Dvico Fusion BDA Driver Issue (1 Viewer)

[gnmason]

Hi There

Im running TV Server and it has picked up the BDA drivers for my new Dvico FusionHDTV Express DVB-T card. This card is a PCI-e card with dual digital and dual analog tuners.

The issue is that I cannot tune any analog channels as TV server picks the analog tuner up as FusionHDTV NTSC/ATSC and not PAL. I presume this is why it wont pick up local analog channels. I'm in Melbourne, Australia

Any ideas how to resolve this.

 

[Jumbles72]

I have the Fusion HDTV Dual express. Hybrid card, sounds similar.
The only problem i had when setting up was that it still had all the settings from my previous usb tuner.
I'm not sure how i can help other than saying, :sorry: keep trying.

 

[cavarks]

Hi There

Im running TV Server and it has picked up the BDA drivers for my new Dvico FusionHDTV Express DVB-T card. This card is a PCI-e card with dual digital and dual analog tuners.

The issue is that I cannot tune any analog channels as TV server picks the analog tuner up as FusionHDTV NTSC/ATSC and not PAL. I presume this is why it wont pick up local analog channels. I'm in Melbourne, Australia

Any ideas how to resolve this.

Did you get this solved? I have the same problem.

M.

 

[diablosv]

I get the FusionHDTV NTSC/ATSC thing show up on the TV server with a FusionHdtv card with only a single dvb-t tuner and nothing else!

 

[hounddog]

Dvico Fusion BDA Driver Issue no analog tuning

I have the same issue here also with the exact same card and have not been able to sovle it either any help would be appreciated by all of us. I am glad its not just me having that problem cheers.

 

[cavarks]

I get the FusionHDTV NTSC/ATSC thing show up on the TV server with a FusionHdtv card with only a single dvb-t tuner and nothing else!

Yer same here.. but i can not get any signal detected? And i can't get s-video working on this card either..

M.

 

[dale_mac]

I have an older FusionHDTV Dual Digital card. Using the newer drivers, the Bluebird (USB) portion showed up as NTSC/ATSC even though it's a purely DVB-T card.
I kept going back to older drivers until I found one that recognised it as DVB-T. Luckily, DVico keep their older drivers available. Maybe you could try doing that.
Unfortunately, I decided to remove the card and use something else because the USB portion of the card didn't always work properly after resume from hibernation. I would randomly get a "Can't start timeshift. No signal" error.

 

[cavarks]

I have an older FusionHDTV Dual Digital card. Using the newer drivers, the Bluebird (USB) portion showed up as NTSC/ATSC even though it's a purely DVB-T card.
I kept going back to older drivers until I found one that recognised it as DVB-T. Luckily, DVico keep their older drivers available. Maybe you could try doing that.
Unfortunately, I decided to remove the card and use something else because the USB portion of the card didn't always work properly after resume from hibernation. I would randomly get a "Can't start timeshift. No signal" error.

I decided to toss the card, as caused it caused more problems than it was worth (which in my opinion is not much.) Some of the older drivers caused different issues, will probably ebay it.