Reply to thread

Message

<blockquote data-quote="ldv" data-source="post: 149396" data-attributes="member: 50495">Hi, i've started with 0.2.2.0 and latest drivers for dvico, which at this point are 3.62New drivers are not in the cardlist, so i had to add them as described. At this point card does get recognized but would not autotune. However, Dvico's software does not exhibit a slightest sign of a problem tuning in either digital or analog channels. So.. i rolled back drivers to 3.51. At this point, card is recognized as already pre-configured. However, it still would not autotune. So all symptoms are the same. Dvico 3.51 does not have a problem tuning (when installed). Finally, i also tried varios mediaportal versions -- 0.2.2.0, 0.2.2.0 latest SVN, 0.2.1.0, 0.2.0.0 -- all with exactly the same symptoms -- card recognised, but would not autotune. Another peculiar thing that while tuning, signal strength in the configuration dialog is high, but signal quality gauge is always 0. I am new to mediaportal+TV card issues, but i did do a decent homework of searching this forum for dvico configuration problems before doing this post, and can be farely sure i tried everything relevant i could find -- and still clueless. Dvico drivers do not seem to be a factor, since dvico software works, as well as hardware malfunction is not a factor either...&nbsp; but mediaportal behavior doesn't change a bit with different version, either, so frankly i've ran out of things to try at this point...Thank you very much for any clues.-d</blockquote>

[QUOTE="ldv, post: 149396, member: 50495"] Hi, i've started with 0.2.2.0 and latest drivers for dvico, which at this point are 3.62 New drivers are not in the cardlist, so i had to add them as described. At this point card does get recognized but would not autotune. However, Dvico's software does not exhibit a slightest sign of a problem tuning in either digital or analog channels. So.. i rolled back drivers to 3.51. At this point, card is recognized as already pre-configured. However, it still would not autotune. So all symptoms are the same. Dvico 3.51 does not have a problem tuning (when installed). Finally, i also tried varios mediaportal versions -- 0.2.2.0, 0.2.2.0 latest SVN, 0.2.1.0, 0.2.0.0 -- all with exactly the same symptoms -- card recognised, but would not autotune. Another peculiar thing that while tuning, signal strength in the configuration dialog is high, but signal quality gauge is always 0. I am new to mediaportal+TV card issues, but i did do a decent homework of searching this forum for dvico configuration problems before doing this post, and can be farely sure i tried everything relevant i could find -- and still clueless. Dvico drivers do not seem to be a factor, since dvico software works, as well as hardware malfunction is not a factor either... but mediaportal behavior doesn't change a bit with different version, either, so frankly i've ran out of things to try at this point... Thank you very much for any clues. -d [/QUOTE]

Verification