Reply to thread

Message

<blockquote data-quote="trevor" data-source="post: 166378" data-attributes="member: 25806">This is intriguing me as much as it frustrating you, I have this working fine and did a complete MP/TV3 without effecting things.All I can offer is what I would do now; you might have done this already if so I apologise..From TVSetup go to each card and ‘Add SVHS/VHS channels’, this should add 9 extra channels for each card that will appear at the top of your channels list in the TV Channels section - CVBS#1-3 on x, SVHS#1-3 on x, and RGB#1-3 on x – with x being the card no. 1 &amp; 2 in your case I would guess..From here I would preview all the new channels, starting with the SVHS#1 on both cards, when/if you get a picture id the card/STB by manually calling up a menu or similar on the STB.This should tell you which input each card is using and it should be SVHS#1 for both cards. When I do this I get picture on SVHS# on both cards, I do not keep these channels in the DB I only used them for testing.This is what I did when I first put the system together so identify which STB went to what card (cables everywhere at the time!)&nbsp; and things have worked ever since.Would be interested in the results…CheersTrevor</blockquote>

[QUOTE="trevor, post: 166378, member: 25806"] This is intriguing me as much as it frustrating you, I have this working fine and did a complete MP/TV3 without effecting things. All I can offer is what I would do now; you might have done this already if so I apologise. . From TVSetup go to each card and ‘Add SVHS/VHS channels’, this should add 9 extra channels for each card that will appear at the top of your channels list in the TV Channels section - CVBS#1-3 on x, SVHS#1-3 on x, and RGB#1-3 on x – with x being the card no. 1 & 2 in your case I would guess. . From here I would preview all the new channels, starting with the SVHS#1 on both cards, when/if you get a picture id the card/STB by manually calling up a menu or similar on the STB. This should tell you which input each card is using and it should be SVHS#1 for both cards. When I do this I get picture on SVHS# on both cards, I do not keep these channels in the DB I only used them for testing. This is what I did when I first put the system together so identify which STB went to what card (cables everywhere at the time!) and things have worked ever since. Would be interested in the results… Cheers Trevor [/QUOTE]

Verification