Denmark
I have gotten a strange problem after upgrade from 1.1.3 (which ran for many months without issue). When starting MediaPortal TV I get EPG for last used channel. I do not have auto TV on. However when I enter the TV guide sometimes no data is avaiable and other times all visible channels have EPG data. But when I have data and scroll down to the next channel not visible on screen all epg data disappears - also from the channels that just had them...
I've noticed that mysqld.exe is using about 50% cpu for about a minute when I enter the TV, TV Guide or selects another channel without data in the TV guide (not activating the channel just clicking on its entry). Once I do start a given channel I have no problems with watching it. I have not had any data in the miniepg yet.
EPG is set to gathering data for selected channels in my "all channels" group where only about 1/6 is active.
I have tried disabling and reenabling EPG CRC, and selecting only two languages to look for - none of which helped.
I have not yet tested a clean install since the original tv channel scan (in 1.1.3 at least) missed some channels not in the config file spectrum. I forget where but I had a hard time modifying this and don't want to rediscover how to do it unless I really have to.
I have installed Steamed MP skin - but the issue is there when i switch to default wide or run in debug mode where attached logs are from.
MediaPortal Version: MediaPortal 1.2.0 RC
MediaPortal Skin: Default Wide
Windows Version: Windows 7 Ultimate (32 bit)
CPU Type: AMD X2 4200+
HDD: OCZ Vertex 2 64GB (OS)
HDD: Seagate Momentus 7200.2 160GB (DATA)
Memory: 2 GB DDR2
Motherboard: Asus A8N-VM CSM
Video Card: ATI Radeon HD 4350
Video Card Driver: 11.6
Sound Card: SoundMAX integrated Digital HD Audio
Sound Card AC3: optical out
Sound Card Driver: 6.10.1.6100
1. TV Card: TT-Budget C-1501 with CI & CAM & provider card
1. TV Card Type: DVB-C
1. TV Card Driver: 5.0.1.8 (BDA)
MPEG2 Video Codec: Microsoft default win7
MPEG2 Audio Codec: Microsoft default win7
h.264 Video Codec: Microsoft default win7
Satelite/CableTV Provider: Yousee cabel (DK - Copenhagen)
HTPC Case: Silverstone LC11M
Cooling:
Power Supply: 320W
Remote: Logitech Harmony One
TV: Samsung FullHD 37"
TV - HTPC Connection: HDMI
I've noticed that mysqld.exe is using about 50% cpu for about a minute when I enter the TV, TV Guide or selects another channel without data in the TV guide (not activating the channel just clicking on its entry). Once I do start a given channel I have no problems with watching it. I have not had any data in the miniepg yet.
EPG is set to gathering data for selected channels in my "all channels" group where only about 1/6 is active.
I have tried disabling and reenabling EPG CRC, and selecting only two languages to look for - none of which helped.
I have not yet tested a clean install since the original tv channel scan (in 1.1.3 at least) missed some channels not in the config file spectrum. I forget where but I had a hard time modifying this and don't want to rediscover how to do it unless I really have to.
I have installed Steamed MP skin - but the issue is there when i switch to default wide or run in debug mode where attached logs are from.
MediaPortal Version: MediaPortal 1.2.0 RC
MediaPortal Skin: Default Wide
Windows Version: Windows 7 Ultimate (32 bit)
CPU Type: AMD X2 4200+
HDD: OCZ Vertex 2 64GB (OS)
HDD: Seagate Momentus 7200.2 160GB (DATA)
Memory: 2 GB DDR2
Motherboard: Asus A8N-VM CSM
Video Card: ATI Radeon HD 4350
Video Card Driver: 11.6
Sound Card: SoundMAX integrated Digital HD Audio
Sound Card AC3: optical out
Sound Card Driver: 6.10.1.6100
1. TV Card: TT-Budget C-1501 with CI & CAM & provider card
1. TV Card Type: DVB-C
1. TV Card Driver: 5.0.1.8 (BDA)
MPEG2 Video Codec: Microsoft default win7
MPEG2 Audio Codec: Microsoft default win7
h.264 Video Codec: Microsoft default win7
Satelite/CableTV Provider: Yousee cabel (DK - Copenhagen)
HTPC Case: Silverstone LC11M
Cooling:
Power Supply: 320W
Remote: Logitech Harmony One
TV: Samsung FullHD 37"
TV - HTPC Connection: HDMI
