[Hauppauge PVR150MCE] Hear sound, no video (1 Viewer)

[Liberteh]

Hi!

I have a PVR150MCE (SE) TV Card.
Problem is, when I auto-tune, I hear sound, but the image does not ever contain any tv-channels (only black/snow) also is says that the signal quality is at 1%.
This in the MP config -> Television -> my card -> auto-tune.
Can anybody help me out?
The hardware is configured correctly with the correct drivers from the cd.
But no software (WinTV or somekind) did come with it..
I Checked the signal on my input on the TV, and it's perfect quality.

Plz help

 

[FlipGer]

Hi,

did you set the correct input settings?
Input: antenna / cable
Country: ?

Flip.

 

[Maschine]

Vista x64 with >= 3 GB Ram?

 

[Liberteh]

Yes, tried both. I have analoge cable and I'm from the netherlands, I also put that in there.
I also tried downloading the channels. Only, this has the same problem (only sound) in the configurator and in MP itself.
I'm using XP SP3 32bit.

 

[Spragleknas]

It would probably help if you:
- enter your system specs in User CP -> My system (remember to enable)
- Paste your logs (use: Start -> --> MediaPortal -> MP Logs Collector

 

[Liberteh]

I updated my sys info, and here's the logs.

I did a fresh import of my town's channel list (with the download feature).
Then I go into media portal, and then TV. Then I change channel (which gives the same result: looking like you have almost nihil reception)
Then I turn the tv on/off (in MP) and still same result.

 

[Liberteh]

Spragleknas: you have nearly a similar setup as me. I didn't get no actual software with the card, so the only way to test if i can recieve channels is in MP.

 

[Spragleknas]

The sound you get, is it from channels, or ... ?

 

[Liberteh]

Just the perfect (as in, the way I want it to sound) sound I want to hear. So it's the right channel sound, great quality, but I only see black or black blurred (no colour what so ever)

 

[Spragleknas]

2008-08-20 17:22:08.625000 [ERROR][MPMain]: Unable to start pluginrocessPlugins.DirectTVTunerPlugin.TunerPlugin exceptionystem.ArgumentOutOfRangeException: Not a valid COM port
Parameter name: PortName
Actual value was COM1.

I'm reaching here, but this ^ is from your error log. Why have you enabled the DirectTV plugin? Did you try disabling it?

Also: MP version? TVServer - yes/no? Please fill in all info in "My system"