firedtv-c (1 Viewer)

[Lotsofjazz]

thanks again
I have removed one firedtv from mine comp.
After this i cleared the list and i scanned al the channela again with al the 3 options under tv-servers /comp/edit, and with every of this options he found 163 channels but only one 1 channel {zenderoverzicht} is green.
After this i have turn the amplifer to the half and set the firedtv under tv-servers /comp/edit on cam enabled,grab epg and Allow this card to preload, and clear mine channellist and scan again, with the shame results as before.
I took some pics of mine module and load them on this page, i hope you can do something with

Yes, green means it is a free to air channel that even someone without a Ziggo Abonnement can see. All the red ones are scrambled and you can only see when you have a smartcard.. and you have, so that is good!

Just give it a try if you can watch TV now, the standard package channels like Ned 1, 2, 3 RTL4,5,7,8 etc should not be a problem, even Eurosport HD and Brava you should be able to watch now.

On the module I have the option "Force reading original PMT" set to OFF, the rest seems OK (I have version 3.14, you allready are on 3.16 which is slightly different)

If everything works, just add the second card, set everything as with the first card and try to scan the second card.

You are not far away now

Lots

 

[xallias]

Green means that is not scrambled, in other words free to air.

thanks for responding but now i still don`t now why firedtv will not unscramble mine cards.

 

[Lotsofjazz]

You misunderstand .. I think, did you allready try to watch TV in mediaportal? Because you found 163 channels..,WHICH IS OK! Even if it is indicated as a red scrambled channel in TV server setup. You see, Ziggo just scrambles everything, so nobody can watch for free.. exept the Zenderindeling channel (or whatever they call it)

I sent you a Private Message (click the link below your username at the top of this page) with some detailed instructions in dutch, maybe you must install a codec.

One thing I forgot to tell in the PM is that your smartcard may be inserted in the CAM the wrong way, just remove the smartcard and insert again flipped 180 degrees.. you never know.. It was one of my mistakes in the beginning as well. You see the TV server setup scanner does its job before passing through the CAM and smartcard, so you won't be triggered the smartcard is inserted the wrong way.. This may be the first thing for you to check right now!!

You can check using the CI module tool, select smartcard details/information, click OK, if it says no smartcard installed or just nothing appears or something similar.. you have found your problem If a smartcard is installed correctly one or more lines with numbers must appear (refresh may be required)

One last thing, after a rescan of channels it may take some time before the EPG is updated again.. it can take more then an hour sometimes to fill all holes.

I am sure we are getting there...

Lots

 

[xallias]

You misunderstand .. I think, did you allready try to watch TV in mediaportal? Because you found 163 channels..,WHICH IS OK! Even if it is indicated as a red scrambled channel in TV server setup. You see, Ziggo just scrambles everything, so nobody can watch for free.. exept the Zenderindeling channel (or whatever they call it)

I sent you a Private Message (click the link below your username at the top of this page) with some detailed instructions in dutch, maybe you must install a codec.

One thing I forgot to tell in the PM is that your smartcard may be inserted in the CAM the wrong way, just remove the smartcard and insert again flipped 180 degrees.. you never know.. It was one of my mistakes in the beginning as well. You see the TV server setup scanner does its job before passing through the CAM and smartcard, so you won't be triggered the smartcard is inserted the wrong way.. This may be the first thing for you to check right now!!

You can check using the CI module tool, select smartcard details/information, click OK, if it says no smartcard installed or just nothing appears or something similar.. you have found your problem If a smartcard is installed correctly one or more lines with numbers must appear (refresh may be required)

One last thing, after a rescan of channels it may take some time before the EPG is updated again.. it can take more then an hour sometimes to fill all holes.

I am sure we are getting there...

Lots

I give Lots a great aplause and i`am realy thank him for helping me with the solution again lots for your time and your patience

 

[Lotsofjazz]

Its OK, you'r welcome.. thats how we are in this community, we just help everybody untill it works.

I am glad it works now, enjoy watching all these Chrismass movies!

Lots