B
basti_s89
Guest
TV-Server Version: RC1
MediaPortal Version: RC1
MediaPortal Skin: Bluetwo
Windows Version: XP SP3
CPU Type: Celeron Duo 2,0GhZ
HDD: 2x60GB
Memory: 2GB DDR2 667
Motherboard: Asus P5 N HDMI
Video Card: nVidia Geforce 8500GT
Video Card Driver: newest
Sound Card: onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: Terratec Cinergy S PCI
1. TV Card Type: DVB-S
1. TV Card Driver: 1.0.2.9
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
Hi Guys,
I'm tracing this forum since a long long time.
I had many different Problems with my TV-Card the Terratec Cinergy-S PCI.
I solved them with your help. So first: THANKS @ u all.
My problem I have in the last time is much difficulter than I thaught.
In the configuration of the TV-Server, specially at the LNB-Setup I have a Problem:
The DiSEqC,Band and Satellite configuration is right, but I haven't found any Channels. (But with other tools I did, so the TV-Card works)
After a long time playing with the Settings of LOF1,LOF2 and LNBSW I had the best signal i could have and I found EVERY Channel above 600.
The settings are: LOF1:9750MHZ LOF2:10600MHZ and LNBSW: <--means blankfield
But now when I try to watch TV or watch the Preview, an Error appears: Unknown Error.
I found out that the TV-Server needs an entry for LNBSW otherwise there is an error.
But any other settings for LNBSW destroys the search results and the signal is as bad as before and I'am not able to watch any Channel.
I have a HAMA LYPSI QUAD LNB with an external 5/4 Multiswitch.
The informations at the LNB are not very detailed, but I found one setting: Switchfrequency High-Low-Band 22kHz
But even if I try to configure this settings for the LNBSW I get no Signal on no transponder.
So can anyone tell me what is the right setting for me?
I forgot to tell that I just use the HIGH-Band (because from LNB to Switch are only 2 cable^^)
I hope you can help me,
Kind Regards,
basti
MediaPortal Version: RC1
MediaPortal Skin: Bluetwo
Windows Version: XP SP3
CPU Type: Celeron Duo 2,0GhZ
HDD: 2x60GB
Memory: 2GB DDR2 667
Motherboard: Asus P5 N HDMI
Video Card: nVidia Geforce 8500GT
Video Card Driver: newest
Sound Card: onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: Terratec Cinergy S PCI
1. TV Card Type: DVB-S
1. TV Card Driver: 1.0.2.9
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
Hi Guys,
I'm tracing this forum since a long long time.
I had many different Problems with my TV-Card the Terratec Cinergy-S PCI.
I solved them with your help. So first: THANKS @ u all.
My problem I have in the last time is much difficulter than I thaught.
In the configuration of the TV-Server, specially at the LNB-Setup I have a Problem:
The DiSEqC,Band and Satellite configuration is right, but I haven't found any Channels. (But with other tools I did, so the TV-Card works)
After a long time playing with the Settings of LOF1,LOF2 and LNBSW I had the best signal i could have and I found EVERY Channel above 600.
The settings are: LOF1:9750MHZ LOF2:10600MHZ and LNBSW: <--means blankfield
But now when I try to watch TV or watch the Preview, an Error appears: Unknown Error.
I found out that the TV-Server needs an entry for LNBSW otherwise there is an error.
But any other settings for LNBSW destroys the search results and the signal is as bad as before and I'am not able to watch any Channel.
I have a HAMA LYPSI QUAD LNB with an external 5/4 Multiswitch.
The informations at the LNB are not very detailed, but I found one setting: Switchfrequency High-Low-Band 22kHz
But even if I try to configure this settings for the LNBSW I get no Signal on no transponder.
So can anyone tell me what is the right setting for me?
I forgot to tell that I just use the HIGH-Band (because from LNB to Switch are only 2 cable^^)
I hope you can help me,
Kind Regards,
basti