Reply to thread

Message

<blockquote data-quote="EW Thomas" data-source="post: 1171281" data-attributes="member: 156943">Sorry for the lack of data.. I am using a Prof 7301 Tuner Card in conjunction with a DS41 4X1 2.0 Compatible Switch.Not using all ports at the moment and using 2 fixed dishes currently. This is a stand by / back up system .One dish is pointed at 87° W SES 2&nbsp; and the other dish pointed at 101°W SES 1The SES 2 pointed dish is receiving KU and the SES 1 pointed dish is receiving C band.KU input is routed to Port 2&nbsp; of the switch .&nbsp; C Band input is routed to Port 4 of the switch.The feed line goes through a ground block straight to the 7301The post I mentioned previously is here&nbsp;&nbsp; <a href="https://forum.team-mediaportal.com/threads/diseqc-not-switching.32525/" target="_blank">https://forum.team-mediaportal.com/threads/diseqc-not-switching.32525/</a>&nbsp;&nbsp; The definitions I am seeking are those of the actual switch settings in MP&nbsp; such as 1BB, 1AA and so forth. Knowing what theserefer to in terms of relationship to Port A and such would greatly help the setup.&nbsp; I currently have the program working perfect and using just KU.If I scan in C Band I lose my KU signal and C band scans in strangely... sometimes even as a KU frequency with the correct program ID and PIDSbut of course you can't view it&nbsp; <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" />&nbsp;&nbsp; Also somethings scan in under wrong ID's This is not that great of a problem since I verify the correct channel by the A/V PIDS and other parameters.Both dishes are fixed dishes at the moment. Hopes are that once I have all the bugs worked out to cut it over to the main system so I can receive all the birds my area will allow,but the current LNB for KU there is a universal with 22K switching and that opens up a whole different Pandora's box that I'll cross later <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" />Basic System info is as follows&nbsp;&nbsp; MP 1.13 FinalOS&nbsp; Windows 10 ProMotherboard&nbsp; Intel 946GZISHD 4500 Video CardCore Duo 2.66 ProcessorSystem Memory Currently at 2 Gb but will be expanding to 8Gb shortly.KU Band LO&nbsp; &nbsp; 10750&nbsp; C Band LO&nbsp; &nbsp;&nbsp; 5150Hope this covers the basics of the problem,but if not let me know and I'll be happy to assist in getting whatever info you might need.Best Regards,Wayne</blockquote>

[QUOTE="EW Thomas, post: 1171281, member: 156943"] Sorry for the lack of data.. I am using a Prof 7301 Tuner Card in conjunction with a DS41 4X1 2.0 Compatible Switch. Not using all ports at the moment and using 2 fixed dishes currently. This is a stand by / back up system . One dish is pointed at 87° W SES 2 and the other dish pointed at 101°W SES 1 The SES 2 pointed dish is receiving KU and the SES 1 pointed dish is receiving C band. KU input is routed to Port 2 of the switch . C Band input is routed to Port 4 of the switch. The feed line goes through a ground block straight to the 7301 The post I mentioned previously is here [URL]https://forum.team-mediaportal.com/threads/diseqc-not-switching.32525/[/URL] The definitions I am seeking are those of the actual switch settings in MP such as 1BB, 1AA and so forth. Knowing what these refer to in terms of relationship to Port A and such would greatly help the setup. I currently have the program working perfect and using just KU. If I scan in C Band I lose my KU signal and C band scans in strangely... sometimes even as a KU frequency with the correct program ID and PIDS but of course you can't view it :) Also somethings scan in under wrong ID's This is not that great of a problem since I verify the correct channel by the A/V PIDS and other parameters. Both dishes are fixed dishes at the moment. Hopes are that once I have all the bugs worked out to cut it over to the main system so I can receive all the birds my area will allow,but the current LNB for KU there is a universal with 22K switching and that opens up a whole different Pandora's box that I'll cross later :) Basic System info is as follows MP 1.13 Final OS Windows 10 Pro Motherboard Intel 946GZIS HD 4500 Video Card Core Duo 2.66 Processor System Memory Currently at 2 Gb but will be expanding to 8Gb shortly. KU Band LO 10750 C Band LO 5150 Hope this covers the basics of the problem,but if not let me know and I'll be happy to assist in getting whatever info you might need. Best Regards, Wayne [/QUOTE]

Verification