Reply to thread

Message: <blockquote data-quote="mm1352000" data-source="post: 760388" data-attributes="member: 82144">Hi again AndrewAbsolutely - thank you! <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" />Right, understood.Ahhh, I think I understand what you're doing here - you're unticking the Optus D1 satellite "row" for the Nova S Plus and expecting those channels to no longer work. TV Server doesn't work like that. With the exception of the LNB override settings, the settings on the scanning pages have absolutely no effect *except while you're scanning*. Once the channels are found by a scan, the parameters are saved to your database so that TV Server will always know how to tune them (unless you delete the channels from the channel list in the "TV Channels" section). The other key thing is mappings. Mappings tell TV Server which cards can be used to tune each channel (you probably want to read --><a href="http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/03_TV_Channels/2_Mapping" target="_blank">this</a><--). In your situation, if you deleted the Nova mappings for the Optus D1 channels then the channels would no longer work - TV Server would still no how to tune them, but it would think that there were no cards that were able to tune them. Does that make sense?No offence taken. In fact I completely concur with you - there have been a number of people that I've encountered that have trouble with DiSEqC and Hauppauge cards. My own personal experience has been nothing but failure too. By asking if DiSEqC worked in other software for you I was merely trying to ascertain whether TV Server does have a problem with Hauppauge DiSEqC support, or whether Hauppauge DiSEqC support is just flaky in general...Exactly - when you use the overrides, they are applied globally. Therefore all your LNBs would have to have the same LOF. It is *much* better if you can use the "band" setting (in the satellite rows) as it enables you to [easily] use LNBs with different parameters. The band settings are LNB setting presets. If you turn off the overrides then change the "band" setting in the first satellite row you should see the settings in the override fields change. "Ku-Linear (Universal)" is a common setting in Europe. The values for that are 9750, 10600, 11700... etc. There are 10750 and 5150 presets - the "Ku-Circular" and "C-band" settings. The "Ku-Circular" setting doesn't work for me because it applies the wrong polarisation, but I'm able to use the "NA Bandstacked DP Ku-L..." or "NA Bandstacked Ku-Lo (FS..." very successfully. Anyhow, like I said, there is an easy work around even if you can't use the "NA Bandstacked" settings like I do... <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" />I have D1 + D2 + D3/C1... all with 10750 MHz LNBs. I helped Regs over at Geekzone to get D1 (10750) + IS5 (5150) working with MP only a couple of weeks ago. I can also help you, but I think you need to get your IS5 dish aligned properly first.11300 would be *worse* than 10750 as there aren't any compatible band presets. I could make it work by doing some maths with the transponder lists, but I don't think you'll need to go to that length. Try the "bandstacked" settings...Fair enough! <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" />For me, switching does work with Technotrend, Terratec, Twinhan, Technisat and TBS tuners. Just not with Hauppauge... <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite3" alt=":(" title="Frown    :(" loading="lazy" data-shortname=":(" />mm</blockquote>

Verification