinking of hanging the harddrives loose between rubbers. Enough space would be there. In the second step I am thinking of building in only one notebook harddrive and putting a NAS in the cellar which is connected with a 1GB LAN.

    The optical combined HD/BD drive works great. The graphics card works perfektly together with my Toshi TV. If I watch HD I force the graphics card to 24Hz. If I watch TV I put it back to 50Hz. This is done by the Harmony 555 which also works great over the iMon tool together with MediaPortal.

    So overall I am quite happy with the setup.

    But one thing is annoying me. I can't control the system fan. And non of the tools like speedfan or the gigabyte tools are working. But the good thing: Since I can't here the Scythe 120mm Fan even if it is running with 120rpm. I don't have a problem. But i would like to have that thing under my control.....

    Comments are welcome. :D
     

    PVRJunky

    MP Donator
  • Premium Supporter
  • November 19, 2007
    16
    0
    Here are some pics. I did'nt clean up the cables yet and you can see the yellow tape, which I placed there to close the right opening, so that the air has to come in from the left side. By the way turnig the direction of the system-fan from outside in to inside out lowered the system temperatur by 10°C.

    IMG_6721n.jpg

    IMG_6726n.jpg

    IMG_6727n.jpg
     

    PVRJunky

    MP Donator
  • Premium Supporter
  • November 19, 2007
    16
    0
    While watching a TV-recording, the CPU slows down to 2000Mhz
    Then I have the following temperatures after 4 hours of running:

    System 45°C and CPU 29°C with the system fan running at 535 rpm and the CPU-Fan not running.

    If I will watch a HD-Movie I will look at the temperatures again and report.

    The case is standing free a on the picture. The case is closed.

    When its in the cabinet, I hope there will not be too much of a change.
     

    Rickler

    Portal Member
    December 11, 2007
    7
    0
    Home Country
    United States of America United States of America
    Does that plastic crap on the front sides come off? What is the point of putting plastic over aluminum?
     

    PVRJunky

    MP Donator
  • Premium Supporter
  • November 19, 2007
    16
    0
    What do you mean? There is no plastic. It's all aluminium. I guess, it's supposed to be beautiful design.
     

    Users who are viewing this thread

    Top Bottom