Reply to thread

Message

Hi,

after hundreds of tries it works. Here is my workaround.

1. Reset the Harmony
   - Remove batteries
   - Press POWER
   - connect USB-Cable
   - realese the POWER-Button
   ===> the Display shows "Safe Mode!"

2. Install Firmware and configuration
   - If you use Harmony Remote Software 7 you can find it on the top under
   downloads
   - Somtimes a message apears something like "You have already the newest
   firmware" ignore and install it
   - install configuration

3. If the installation of the firmware don't work cause of the "Safe Mode!" Message:
- take out the batteries
- disconnect the usb
- hold the '2' button down while you connect the usb cable
- continue holding the '2' button until your configuration boots up
- now you can install the firmware

4. learn the codes as discribed above by dnasini.

Thanks for your help dnasini.

greetings frankteb

P.S.orry about my english, hope you understand it.

<blockquote data-quote="frankteb" data-source="post: 127043" data-attributes="member: 22926">Hi,after hundreds of tries it works. Here is my workaround.1. Reset the Harmony&nbsp;&nbsp; - Remove batteries&nbsp;&nbsp; - Press POWER&nbsp;&nbsp; - connect USB-Cable&nbsp;&nbsp; - realese the POWER-Button&nbsp;&nbsp; ===&gt; the Display shows &quot;Safe Mode!&quot;2. Install Firmware and configuration&nbsp;&nbsp; - If you use Harmony Remote Software 7 you can find it on the top under&nbsp;&nbsp; &nbsp; &nbsp;&nbsp; downloads&nbsp;&nbsp; - Somtimes a message apears something like &quot;You have already the newest &nbsp; &nbsp;&nbsp; firmware&quot; ignore and install it&nbsp;&nbsp; - install configuration3. If the installation of the firmware don't work cause of the &quot;Safe Mode!&quot; Message:&nbsp; &nbsp; - take out the batteries&nbsp; &nbsp; - disconnect the usb&nbsp; &nbsp; - hold the '2' button down while you connect the usb cable&nbsp; &nbsp; - continue holding the '2' button until your configuration boots up&nbsp; &nbsp; - now you can install the firmware4. learn the codes as discribed above by dnasini.Thanks for your help dnasini.greetings franktebP.S.<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite5" alt=":confused:" title="Confused&nbsp; &nbsp; :confused:" loading="lazy" data-shortname=":confused:" />orry about my english, hope you understand it.</blockquote>

[QUOTE="frankteb, post: 127043, member: 22926"] Hi, after hundreds of tries it works. Here is my workaround. 1. Reset the Harmony - Remove batteries - Press POWER - connect USB-Cable - realese the POWER-Button ===> the Display shows "Safe Mode!" 2. Install Firmware and configuration - If you use Harmony Remote Software 7 you can find it on the top under downloads - Somtimes a message apears something like "You have already the newest firmware" ignore and install it - install configuration 3. If the installation of the firmware don't work cause of the "Safe Mode!" Message: - take out the batteries - disconnect the usb - hold the '2' button down while you connect the usb cable - continue holding the '2' button until your configuration boots up - now you can install the firmware 4. learn the codes as discribed above by dnasini. Thanks for your help dnasini. greetings frankteb P.S.:Sorry about my english, hope you understand it. [/QUOTE]