Reply to thread

Message

<blockquote data-quote="corvy" data-source="post: 247159" data-attributes="member: 28526">Nah, but I need &quot;kid-free&quot; livingroom to be able to open up the &quot;magic box&quot;. I did this and I found out that there is more to this problem. First I tried removing the SmartWI like you wished for (!) and this solved the problem, so you are correct, the SmartWI is involved (running firmware 2.43 Beta 8 T0 by the by). I then tried moving the CAM from the new TV card to the old (the one not working with the SmartWI) and connected the SmartWI and now it worked fine. So it seems the CAM is involved. I have two Conax Cams, both version 4.00e, but one is HW version 1.0 and the other 1.1. The one that worked with the old tv card and SmartWI was 1.1. So in conclusion I then took the 1.0 Conax CAM and connected to the newer floppydtv and badabing, now that works aswell with the SmartWI. Suddenly I had two working tv cards again!To sum it up, the new tv card with the old CAM and SmartWI = OK, the old tv card with the new CAM and SmartWI = OK. Any combination of the above mentioned with DVBviewer = OK. So in the end, the problem is with Mediaportal and not anything else, but at least I found a solution for me that gives me two working tuners again. Just as a final note, the old combination of CAMs and SmartWI worked a few weeks back, it broke sometime in the last month or so. It just took a little while till I understood what the problem was. Thanks for your help (the last post about the CAM was very helpful to put me on the track!, thanks!).</blockquote>

[QUOTE="corvy, post: 247159, member: 28526"] Nah, but I need "kid-free" livingroom to be able to open up the "magic box". I did this and I found out that there is more to this problem. First I tried removing the SmartWI like you wished for (!) and this solved the problem, so you are correct, the SmartWI is involved (running firmware 2.43 Beta 8 T0 by the by). I then tried moving the CAM from the new TV card to the old (the one not working with the SmartWI) and connected the SmartWI and now it worked fine. So it seems the CAM is involved. I have two Conax Cams, both version 4.00e, but one is HW version 1.0 and the other 1.1. The one that worked with the old tv card and SmartWI was 1.1. So in conclusion I then took the 1.0 Conax CAM and connected to the newer floppydtv and badabing, now that works aswell with the SmartWI. Suddenly I had two working tv cards again! To sum it up, the new tv card with the old CAM and SmartWI = OK, the old tv card with the new CAM and SmartWI = OK. Any combination of the above mentioned with DVBviewer = OK. So in the end, the problem is with Mediaportal and not anything else, but at least I found a solution for me that gives me two working tuners again. Just as a final note, the old combination of CAMs and SmartWI worked a few weeks back, it broke sometime in the last month or so. It just took a little while till I understood what the problem was. Thanks for your help (the last post about the CAM was very helpful to put me on the track!, thanks!). [/QUOTE]

Verification