DiSEqC don't work (1 Viewer)

[mail_dkmaste]

Hallo

I have installed a DiSEqC 1.0 with 4 LNB.
1W, 5E, 13E and 19E.

I have tryed to setup DiSEqC 1.0 ind the Settings.
On the DiSEqC,
LNB1 is= 1W
LNB2 is= 5E
LNB3 is= 13E
LNB4 is= 19E

I set the DiSEqC to:
LNB1 = 1W = Level 1 A/A
LNB2 = 5E = Level 1 B/A
LNB3 = 13E = Level 1 A/B
LNB4 = 19E = Level 1 B/B

But MediaPortal only connect the first LNB = 1W, why???

I have tryed Mytheatre, and there the DiSEqC and all LNB i working!!!

I have af "Hauppauge NOVA ci S" with Technotrend DBA drivers
(old one, with works just fine)


Did i setup LNB wrong???

 

[markal]

DiSEqC scan

got the same problem on WinXP MCE 2005 and Technisat SkyStar 2 pci card. when i scan satelites (3LNB) TV server find only first satelite on DiSEqC 1.

allso seraching for answer

 

[throgwar]

Hello!
try attached files they are for TVServer RC1 build 19453.
files contains two patches:
1. I have added limited support for committed switches ( DiseqC specification 1.0) , it should work with DiseqC 1.1, 2.0 and 2.1. I have only one switch (v1.0) and its working very stable on AverMedia A700 card with bda drivers, so i cant test other cards/diseqc combos.
In SetupTV DiseqC settings select Comm1,2,3 or 4.
2. Fix for russian NTV plus provider. NTV Plus using Circular polarization, but SetupTV with Circular support from SVN ( LNB freq Lo 10750,Hi 0 and Switch 0 and Circular polarization ) scanning only Left polarization, i found out what with universal polarization and freq override to Lo 10750 , Hi 10750 and Swicth 0 TVSetup able to scan all transponders, so i have added new LNB type NTV Plus.
Last patch imo kinda wierd and i think it can be caused by 1. bad bda drivers from AverMedia or 2. incompatibility between Microsoft BDA Circular realization/definition and NTV Plus one.


download here: http://ts.nox.lv/drazas/mp/ntv-diseq.rar

edit: working only with generic bda cards, not going to work with haupage, technotrend, tecnisat and twinhan, because MP have separate code for ^^ cards.

 

[Zeee]

TV-Server Version: 1.0 RC1
MediaPortal Version: 1.0 RC1
MediaPortal Skin: BlueTwo Wide
Windows Version: Windows XP SP2
CPU Type: Athlon 64 X2 4400
HDD: Seagate 250 GB
Memory: 1 GB
Motherboard: Gygabyte GA-M56S-S3
Video Card: ATI Radeon HD 2400 Pro
Video Card Driver: Catalyst 8.4
Sound Card: Onboard
Sound Card AC3: Coaxial Out
Sound Card Driver:
1. TV Card: Gigabyte GT-PTV-TAF-RH
1. TV Card Type: Hybrid
1. TV Card Driver:
2. TV Card: KWorld DVB-S 100
2. TV Card Type: DVB-S
2. TV Card Driver:
3. TV Card: AverMedia DVB-S Pro
3. TV Card Type: DVB-S
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: DScaler 5
MPEG2 Audio Codec: ffdshow
h.264 Video Codec: ffdshow / cyberlink
Satelite/CableTV Provider:
HTPC Case: Thermaltake Mozart
Cooling:
Power Supply: 400 W
Remote: Logitech Harmony + Imon
TV: Panasonic Plasma
TV - HTPC Connection: DVI-HDMI


I have same problems with Avermedia DVB-S Pro card based on SAA7135 chip.. Diseqc switch is not working. Is it possible to add support to tvserver ? I have SVN 19603 installed..

 

[throgwar]

Hello,
Doesnt look it is so easy like in TvServer.


/Thtro:sorry:

 

[Zeee]

How can I add support for A700 card to tvserver ? I'm using rc1 with last svn for rc1...

 

[throgwar]

How can I add support for A700 card to tvserver ? I'm using rc1 with last svn for rc1...

Hello Zeee!
Please test patch and reply in thread about your findings, if you will have positive results, ill contact somebody from MP team for SVN patch.


Save original tvlibrary.dll from tvserver directory (usualy "C:\Program Files\Team MediaPortal\MediaPortal TV Server\") and replace from archive http://ts.nox.lv/drazas/mp/TVLibrary.zip RC1 19603.


tech info:
i have changed(in compliance with DiseqC specification) DiseqC commands send by TvServer .

TVLibrary/Implementations/DVB/ConditionalAccess/GenericBDAS.cs
example for Simple1AA before:
SendDiSEqCCommand(0x00);
after:
SendDiSEqCCommand(0xe01038f1);

command description:
E0 - Framing byte: Command from Master, No reply required, First transmission
10 - Address byte: Any LNB, Switcher or SMATV (Master to all...)
38 - command byte: Write N0 Write to Port group 0 (Committed switches)
F1 - data byte: data divided in 2 bit groups 1111 0001, high to clear lines and low to setup lines: 1111 clear all lines and 0001 for set pos AA (0010 for pos AB, 0100 for pos BA, 1000 for pos BB).

http://www.eutelsat.com/satellites/pdf/Diseqc/Reference docs/bus_spec.pdf

/Thro

 

[Zeee]

Unfortunately same thing again... My first dvb-s card is working ok (working with and without your patch) but avermedia card still not able to run diseqc switch...

Which driver are you using with your A700 card ?

 

[throgwar]

Hello!
im using driver 3.5.0.65_SW_Encoder_3.2.1.62_DVBS_Plug_In_1.0 for not hybrid A700 card.

i have re-uploaded tvlibrary.dll to http://ts.nox.lv/drazas/mp/TVLibrary.zip.
please test it and post tv.log.

 

[getyours_2005]

tested with tt1500 with rc2

TV-Server Version: tve3
MediaPortal Version: rc2
MediaPortal Skin: Blue two
Windows Version: XP sp2
CPU Type: AM2 AMD Athl64 X2 6000 3.0/89W/Box
HDD: Samsung 2000gb striped
Memory: 4096 kinston 800mhz
Motherboard: foxconn MCP61PM2MA-8KRS2HV
Video Card: Ati Radeon X1300
Video Card Driver: 8.453
Sound Card: Soundblaster audigy usb
Sound Card AC3:
Sound Card Driver: 5.1.2535.0
1. TV Card: tt1500 buget
1. TV Card Type: DVB-S
1. TV Card Driver: 5.0.0.6
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: core avc/ccc pack/
MPEG2 Audio Codec: combined commuity codec pack (ccc pack)
h.264 Video Codec: core avc /
Satelite/CableTV Provider: Astra 192/hotbird 13.0/astra 23.5/astra 28.5
HTPC Case: Dign
Cooling:
Power Supply:
Remote:
TV: Phillips 42 inh plasma
TV - HTPC Connection: DVI


tvserver doesn't start anymore