DVB-IP MediaPortal IPTV Source Filter (1 Viewer)

Status
Not open for further replies.

KITSER

Portal Member
November 23, 2011
9
1
44
Home Country
Netherlands Netherlands
I've used this https://forum.team-mediaportal.com/...-mediaportal-guide-updated-2012-01-24.101529/ tutorial in combination with 2x HDHomerun HDHR3-EU (total 4 tuners) and DVBLink.

So I created a m3u file for all 4 tuners. In this m3u files are all my tv channels (like http://192.168.1.100:8081/dvblink/direct?client=TV-Kaart1&channel=10120000)

I added 4 DVB-IP MediaPortal IPTV Sources with each a differtent m3u file.

I mapped 1 "version" of each channel to a IPTV source and combined the channels on every card with each other.

I can stream 1 channel. But when a record an other channel the stream in MediaPortal freezes. In Mediaportal TV Server I see that 2 IPTV sources are in use. But when I look in the hdhomerun Config GUI utility, I see that only one tuner is in use. the other 3 are not in use.

What can I do?
 

Attachments

  • TV-Kaart1.m3u.txt
    2.6 KB
  • TV-Kaart2.m3u.txt
    2.6 KB
Last edited:

georgius

Retired Team Member
  • Premium Supporter
  • October 31, 2010
    1,376
    654
    Bratislava
    Home Country
    Slovakia Slovakia
    I've used this https://forum.team-mediaportal.com/...-mediaportal-guide-updated-2012-01-24.101529/ tutorial in combination with 2x HDHomerun HDHR3-EU (total 4 tuners) and DVBLink.

    So I created a m3u file for all 4 tuners. In this m3u files are all my tv channels (like http://192.168.1.100:8081/dvblink/direct?client=TV-Kaart1&channel=10120000)

    I added 4 DVB-IP MediaPortal IPTV Sources with each a differtent m3u file.

    I mapped 1 "version" of each channel to a IPTV source and combined the channels on every card with each other.

    I can stream 1 channel. But when a record an other channel the stream in MediaPortal freezes. In Mediaportal TV Server I see that 2 IPTV sources are in use. But when I look in the hdhomerun Config GUI utility, I see that only one tuner is in use. the other 3 are not in use.

    What can I do?
    As I understand one stream (playing or recording) is without problem. If you have complete logs, can you attach them here?
     

    KITSER

    Portal Member
    November 23, 2011
    9
    1
    44
    Home Country
    Netherlands Netherlands
    I've used this https://forum.team-mediaportal.com/...-mediaportal-guide-updated-2012-01-24.101529/ tutorial in combination with 2x HDHomerun HDHR3-EU (total 4 tuners) and DVBLink.

    So I created a m3u file for all 4 tuners. In this m3u files are all my tv channels (like http://192.168.1.100:8081/dvblink/direct?client=TV-Kaart1&channel=10120000)

    I added 4 DVB-IP MediaPortal IPTV Sources with each a differtent m3u file.

    I mapped 1 "version" of each channel to a IPTV source and combined the channels on every card with each other.

    I can stream 1 channel. But when a record an other channel the stream in MediaPortal freezes. In Mediaportal TV Server I see that 2 IPTV sources are in use. But when I look in the hdhomerun Config GUI utility, I see that only one tuner is in use. the other 3 are not in use.

    What can I do?
    As I understand one stream (playing or recording) is without problem. If you have complete logs, can you attach them here?

    Thanks for your reply. But I just found it is a DVBLink problem. First I'll try to fix that. Probably that will fix the problem.
     

    mm1352000

    Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    10 downloads of the RTSP plugin patch, but no comments... :(
    @Marin Bernard (and anybody else who has tried the patch), please could you tell us if the patch is working. Any feedback is appreciated - bad or good. We need to know either way so that we can fix or commit the patch.
     

    MayerH

    Portal Member
    November 20, 2005
    10
    0
    124
    Hi,
    i tested the last days with mit new SAT>IP-Equiqument and Mediaportal 1.4.
    And it works great.
    I use a Triax TSS 400 SAT>IP Converter and also Triax IP-100 Clients.
    After some Problems scanning the satelite with M3U-Lists from Internet i used WireShark for sniffing the communication between the IP-100 and the TSS 400.
    I can see on the Protocoll, that the IP-100 use RTSP for communication with the Converter. And he always gives the full Parameters as described in the Protocoll-Sepcifications.
    Mediaportal TV-Server-Configuration crashed, when i used the Parameters like the IP-100-Client does it.
    Also with the patch from Post 1 in this thread.
    So i do some tests with VLC, RTSP and HTTP.
    When i Use the complete Parameters with a HTTP-Request, it works always.
    So i modifyed my M3U, so it Looks like this:
    (triax-tss400 is the DNS-Name for my converter)

    #EXTM3U
    #EXTINF:-1,Das_Erste_HD
    http://triax-tss400/?src=1&freq=114...ec=23&ro=0.35&pids=0,5100,5101,5102,5103,5106
    #EXTINF:-1,ZDF_HD
    http://triax-tss400/?src=1&freq=113...&ro=0.35&pids=0,6100,6110,6120,6121,6123,6122
    #EXTINF:-1,Bayerisches_Fernsehen_Sud_HD
    http://triax-tss400/?src=1&freq=115...ec=23&ro=0.35&pids=0,5200,5201,5202,5203,5206
    #EXTINF:-1,Sat_1
    http://triax-tss400/?src=1&freq=125...ype=qpsk&fec=56&ro=0.35&pids=0,96,255,256,259

    (i added the Parameters for mtype, fec and ro).
    Now i can scan with Mediaportal and view all the Stations.
    Next Test is now Recording and look if EPG works.

    Greetings
     

    ajs

    Development Group
  • Team MediaPortal
  • February 29, 2008
    16,059
    11,141
    Kyiv
    Home Country
    Ukraine Ukraine
    For 1.4, too, need to put?
     

    Dennis84

    New Member
    February 26, 2012
    3
    2
    Home Country
    Netherlands Netherlands
    Last year I tried to get the DVB-IP working in MediaPortal but I never managed to succeed. Today I tried it again with a fresh installation of Media Portal and with the latest IPTV Source Filter. I am still getting "No signal" error when scanning for channels. The m3u file I use is working directly in VLC player. What do I need to do to make this work?
     

    Attachments

    • MPIPTVSource.txt
      79.3 KB
    Status
    Not open for further replies.

    Users who are viewing this thread

    Top Bottom