Reply to thread

Message

<blockquote data-quote="mm1352000" data-source="post: 1037709" data-attributes="member: 82144">Chris, TV Server doesn't just use any available tuners. You have to somehow indicate that a given tuner is capable of tuning a given channel. That is what mapping does:<a href="http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/03_TV_Channels/2_Mapping" target="_blank">http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/03_TV_Channels/2_Mapping</a>If you don't do that, TV Server absolutely won't use a tuner.Channels are automatically mapped to a tuner when the tuner scans them in. Otherwise the mapping usually has to be done manually. I guess it is possible that DJBlu modified this in his version, however...From a glance at the logs, I think you're on the wrong track. I see the 20 second delay, but it comes after TV Server reports having successfully tuned the channel.Tuning:So, the problem is client side. There is very little code between those two entries. As I recall, this is typical of what sometimes happens when IPv6 is enabled. Please disable the IPv6 protocol on your network adaptors and see if it makes any difference.I note: your setup is now at the point where I'm starting to get reluctant to provide support. Non-standard OS, virtualisation, non standard version of TV Server...Obviously MediaPortal is open source and we don't prevent you doing whatever you feel like you want or need. However, there are boundaries for what we can reasonably provide support for.mmmm</blockquote>

[QUOTE="mm1352000, post: 1037709, member: 82144"] Chris, TV Server doesn't just use any available tuners. You have to somehow indicate that a given tuner is capable of tuning a given channel. That is what mapping does: [url]http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/03_TV_Channels/2_Mapping[/url] If you don't do that, TV Server absolutely won't use a tuner. Channels are automatically mapped to a tuner when the tuner scans them in. Otherwise the mapping usually has to be done manually. I guess it is possible that DJBlu modified this in his version, however... From a glance at the logs, I think you're on the wrong track. I see the 20 second delay, but it comes [B]after [/B]TV Server reports having successfully tuned the channel. Tuning: So, the problem is client side. There is very little code between those two entries. As I recall, this is typical of what sometimes happens when IPv6 is enabled. Please disable the IPv6 protocol on your network adaptors and see if it makes any difference. I note: your setup is now at the point where I'm starting to get reluctant to provide support. Non-standard OS, virtualisation, non standard version of TV Server... Obviously MediaPortal is open source and we don't prevent you doing whatever you feel like you want or need. However, there are boundaries for what we can reasonably provide support for. mm mm [/QUOTE]

Verification