Ongoing Help with Building into Silverstone LC11M case & VFD (1 Viewer)

Maus

Portal Member
August 9, 2005
14
0
UK
Hi,

im connecting the case and the mobo together. I have connected all of the basics like HDD and power switches, fans etc. The system powers up fine, but I get nothing on the VFD.

I have connected the USB and other power switch connections, as detailed in the LC11M instructions.

Should I be seeing anything on the display when i power up?

Thanks
 

CHli

Portal Pro
July 5, 2005
1,251
14
Switzerland
Home Country
Switzerland Switzerland
You have to install the IMon Software provided with the case... (at least the IMon drivers, which let you handle the remote control and the VFD)
 

Jetboy

Portal Pro
April 15, 2005
187
1
Stockholm
Home Country
Sweden Sweden
I'm not sure how the Silverstone case is bundled, but you might need to download the DL port i/o from http://www.driverlinx.com/DownLoad/dnload.htm#Windows 95/NT Port I/O Driver.

Also, a while back I heard from a few people that the VFDs in their Silverstone cases was shorted out because the pins on the display were in contact with the case front. If all else fails, you might want to check that out.
 

Maus

Portal Member
August 9, 2005
14
0
UK
Guys,

thanks for your help, all is well after installing all of the software and checking connections.
 

Users who are viewing this thread

Top Bottom